Yarisworld Archive

Finally i installed Cold Air Intake system on my 1.3 yaris ! K&N

38 posts · 27,041 views

Jack YakOriginal postInside My Yaris · Feb 1, 2012#1
Hi everyone ..

Finally i installed Air intake system "K&N Sport Fillter" in my 1.3 sedan yaris

it has a coooool sound after 3000 RPM

but i don't feel any improvement in acceleration ! ! !

someone told me that the air mass sensor need readjustment but i don't know how could i do it ? ?

is that true ?

there's some pics during installing ..

Picture not included in this copy

Picture not included in this copy

Replies 37

Betriventedmonton · Feb 1, 2012#2
The MAF may benefit from being cleaned, there is no adjustment for it. To clean the MAF use an electronics cleaner in a spray can
Jack YakThread starterInside My Yaris · Feb 1, 2012#3
you thought that the dust affected the sport air filter ? ?
Betriventedmonton · Feb 1, 2012#4
Mass Air Flow sensor.
BEEFnorth carolina · Feb 1, 2012#5
MAF = mass air flow (sensor)

it is the sensor that is in the new tube. it is held in by two screws and has a wiring harness on it. in your picture, it is between the two hose clamps. on the nice shiny hose, it is the dirty dusty thing that you put back on it.
Jack YakThread starterInside My Yaris · Feb 1, 2012#6
yes i got it ... but you thought that the dust could affect the sport air filter ? i could feel any improvement in acceleration if i well cleaned it ?
1.5Tampa · Feb 1, 2012#7
Dirtiest engine bay ever. And 1.3?
goliath1812Ocala Florida · Feb 1, 2012#8
did you disconnect the negative from the battery to let the ECU reset?
Jack YakThread starterInside My Yaris · Feb 1, 2012#9
Originally Posted by 1.5 ↑
Dirtiest engine bay ever. And 1.3?
:( i'm gonna clean it ,, but i did not do it before because someone told me that it's too bad if you cleaned your engine and you don't have to do it

and yes sir it's 1.3

Originally Posted by goliath1812 ↑
did you disconnect the negative from the battery to let the ECU reset?
yes i did

i disconnected it and reconnect after about 10 min ! NO change NO improvement !
kounj · Feb 1, 2012#10
Whoever told you not to clean your engine is a dumbass.
ilikericesavannah, ga · Feb 1, 2012#11
Originally Posted by Jack Yak ↑
yes i got it ... but you thought that the dust could affect the sport air filter ? i could feel any improvement in acceleration if i well cleaned it ?
Basicly what he was trying to tell you.

If you unscrew those 2 phillips and disconnect the sensor, you can pull it out. Then you can clean the little shiny part in the sensor that is shown in the picture attached. It usually gets dirty and is a good idea to clean it every now and then.. esp with a filter like you have there. Those filter doent filter out as well as the paper ones do, but thats for air flow reasons..

I would disconnect your battery again, and clean the MAF sensor. then put it back. Your ecu should reset your learned driving habbits.. You MAY feel a throttle response difference but unlikely. But it doesnt hurt to clean it.

1 attachment not included in this copy

1.5Tampa · Feb 1, 2012#12
Originally Posted by Jack Yak ↑
and yes sir it's 1.3
I thought in 07 the yaris sedan was only available in 1.5L

http://en.wikipedia.org/wiki/Toyota_Vitz

Originally Posted by kou ↑
Whoever told you not to clean your engine is a dumbass.
right... 🤷
Jack YakThread starterInside My Yaris · Feb 1, 2012#13
Originally Posted by kou ↑
Whoever told you not to clean your engine is a dumbass.
right you are

Originally Posted by ilikerice ↑
Basicly what he was trying to tell you.

If you unscrew those 2 phillips and disconnect the sensor, you can pull it out. Then you can clean the little shiny part in the sensor that is shown in the picture attached. It usually gets dirty and is a good idea to clean it every now and then.. esp with a filter like you have there. Those filter doent filter out as well as the paper ones do, but thats for air flow reasons..

I would disconnect your battery again, and clean the MAF sensor. then put it back. Your ecu should reset your learned driving habbits.. You MAY feel a throttle response difference but unlikely. But it doesnt hurt to clean it.
you mean that i have to clean the shiny part in the sensor followed by disconnecting the battery ,, so that i MAY feel some improvement ,,, but you are not sure that i'll feel improvement in acceleration ? ? right ?

