Yarisworld Archive

I like symmetry...

36 posts · 14,283 views

CanIHazYarisHatch?Original postTexas · Jan 20, 2012#1
I am picking up a new '12 Yaris 3-door tomorrow, and would like some help replacing my hubcaps and steelies.

Here is what I would like, friends: I want a set of wheels that I can just bolt onto my Yaris with no hassles. No rubbing, no low-profile tire sizes, none of that. I want a set of alloys of the exact dimensions as the stock steelies, same offset, all of that. I don't want to deal with spacers or any other work other than ordering them, and bolting them on and driving the car for the next 10 years. I don't want fragile wheels that will fracture just commuting year-round (this car's primary use).

I like symmetrical wheels, four lugs, four spokes. Four lugs, eight spokes, aligned the same on all four "sides" as you view the wheel.

I am not a fan of very "loud" chrome wheels. But an anodized gold, grey, silver...looks fantastic to my eyes.

I like subtle beauty.

Here are some examples of what I like:

Borbet LV4

Stance Emotion Series

TSW Trackstar 4

I gratefully appreciate any and all help you can provide, my friends.

Replies 35

TOUGEghostKauai · Jan 20, 2012#2
If you want something with the same fitment as stock, that 15x8 stance wheel of unknown offset is not what you want. Out of the other two choices I like the borbet more; looks better, doesn't have a red stripe, and fits the symmetrical theme better with a single set of bolt holes rather than the dual pattern on the tsw wheel. Tirerack is a better choice as well.
CanIHazYarisHatch?Thread starterTexas · Jan 20, 2012#3
Originally Posted by TOUGEghost ↑
If you want something with the same fitment as stock, that 15x8 stance wheel of unknown offset is not what you want. Out of the other two choices I like the borbet more; looks better, doesn't have a red stripe, and fits the symmetrical theme better with a single set of bolt holes rather than the dual pattern on the tsw wheel. Tirerack is a better choice as well.
Hmmm...So those Borbets will just bolt right on? I don't need anything else?

Forgive all the questions, I know very little about wheel and tire measurements.
JumpmanYarisSO. INDIANA · Jan 20, 2012#4
Have you ever had a set of wheels?
4x100 is what you are gonna need
marlondogLost Angeles · Jan 20, 2012#5
Here's a wheel that will work: Acura LS mesh wheel. 15x6 45 offset

1 attachment not included in this copy

33OHDover, Ohio · Jan 20, 2012#6
Stance will rub.

TSW or Borbet will bolt right on, no rubbing, no other items required besides "tuner lugs" to fit in the smaller lug holes on the wheel. 12x1.5mm is what thread pitch you need of these. Can pick them up at your local auto parts store or eBay, or some wheel and tire sites will have them packaged as an "installation kit."

They may try to sell you hubcentric rings, may as well just get them. If they do not try to give you these, then there is no need for them as long as you tighten your lugs diagonally when installing.

For example...

1____4

3____2
yaris 2szgreece · Jan 20, 2012#7
inches? 15 or 16?

colour?
jpmck03USA · Jan 20, 2012#8
Originally Posted by CanIHazYarisHatch? ↑
I want a set of wheels that I can just bolt onto my Yaris with no hassles. No rubbing, no low-profile tire sizes, none of that. I want a set of alloys of the exact dimensions as the stock steelies, same offset, all of that. I don't want to deal with spacers or any other work other than ordering them, and bolting them on and driving the car for the next 10 years. I don't want fragile wheels that will fracture just commuting year-round (this car's primary use).

I like symmetrical wheels, four lugs, four spokes. Four lugs, eight spokes, aligned the same on all four "sides" as you view the wheel.

I am not a fan of very "loud" chrome wheels. But an anodized gold, grey, silver...looks fantastic to my eyes.

I like subtle beauty.

I gratefully appreciate any and all help you can provide, my friends.
First off, I know this isn't help per say, but man, I like the way you do business! 👍

Something to consider is finding some OEM alloys. I bought a set last year and they pretty much met all of your requirements (other than being symmetrical!). I like 'em! Stock size, no rubbing, simple, built to last, not flashy, etc...

Picture not included in this copy
CanIHazYarisHatch?Thread starterTexas · Jan 22, 2012#11
Originally Posted by marlondog ↑
Here's a wheel that will work: Acura LS mesh wheel. 15x6 45 offset
Those are gorgeous, but if I were using OEM wheels, I would want to keep it in the Toyoda family.

Originally Posted by 33OH ↑
Stance will rub.

TSW or Borbet will bolt right on, no rubbing, no other items required besides "tuner lugs" to fit in the smaller lug holes on the wheel. 12x1.5mm is what thread pitch you need of these. Can pick them up at your local auto parts store or eBay, or some wheel and tire sites will have them packaged as an "installation kit."

