monicaownsayarisOriginal postBlacksburg, VA · Jan 8, 2012#1A deer hit our Yaris the other day, but we hit its back end and managed to walk away with just some bumper cover cracks and random broken plastic along with a dent in the fender.
But the headlight housing came loose, and upon further inspection it cracked at all 3 bolt spots. The headlight is completely fine and works and all, but we can't re-attach it since each area on the plastic housing that gets bolted to the car cracked off.
So my question is, would I have to buy a whole new headlamp assembly or could i just replace the plastic casing that holds the headlamp with the bolt holes??? I really don't want to have to spend $60-80 just because some of the plastic ripped off.
Replies 9
monicaownsayarisThread starterBlacksburg, VA · Jan 8, 2012#2To clarify these are the areas that cracked off:
Picture lost · cias.rit.edu
So the black plastic has 3 areas that cracked off, but the actual headlight is ok
CTScottUSA, CT · Jan 8, 2012#3You can buy replacement tabs that attach to the headlight with screws from your local dealer (If you look where the tabs broke there are actually places for the screws to attach). They are about $10 each, but a replacement headlamp is typically way more than $30.
monicaownsayarisThread starterBlacksburg, VA · Jan 8, 2012#4Yea $30 for 3 tabs is MUCH better than $80 for the headlight assembly I found on ebay. And it'd be such a waste since the actual headlight aside from the tabs is completely ok.
However I took a look at it and I'm not sure where I'd screw the new tabs in. On 2 of the broken tabs, there are these 2 holes sticking out (the first picture) so that looks promising. But the third I can't guess as to where I'd screw it in (second picture). Maybe it'll make more sense when I buy the tabs or when I look again during daylight, but at least it's not obvious to me now.
Picture lost · cias.rit.edu
and
Picture lost · cias.rit.edu
Klink10910 · Jan 9, 2012#5Sorry about your misfortune and glad all are okay. I knew I bought those headlights off another member for a reason.
CTScottUSA, CT · Jan 9, 2012#6 Originally Posted by
monicaownsayaris ↑ Yea $30 for 3 tabs is MUCH better than $80 for the headlight assembly I found on ebay. And it'd be such a waste since the actual headlight aside from the tabs is completely ok.
However I took a look at it and I'm not sure where I'd screw the new tabs in. On 2 of the broken tabs, there are these 2 holes sticking out (the first picture) so that looks promising. But the third I can't guess as to where I'd screw it in (second picture). Maybe it'll make more sense when I buy the tabs or when I look again during daylight, but at least it's not obvious to me now.
Picture lost · cias.rit.edu
and
Picture lost · cias.rit.edu
There are only two repair tabs, so apparently Toyota doesn't consider the top one to be critical.
OTA'sTOYHilo, Hawaii · Jan 9, 2012#7CT
i think you mean the tab where the fender/bumper meet
CTScottUSA, CT · Jan 9, 2012#8 Originally Posted by
OTA'sTOY ↑ CT
i think you mean the tab where the fender/bumper meet
Correct - It's actually the bottom, not top one.
monicaownsayarisThread starterBlacksburg, VA · Jan 9, 2012#9Yes - it's the one by the fender that doesn't have those holes. So I guess I can repair 2 of the tabs then
CTScottUSA, CT · Jan 10, 2012#10 Originally Posted by
monicaownsayaris ↑ Yes - it's the one by the fender that doesn't have those holes. So I guess I can repair 2 of the tabs then
Correct.