Originally Posted by 1.5 ↑
I thought in 07 the yaris sedan was only available in 1.5L

http://en.wikipedia.org/wiki/Toyota_Vitz



right... 🤷
No i have 07 yaris sedan with 1.3L engine
goliath1812Ocala Florida · Feb 1, 2012#14
A new intake will probably only give an extra 1-2 hp over stock, which you probably wont even notice. It's never a bad idea though to clean your MAF. Especially with how dirty your engine bay is.
Jack YakThread starterInside My Yaris · Feb 1, 2012#15
Originally Posted by goliath1812 ↑
A new intake will probably only give an extra 1-2 hp over stock, which you probably wont even notice. It's never a bad idea though to clean your MAF. Especially with how dirty your engine bay is.
you mean no increase in 0-100 acceleration "for example .. " occurs with installing new intake at all ? ?

guys : should i change the filter place ? or that's good place ?

i would like to move it slightly left and slightly down
ilikericesavannah, ga · Feb 1, 2012#16
Originally Posted by Jack Yak ↑
you mean that i have to clean the shiny part in the sensor followed by disconnecting the battery ,, so that i MAY feel some improvement ,,, but you are not sure that i'll feel improvement in acceleration ? ? right ?
you dont have to disconnect the battery to clean it.. but it would help..

disconnecting the battery will reset the ecu. the ecu learns driving habbits and compensates. being that you already disconnected it to begin with, you dont have to. unless u get a code.

Am I the only one 😕 about this thread
1.5Tampa · Feb 1, 2012#17
Originally Posted by ilikerice ↑
you dont have to disconnect the battery to clean it.. but it would help..

disconnecting the battery will reset the ecu. the ecu learns driving habbits and compensates. being that you already disconnected it to begin with, you dont have to. unless u get a code.

Am I the only one 😕 about this thread
Dude i am confused. And I still disagree on there being a 1.3 sedan in 07 unless its a CAD import.
1.5Tampa · Feb 1, 2012#18
Originally Posted by goliath1812 ↑
A new intake will probably only give an extra 1-2 hp over stock, which you probably wont even notice. It's never a bad idea though to clean your MAF. Especially with how dirty your engine bay is.
Is this why you are so graciously giving yours to me? lol
Jack YakThread starterInside My Yaris · Feb 1, 2012#19
Originally Posted by 1.5 ↑
Dude i am confused. And I still disagree on there being a 1.3 sedan in 07 unless its a CAD import.
it's middle east version dude ... in middle east the 1.5L engine only with 2010 , 2011 , 2012 ! before 2010 all yaris in middle east with 1.3L engine

Originally Posted by ilikerice ↑
you dont have to disconnect the battery to clean it.. but it would help..

disconnecting the battery will reset the ecu. the ecu learns driving habbits and compensates. being that you already disconnected it to begin with, you dont have to. unless u get a code.

Am I the only one 😕 about this thread
A Code ! ! ! wat do you mean by get a code ? ?
Betriventedmonton · Feb 1, 2012#20
^ Your location says new york, hence the confusion.
1.5Tampa · Feb 1, 2012#21
Originally Posted by Betrivent ↑
^ Your location says new york, hence the confusion.
exactly lol this dude is crazy
cali yarisCanoga Park, CA · Feb 1, 2012#22
Look at that engine bay... that's Saudi dust if you ask me. Just a guess.

maybe he's FROM new york? 🤷
1.5Tampa · Feb 1, 2012#23
Originally Posted by cali yaris ↑
Look at that engine bay... that's Saudi dust if you ask me. Just a guess.

maybe he's FROM new york? 🤷
Its New York, Saudi Arabia
Bluevitz-rsOshawa, Ontario, Canada · Feb 1, 2012#24
Um, I'm pretty sure you're supposed to remove the factory intake pipe... The filter should be connected directly to the throttle body, not clamped to a rubber pipe.
syntaxRiyadh,KSA · Feb 2, 2012#25
@ jack yak, are you here in saudi arabia?
ilikericesavannah, ga · Feb 2, 2012#26
Originally Posted by Jack Yak ↑
it's middle east version dude ... in middle east the 1.5L engine only with 2010 , 2011 , 2012 ! before 2010 all yaris in middle east with 1.3L engine



A Code ! ! ! wat do you mean by get a code ? ?
A code is when your check engine light comes on. It will have a code set in the ecu. You can use a scanner to read what the code is. Either the scanner can erase the code, OR you can just disconnect the battery for a min and it will erase the code also. SOMETIMES people get a code when doing an aftermarket Intake. Like if you forgot to plug the connector back into the MAF sensor and turn the car on, like i did..
yaris 2szgreece · Feb 2, 2012#27
Originally Posted by ilikerice ↑
you dont have to disconnect the battery to clean it..
right. wash it.

