Yarisworld Archive

Torque wrench on lugs is critical on the Yaris

4 posts · 11,606 views

A-Dingo-Ate-My-BabyOriginal postearth · Dec 12, 2011#1
critical, because over-tight can induce warping as I found
---

I had slapped on my winter rims with 'pretty dang tight' and no torque wrench,
and all is fine and everything seemed OK.

a little bit when braking, I felt a thumping...Oh no....warped rotors...no way
did I overheat these things....I mean...really ????

anyhow, finally I dug out the digital torque wrench and retorqued all
my bolts to 76 foot pounds.

a) I found my human-gorilla torque was around 84/88/91/80 about average for all my lugs, but one front was 97 !!!!

b) after retorque to specs, Yaris is smooth as butter when braking

c) gorilla-tech method is always fine for my 4runner, but that thing has
much bigger rotors.

conclusion: you change tires on this little Yaris, torque wrench really is
a requirement. 'Just freaking tight' is going to be overkill on weeny rotors

Replies 3

RedRideMiddletown, NY · Dec 12, 2011#2
You have to be careful to tighen the nuts properly no matter if you use a torque wrench or not.
A-Dingo-Ate-My-BabyThread starterearth · Dec 12, 2011#3
well I did do it 'properly', but overtorqued one 'cuz I didn't have a
tool to measure, other than 'gumption

properly means use a torque wrench, so this statement doesn't make sense
Originally Posted by RedRide ↑
You have to be careful to tighen the nuts properly no matter if you use a torque wrench or not.
TOUGEghostKauai · Dec 13, 2011#4
"Properly" as in "tightening the lugs in the correct sequence." (Not saying you did it wrong, just pointing that out.)