Yarisworld Archive

Problem in Yaris found

5 posts · 3,519 views

Dc1011Original postLouisville · Jan 21, 2012#1
Hey all.
So the dealer took a look at the car and figured out that one of the spark plugs was severely corroded and was causing a miss in cylinder 2
He said that because the car sat for almost a month after the wreck without being driven the spark plugs corroded over a little.
It's probably time for new ones anyway; 90,000 on the odometer.
Have many of you guys on here just changed the plugs yourself?

Replies 4

Betriventedmonton · Jan 21, 2012#2
They're pretty simply. All you need is a special deep socket to get the plugs out. if oyu try to do it yourself make sure you put some anti-seize compound on the threads of the plugs. ALSO MAKE SURE YOU DO NOT CROSS THREAD THEM. You do NOT want to have to get the head re-threaded.
bronsinnj · Jan 21, 2012#3
Originally Posted by Dc1011 ↑
Have many of you guys on here just changed the plugs yourself?

Since they need changing every 100k miles its probably a one in the cars life deal for most vehicles.

At the rate I am going it will be ten years before I need to change them!
mr_milesPortland, OR · Jan 22, 2012#4
I check them every time I change the oil :) When they look to dirty or have too much corrosion that cant be cleaned, i change em'

When i still drove my rx7 I would change the plugs once every few months. I had a couple sets and i would pull them, clean them, and reuse them.

..........but thats a dirty old rotary that would foul a plug for no reason so I had to clean em'. lol