Picture not included in this copy
malibuguyWestminster, MD · Feb 2, 2012#28
The piss por transitions create so much turbulence that the additional airflow from the cone filer is not being used.

Get a real intake
Jack YakThread starterInside My Yaris · Feb 2, 2012#29
Originally Posted by Betrivent ↑
^ Your location says new york, hence the confusion.
Originally Posted by 1.5 ↑
exactly lol this dude is crazy
Originally Posted by cali yaris ↑
Look at that engine bay... that's Saudi dust if you ask me. Just a guess.

maybe he's FROM new york? 🤷
Originally Posted by 1.5 ↑
Its New York, Saudi Arabia

Originally Posted by syntax ↑
@ jack yak, are you here in saudi arabia?
i'm not from usa neither saudi arabia i'm from Egypt

New York was wrong written while registration and i forget to edit it !

Originally Posted by Bluevitz-rs ↑
Um, I'm pretty sure you're supposed to remove the factory intake pipe... The filter should be connected directly to the throttle body, not clamped to a rubber pipe.
why ? dose the rubber pipe affect air flow ?

Originally Posted by ilikerice ↑
A code is when your check engine light comes on. It will have a code set in the ecu. You can use a scanner to read what the code is. Either the scanner can erase the code, OR you can just disconnect the battery for a min and it will erase the code also. SOMETIMES people get a code when doing an aftermarket Intake. Like if you forgot to plug the connector back into the MAF sensor and turn the car on, like i did..
yes i got it ,, but if i reconnected the buttery i don't need to get any codes right ?

Originally Posted by yaris 2sz ↑
right. wash it.

Picture not included in this copy
Originally Posted by malibuguy ↑
The piss por transitions create so much turbulence that the additional airflow from the cone filer is not being used.

Get a real intake
! ! are you really meaning that there are too much turbulence with the air flow ? ? ?

i saw alot of intake systems havning U and L shaped and worked good ? ?

---------

btw ... i cleaned the AFM and reconnected the buttery then i got a good improvemnt

that's my acceleration 0-100 before installing the filter

http://www.youtube.com/watch?v=vI_2G...layer_embedded

and that's after installing the filter and cleaning the AMF

http://www.youtube.com/watch?v=2GwFn...layer_embedded

1.2 sec difference ! Good improvement

last question ..

do i need to change filter place to get more cold air ? ?
malibuguyWestminster, MD · Feb 2, 2012#30
But they are smooth on the inside. While yours is cobbled together with no internal streamlining.
TickleTimeTimArkansas · Feb 3, 2012#31
Originally Posted by 1.5 ↑
Its New York, Saudi Arabia
hahah.

yeah, clean it up a good bit. if you really wanna enjoy the intake, just drive with your windows down and radio turned down. thats how i enjoy mine. sounds like an asthmatic kid fighting for his life. but if thats what the engine looks like due to location, i prob wouldn't roll my window down and let that crap get inside my car.
menzEgypt · Feb 5, 2012#32
hey jack hearing u r from egypt. I just installed HID kit but i do not like the glare do u know if there is anyone around can help me install projector lens to my headlights and do you have any experience with that.
charlieXXRiyadh Saudi Arabia · Feb 20, 2012#33
My location is saudi arabia, but I don't have such a thing.


Pic was taken during my eyelids blackening procedure last weekend.

1 attachment not included in this copy

cali yarisCanoga Park, CA · Feb 20, 2012#34
@ malibubuy

Check post 1, that's his car. Post 27 is someone else's.
Note the ribs right before the TB in post 1. I believe this is stock.

and by the way -- the OP's original question was answered in post 2.
BoyMalambingAl-Kharj, Saudi Arabia · May 13, 2012#35
will this be work in Toyota Echo 2005 1.3 engine....
JonathanHB2011Dubai,UAE · Jun 26, 2012#36
Hi! What is the part number of the K&N air filter you installed?
charlieXXRiyadh Saudi Arabia · Jul 3, 2012#38
I personally love mine and the responsiveness is quite noticeable specially when you floor it going from 60 to 120 to 140 I love the humming sound, if you haven't experienced the gain then you might not be driving it fast enough.