Yarisworld Archive

post for my project

37 posts · 19,559 views

AndikilzzOriginal postSINGAPORE · Jan 27, 2012#1
hi..
im a indonesian, would like to share about my project
here is my yaris project, but the project not yet complete...
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

with the spesicifation:
1. Veilside Andrew Baccarat 20 x 10,5 (rear) and 20 x 9,5 (front)
2. Cusco Coilover s compt on loweringkits
3. Cusco Lower Bar
4. C-one Custom Body kits
5. Cusco strutbar
6. cusco sway bar (front & rear)
7. HKS Hi-power muffler.
8. Autovision Day Runnig Light (2x)
9. autovision Bi-xenon Projector 2,5" on fog lamp
10. BREMBO big brake kit with 330 mm on front.
11. TYC tail light

below is mods after the wide project is finish:
1. AIRLIFT air suspension 4 point (get the stuff on february, and will instal on march, keep watches)
2. chameleon paint on wheels just on the lips, and silver carbon on center ring
3. carbon hood with the motorized.
4. baggage motorized


please give a comment about my project

here my first engine project:
Picture not included in this copy

and check it out for the 1st installation:

Picture not included in this copy

spec:
1. Zage's turbo kit bolt on yaris,
2. Greddy E manage
3. Nitorous Oxide System by NOS
4. Defi tachometer and gauge with defi link

8 attachments not included in this copy

Replies 36

ilikericesavannah, ga · Jan 27, 2012#2
I am sure its going to look amazing when complete.. My only "blah" about this is the front fenders look A LOT wider then the rear. BUT this could be the camera angle and it is still in the beginning stages.

Kudos on a custom wide body. will be subscribing to this one
AndikilzzThread starterSINGAPORE · Jan 27, 2012#3
i think so..
but i so confused to while the process of the wide body is complete....
because i saw in the front rims is wider than rear...
then a called for my technicians and tell about this wrong...
and he said in the front of the car was use a BREMBO big brake kit, and the rear is not used it....

whether this might happen?
eTiMaGoBangkok, Thailand · Jan 27, 2012#4
The Yaris is FWD so it would make sense for it to have bigger front wheels, but yes, it just looks strange.

At least I am happy to see that you have a turbo under there, not just another pretty but slow car :)
AndikilzzThread starterSINGAPORE · Jan 27, 2012#5
hahahaha....

i think the turbo is too small....
because i only used a zage turbo kit.... but someday i would like to changes with the bigger turbo...
03Z33SoCal · Jan 27, 2012#6
Very nice, loving the Veilside wheels!
33OHDover, Ohio · Jan 27, 2012#7
Looks amazing, love the wheels as well. I'm sure it'll turn out beautiful.
Jeff@MicroImageSFV, CA · Jan 27, 2012#8
So did you decide on a color yet?
mazillaSan Jacinto California · Jan 27, 2012#9
Lookin good!

Keep us updated, please.
Betriventedmonton · Jan 27, 2012#10
He's probably going silver since nothing else is sanded
TickleTimeTimArkansas · Jan 27, 2012#11
Well done. What seats are in it?
1.5Tampa · Jan 27, 2012#12
Final product is gonna look hella dope.
AndikilzzThread starterSINGAPORE · Jan 28, 2012#13
to:
jeff@MI: im confused about the color, can you give me a suggest?, but the rims will be repaint with chameleon color, but just 2 color inside....
mazilla: i will keep in updated but this project not yet completed, i will share the engine bay after the wide body is finish....
tickletimetim: is the OEM seater inside, but i will replace it with the bridge cuba seat, or recaro, which one do you choose?
AndikilzzThread starterSINGAPORE · Jan 28, 2012#14
hi,
thanks for appreciate...
im so tired to find this wheels on indonesia, and i thinks this wheel has been discontinued. so i find this wheels in second condition, but the stuff is in good condition..
Originally Posted by 33OH ↑
Looks amazing, love the wheels as well. I'm sure it'll turn out beautiful.
AndikilzzThread starterSINGAPORE · Feb 3, 2012#15
please give an idea to repaint my car...
33OHDover, Ohio · Feb 3, 2012#16
I love the green colour you guys have over there. It's not available over here in North America. Or a nice maroon.

Picture not included in this copy
Picture not included in this copy
AndikilzzThread starterSINGAPORE · Feb 3, 2012#17
Originally Posted by 33OH ↑
I love the green colour you guys have over there. It's not available over here in North America. Or a nice maroon.

Picture not included in this copy
Picture not included in this copy
i think you have a good idea....
but the green one is in wet look or not?
and may i put an airbrush overthere?
AndikilzzThread starterSINGAPORE · Feb 3, 2012#18
Originally Posted by Andikilzz ↑
hi..
im a indonesian, would like to share about my project
here is my yaris project, but the project not yet complete...
Attachment 45257