They may try to sell you hubcentric rings, may as well just get them. If they do not try to give you these, then there is no need for them as long as you tighten your lugs diagonally when installing.

For example...

1____4

3____2
Thank you! The Borbet's are in the running. That says a lot because I hate most aftermarket alloys. But those Borbets are sweeeeeeet.


Originally Posted by jpmck03 ↑
First off, I know this isn't help per say, but man, I like the way you do business! 👍

Something to consider is finding some OEM alloys. I bought a set last year and they pretty much met all of your requirements (other than being symmetrical!). I like 'em! Stock size, no rubbing, simple, built to last, not flashy, etc...

Picture not included in this copy
Thank you very much. I briefly considered these, but they are not truly symmetrical, so the love is now lost.


Originally Posted by cwitte ↑
Have you considered these?
http://shop.microimageonline.com/ALT...W156850411.htm

I just got some coming for my 2010 HB.

+ MI is awesome to work with and they are cheap enough to play with and not worry if you break them.
Those are indeed gorgeous, especially in the gun metal. However, I would want them with only four "branches", not five; they are not symmetrical. I like visual balance, and I know four spoke wheels are about as popular as STD tests in a whore house, but if I'm dropping $500+ on something...it has to be my way.

Or I'll just "survive" with the stock steelies and hubcaps.

Originally Posted by kimona ↑
Awesome link, thanks! So far, looks like the Borbets are the only set I can stomach.
Lil AbnerDublin, Ohio · Jan 22, 2012#12
Oh, these may not fit your "symmetric" criteria, but they are OEM alloys. I ordered them from a Toyota MR2, you just need to purchase the lug nuts for an MR2 or 2000+ Celica. Everything else is a perfect fit, including the hub ring. The offset is OEM, so with my DF210's and the ROUGH Michigan roads, there is NO rubbing!

Picture not included in this copy

Picture not included in this copy
thepartsmancomethmidwest · Jan 22, 2012#13
We have 17" OZ wheels for our summer set. They are 8 spoke, and look pretty good. Don't think I have any pics of the m on the car, but here's the link
jpmck03USA · Jan 22, 2012#14
After reading this thread, I realize that there aren't that many truly "symmetrical" wheels out there. thepartsmancometh's suggestion seems like the only ones that meet the bill so far...

Good luck with your search.
yPod09Santa Rosa, CA · Jan 22, 2012#15
Check out the Konig Feathers. Symmetrical, bolt right on, great price, lightweight, and you can choose from aluminum, black or bronze.
15x6.5 - Fit with my stock tires.

2 attachments not included in this copy

cali yarisCanoga Park, CA · Jan 22, 2012#16
http://www.discounttiredirect.com/di...wd=15&rw=&fcb=
Micro Image will always try and beat prices from the big stores. Support a site vendor!

I can point you at quite a few more symmetric wheels, those are not the only choices. (818) 610-3635.
VangCA · Jan 22, 2012#17
+1 for the konig feathers.. i have 16s on my sedan with no problem using 205/45/16 tires
CanIHazYarisHatch?Thread starterTexas · Jan 22, 2012#18
Originally Posted by yPod09 ↑
Check out the Konig Feathers. Symmetrical, bolt right on, great price, lightweight, and you can choose from aluminum, black or bronze.
15x6.5 - Fit with my stock tires.
Oh...those are very nice. I will look at the bronze and gunmetal ones.

Are they lighter than the stock steelies? Please say "yes"...Please say "yes"...Please say "yes"...
yPod09Santa Rosa, CA · Jan 22, 2012#20
Thanks Lil Abner for answering that one!
I was busy watching the Niners suck.

The bronze are great! I was all set on black, but hesitated when i saw the bronze, but glad I stuck with black. Tinted the windows yesterday, badges are back on and painted black (will post pictures once it stops raining for two minutes). They're great wheels, I love them.
CanIHazYarisHatch?Thread starterTexas · Jan 24, 2012#21
Originally Posted by Lil Abner ↑
Stock steelies are around 16lbs.
Konig Feathers (15x6.5) are 11.9lbs.
http://www.konigwheels.com/Konig-Hom.../FEATHER-BLACK
Awesome! Am actual improvement in unsprung weight--all while still using stock rubber, while still being affordable and symmetrical!

BRB...saving for a bronze set of Konig Feathers...

Originally Posted by yPod09 ↑
Thanks Lil Abner for answering that one!
I was busy watching the Niners suck.

The bronze are great! I was all set on black, but hesitated when i saw the bronze, but glad I stuck with black. Tinted the windows yesterday, badges are back on and painted black (will post pictures once it stops raining for two minutes). They're great wheels, I love them.
Can't wait. I love pictures.

