TOUGEghostOriginal postKauai · Dec 21, 2011#1Took my Ti-C off to clean it and decided to make something fun with the stock exhaust pipe and a bunch of scraps I had lying around:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
It came out pretty decent, although I might try a different tip on it later. The surprising thing is that it is actually quieter than the Greddy at cruising speeds with less drone in the cabin. I figure this is because the Ti-C is tucked under the car and doesn't extend past the body. W.O.T. is of course a little louder.
*EDIT*
New revised version:
Picture not included in this copy
Picture not included in this copy
Replies 23
Kaotic LazagnaCentral Valley, CA · Dec 21, 2011#2Try a slant tip?
Or how about this tip? lol
Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Dec 21, 2011#3Back when my friend still had his Box.
Picture not included in this copy
TOUGEghostThread starterKauai · Dec 21, 2011#4Yeah, I couldn't find a slant tip. I think I should just slash cut the one I have.
KCALB SIRAYVirginia · Dec 21, 2011#5I dig it..
eTiMaGoBangkok, Thailand · Dec 21, 2011#6gets my seal of approval :D
mazillaSan Jacinto California · Dec 21, 2011#7Does that design trap condensation inside the pipe? I've always wondered if they would eventually fill with water...
TOUGEghostThread starterKauai · Dec 21, 2011#8Did a 45 degree cut on the tip; looks better. Added new pictures to the first post.
Picture not included in this copy Originally Posted by
mazilla ↑ Does that design trap condensation inside the pipe? I've always wondered if they would eventually fill with water...
The tip has a few holes on the bottom section where the screws to hold it on would go. Since I welded it on and didn't use these, the holes should serve as drains.
Kaotic LazagnaCentral Valley, CA · Dec 21, 2011#9There you go! I like that slant tip.
bzinn 1University Place,WA · Dec 29, 2011#10dude that is tight,I am so jealous,I want to do the same thing.I am afraid with header and midpipe and such it would be horrble loud though.
TOUGEghostThread starterKauai · Dec 29, 2011#11I do have a header but I still have stock cats and midpipe so that helps keep it from being too loud. I'm not sure how it would sound with no cat or resonator. Just make one with your stock pipe and try it out; at least it's quick and easy to change back if it's too loud.
Klink10910 · Dec 29, 2011#12Very clean looking.
EPyarisdriverEl Paso TX · Dec 29, 2011#13I really do like this ha
cali yarisCanoga Park, CA · Dec 29, 2011#14HOT. 👏
contraband831CEN*CAL · Dec 29, 2011#15Wow that looks great now i know what to do with my stock exhaust..lol!
matthewaiunited states · Dec 30, 2011#16what is that wrapping on the pipe ? just a heat thing im guessing ?
TOUGEghostThread starterKauai · Dec 30, 2011#17The pipe has about 8 welded joints on it to make the curve down under the bumper and back up, as well as step up the pipe size from stock to 2.5". I had lots of little scraps I cut up to make it. The blue is just masking tape.
Klink10910 · Dec 30, 2011#18Curious....did you strip and polish out the RPF1's? Then they might not be RPF1's, hard to tell from the angle. Anyway those look nice.
bzinn 1University Place,WA · Dec 30, 2011#19Yeah I gotta do this.....my buddy 2nd gen xB has it and it just looks sweet.
TOUGEghostThread starterKauai · Dec 31, 2011#20^^ Do it!
Originally Posted by
Klink10 ↑ Curious....did you strip and polish out the RPF1's? Then they might not be RPF1's, hard to tell from the angle. Anyway those look nice.
These are a different set of wheels (15" J-Speeds). I might be rocking the RPF1's in a few months when I need tires again. I actually "sold" them to a friend but never got paid. I had to repo the wheels and found a big curb rash on two of them, one of which also had a big dent. This makes it even harder than it already is to try and sell them. I'll need to order one or maybe two more new ones to be able to run them on my car again. It seems mostly cosmetic, but I can't handle rolling on some busted ass wheels that make it look like I'm some kind of idiot that doesn't know how to drive.
Klink10910 · Dec 31, 2011#21Cool. They do look good. That pipe reminds me of the days I sported a stinger pipe on my VW. Again, it looks very nice on yours.
A-Dingo-Ate-My-Babyearth · Dec 31, 2011#22heh
1 attachment not included in this copy
EPyarisdriverEl Paso TX · Dec 31, 2011#23 Originally Posted by
A-Dingo-Ate-My-Baby ↑ heh
LAWL 😆
TOUGEghostThread starterKauai · Dec 31, 2011#24Wow, haven't seen that one before. 😆