Attachment 45253

Attachment 45254

Attachment 45256

Attachment 45255

Attachment 45252

with the spesicifation:
1. Veilside Andrew Baccarat 20 x 10,5 (rear) and 20 x 9,5 (front)
2. Cusco Coilover s compt on loweringkits
3. Cusco Lower Bar
4. C-one Custom Body kits
5. Cusco strutbar
6. cusco sway bar (front & rear)
7. HKS Hi-power muffler.
8. Autovision Day Runnig Light (2x)
9. autovision Bi-xenon Projector 2,5" on fog lamp
10. BREMBO big brake kit with 330 mm on front.
11. TYC tail light

below is mods after the wide project is finish:
1. AIRLIFT air suspension 4 point (get the stuff on february, and will instal on march, keep watches)
2. chameleon paint on wheels just on the lips, and silver carbon on center ring
3. carbon hood with the motorized.
4. baggage motorized


please give a comment about my project
and here is the picture of my engine project but still not yet completed

Picture not included in this copy

1 attachment not included in this copy

33OHDover, Ohio · Feb 3, 2012#19
Originally Posted by Andikilzz ↑
i think you have a good idea....
but the green one is in wet look or not?
and may i put an airbrush overthere?
Yes the green is glossy. And not sure what you mean by an airbrush?
vtencolumbus · Feb 3, 2012#20
go with the aston martin green and paint that bacarrat to gold finish !!


itu turbo kit merk apa tah ?
AndikilzzThread starterSINGAPORE · Feb 3, 2012#21
Originally Posted by vten ↑
go with the aston martin green and paint that bacarrat to gold finish !!


itu turbo kit merk apa tah ?
i think the baccarat will be repainted with a green chameleon on lips and carbonized in centre cap..

Zage turbo kit...
AndikilzzThread starterSINGAPORE · Feb 4, 2012#22
Originally Posted by 33OH ↑
Yes the green is glossy. And not sure what you mean by an airbrush?
airbrush is another model of the stickers are made of paint

like this, check it out:
Picture not included in this copy

i thinks is a 🎉

1 attachment not included in this copy

AndikilzzThread starterSINGAPORE · Feb 10, 2012#23
Originally Posted by Andikilzz ↑
hi..
im a indonesian, would like to share about my project
here is my yaris project, but the project not yet complete...
Attachment 45257

Attachment 45253

Attachment 45254

Attachment 45256

Attachment 45255

Attachment 45252

with the spesicifation:
1. Veilside Andrew Baccarat 20 x 10,5 (rear) and 20 x 9,5 (front)
2. Cusco Coilover s compt on loweringkits
3. Cusco Lower Bar
4. C-one Custom Body kits
5. Cusco strutbar
6. cusco sway bar (front & rear)
7. HKS Hi-power muffler.
8. Autovision Day Runnig Light (2x)
9. autovision Bi-xenon Projector 2,5" on fog lamp
10. BREMBO big brake kit with 330 mm on front.
11. TYC tail light

below is mods after the wide project is finish:
1. AIRLIFT air suspension 4 point (get the stuff on february, and will instal on march, keep watches)
2. chameleon paint on wheels just on the lips, and silver carbon on center ring
3. carbon hood with the motorized.
4. baggage motorized


please give a comment about my project

here my first engine project:
Attachment 45365

and check it out for the 1st installation:

Attachment 45370

spec:
1. Zage's turbo kit bolt on yaris,
2. Greddy E manage
3. Nitorous Oxide System by NOS
4. Defi tachometer and gauge with defi link
need more comment to build up this car...
but I'm confused about it...
DerKaiZeRsPerth WA · Jun 23, 2012#24
hey.. how's ur project going bro?
AndikilzzThread starterSINGAPORE · Jun 29, 2012#25
Originally Posted by DerKaiZeRs ↑
hey.. how's ur project going bro?
my project still on progress
CoryMWhite Rock BC · Jun 29, 2012#26
You've probably figured it out by now, but it sure looks like the tires are on backwards ;)
Cheers.
AndikilzzThread starterSINGAPORE · Nov 3, 2012#27
an the project is still on progress....
and will update with the great evolution
1.5Tampa · Nov 3, 2012#28
wow are you still doing this it's taken forever, i thought you gave up
AndikilzzThread starterSINGAPORE · Nov 4, 2012#29
Originally Posted by 1.5 ↑
wow are you still doing this it's taken forever, i thought you gave up

yes the project is still running, and will be go with the new concept, with the higher HP than now i think...
AndikilzzThread starterSINGAPORE · Nov 6, 2012#30
turbo rebuilt on progress....
AndikilzzThread starterSINGAPORE · Nov 10, 2012#31
exterior will be complete

1 attachment not included in this copy

b20vtegmaricopa, az · Nov 10, 2012#32
dat lip
OTA'sTOYHilo, Hawaii · Nov 14, 2012#33
killer
but when did you have time to do the ragtop sunroof?
or is it just a illusion that looks like a ragtop?
AndikilzzThread starterSINGAPORE · Nov 25, 2012#34
Originally Posted by OTA'sTOY ↑
killer
but when did you have time to do the ragtop sunroof?
or is it just a illusion that looks like a ragtop?
thats a real ragtop not just illusion, when you are installed them u only a little bit space in door light interior
AndikilzzThread starterSINGAPORE · Jan 27, 2013#35
BUMPPPPPPPSSSSSSSS
A 2012 PROJECT HAS BEEN FINISHED

1 attachment not included in this copy

SilverSquash!South Africa · Jan 27, 2013#36
DAAAAAAAAAAAAAAAAAAAAAAAAMM!!
Picture not included in this copy
harda toenailSE Missouri · Jan 28, 2013#37
More pics please!