Is there a way I can circumvent the TPMS without hacking up my wiring harness? Can I install the TPMS's on these Konigs?
Kaotic LazagnaCentral Valley, CA · Jan 24, 2012#22
So you want something like these?

Picture not included in this copy
kimonaHuntington Bch, CA · Jan 24, 2012#23
Originally Posted by CanIHazYarisHatch? ↑
BRB...saving for a bronze set of Konig Feathers...

Can I install the TPMS's on these Konigs?

Yes, TPMS will fit and is simple to change over.
CanIHazYarisHatch?Thread starterTexas · Jan 24, 2012#24
Originally Posted by Kaotic Lazagna ↑
So you want something like these?

Picture not included in this copy
Oh...my...Buddha...

Where have you been all my life?! Yes! Light-looking, symmetrical, simple, elegant, sporty...and in a bronzed finish too?!

Thank you a thousand times!

Please tell me these just bolt and and use the stock rubber?
CanIHazYarisHatch?Thread starterTexas · Jan 24, 2012#25
Originally Posted by upgradedyaris ↑
Enkei RPF1's, 15x7. Light weight (9.5 pounds), great fit and come in various colours.
But NOT symmetrical! Have you read this thread, my friend?

Originally Posted by Kaotic Lazagna ↑
So you want something like these?

Picture not included in this copy
Which "Axis" wheels are those?

Originally Posted by kimona ↑
Yes, TPMS will fit and is simple to change over.
Outstanding, Kimona! Thank you!
Kaotic LazagnaCentral Valley, CA · Jan 24, 2012#26
Originally Posted by CanIHazYarisHatch? ↑
Oh...my...Buddha...

Where have you been all my life?! Yes! Light-looking, symmetrical, simple, elegant, sporty...and in a bronzed finish too?!

Thank you a thousand times!

Please tell me these just bolt and and use the stock rubber?
Those are my friend's rims. I'm not sure which Axis rims those are, but after a little Google search, I think they're the Axis Maglite. I'm sure you can use the stock rubber on those (if your car came with 15's).
Kaotic LazagnaCentral Valley, CA · Jan 24, 2012#27
Here are a couple more pics of my friend's LB

Picture not included in this copy

Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Jan 24, 2012#28
Here's the problem, I can't find them new anywhere online now. I'm not sure if they are discontinued, but I'm sure if they are, Axis probably has a revised version of it for sale. lol
Kaotic LazagnaCentral Valley, CA · Jan 24, 2012#29
Scratch that, I don't see any 4-spoke wheels in their line up. Best bet is either CL or find another 4-spoke wheel. How about the Rota Auto-X (in 15x6.5, 4x100, +40 offset)

http://www.rotawheels.com/wheels.asp?wheelid=3
33OHDover, Ohio · Jan 24, 2012#31
Axis Maglites are discontinued but are pretty common to find used.

Also, Work Equip 01 or Work Equip 01 replica's are pretty similar.

If you ask Jeff @ Micro Image he can locate similar wheels for you and beat anyone else's advertised price.

Picture not included in this copy
33OHDover, Ohio · Jan 24, 2012#32
Also, Rota Auto X are similar too, but a split 4 spoke.

Picture not included in this copy

1 attachment not included in this copy

33OHDover, Ohio · Jan 24, 2012#33
Originally Posted by Kaotic Lazagna ↑
OOPS, my bad again, those Axis rims may also be the Racer X model.

http://www.wheelfire.com/scontent/Wh...r-xHS&SKU=2437
The Maglites don't have a lip, the Racer X has a little lip on it. That's the main difference between the two.
CanIHazYarisHatch?Thread starterTexas · Jan 24, 2012#34
A lot of good choices here.

A shame those Axis rims were discontinued, they were perfect for me. I won't risk used rims on my car, however.
33OHDover, Ohio · Jan 24, 2012#35
I'd recommend emailing a link to this thread to Jeff at Micro Image -- sales.microimage@gmail.com -- he knows his wheels and will help you find exactly what you are looking for. There may be a brand new version of a similar Axis-style wheel that he can get for you.

He was helping me look for wheels a little while back and was extremely helpful.
CanIHazYarisHatch?Thread starterTexas · Jan 24, 2012#36
Originally Posted by 33OH ↑
I'd recommend emailing a link to this thread to Jeff at Micro Image -- sales.microimage@gmail.com -- he knows his wheels and will help you find exactly what you are looking for. There may be a brand new version of a similar Axis-style wheel that he can get for you.

He was helping me look for wheels a little while back and was extremely helpful.
I will do just that, thanks!