Yarisworld Archive

Intakes

111 posts · 51,927 views · page 2 of 3

Replies continued

duke_afterdeathRiyadh, Saudi Arabia · Mar 24, 2012#51
Originally Posted by syntax ↑
heheheheh nakita mo naman ang resulta kahapon diba duke? nyahahahaha
uu nga tol, now clean n green nanaman si storm, hehehe.. plus new spark plugs at ok na ung brakes, smooth nanaman takbo ni storm 😁
syntaxRiyadh,KSA · Mar 24, 2012#52
Originally Posted by duke_afterdeath ↑
uu nga tol, now clean n green nanaman si storm, hehehe.. plus new spark plugs at ok na ung brakes, smooth nanaman takbo ni storm 😁
hehehehe, isang timba ata ng buhangin si storm, ung red na at black na engine bay, naging orange wehehehehe 🤣

ok na brakes pre? wala naman ako narinig nung tinetesting diba? 😁
OnadsKSA · Apr 9, 2012#53
Originally Posted by syntax ↑
tulad ngayon sandstorm na naman, if may time kayo mga kayaris, linisin na agad ang air filter dahil for sure kapal ng buhangin nyan.

Yan lang ang disadvantage ng open filter. 🙁 Why not try the drop in filter ng K&N paps? 👍 I think same performance with a stock look. kasi ma retain mo ung box ng filter mo (protection unwanted materials 😲) pero naka aftermarket filter ka.

Question lang: meron ba dito nag customize ng headers and pipings for Yaris?

thanks
syntaxRiyadh,KSA · Apr 9, 2012#54
Originally Posted by Onads ↑
Yan lang ang disadvantage ng open filter. 🙁 Why not try the drop in filter ng K&N paps? 👍 I think same performance with a stock look. kasi ma retain mo ung box ng filter mo (protection unwanted materials 😲) pero naka aftermarket filter ka.

Question lang: meron ba dito nag customize ng headers and pipings for Yaris?

thanks
ganun talaga ang may mga mods papi, there is always a price to pay.. kapag sa intake be ready to clean regularly. and galing ako sa K&N drop in filter, iba ang hatak ng SRI or CAI compared sa OEM box with drop in K&N drop in filter

sa question mo sa headers and pipings, wala nito sa riyadhor sa east, (dammam,khobar) naghahanap din kami nyan dati.
charlieXXThread starterRiyadh Saudi Arabia · Apr 9, 2012#55
Meron sa US ng headers approx 800U$

SRI and CAI ako will go back to stock, stock sucks pero nothing sucks like a cone filter.
OnadsKSA · Apr 10, 2012#56
Haha.. Yup Iba pa din talaga pag open filter ka. Maganda din kung modify yung headers and pipings. Basic modification Stage 1. Intake/Headers/Exhaust. Guarantee laki ng gains sa HP. Kita mo ang difference.

800$ Mahal headers palang yan.. Stainless naman kasi. Kung pede lang mag pa ship from Phil to KSA ng headers and pipings. hay... Sa atin kasi sa 7-10K PHP buo na ang stage 1 mo.
MarlboroRiyadh · Apr 11, 2012#57
Regarding stage 1 mods maglalaro lang cya sa 5 to 8 hp di masyado ramdam kung talagang gusto mo lumakas hp ng oto no choice but magpa turbo more or less nasa 60 to 70 percent ang itatataas ng hp ng car mo. Pero ok ang stage 1 pang porma :)
Kaotic LazagnaCentral Valley, CA · Apr 11, 2012#58
Just for clarification, the Yaris only has one header, so it's not headers.

Full bolt ons will get you about 10 hp at most without a tune. A tune is what will get you the most power out of your mods.
Kaotic LazagnaCentral Valley, CA · Apr 11, 2012#59
Probably the best performance mod would be very light weight rims and tires. I say this because everything improves, acceleration, braking, cornering, and gas mileage.
Kaotic LazagnaCentral Valley, CA · Apr 11, 2012#60
My Tagalog reading skills is horrible (can only understand it when I'm spoken to), but a drop in K&N filter will not give you any performance increase. It's still in the same restrictive intake box with the same carbon trap filter. It's usually only good for being a one time purchase filter that can be reused.

As for water, as long as you don't drive through a flooded area, you should be good. You can also get a hydroshield to prevent any drops of water from being sucked in (won't protect you if you try to drive through a flooded road). Mine works great. I don't bother to "bag" my filter when I wash my car.

Picture not included in this copy

Picture not included in this copy
ricepowerSaudi Arabia · Apr 11, 2012#61
in addition to above..

The header for 1.3L 2nz-fe yaris is not compatible with the one from US. US header are for 1.5L 1nz-fe in majority.

Unless, you have the yaris 1.5L sporty edition here in ksa, then its a bolt-on.

I don't know why in these country, they used to sell small displacement engines cars eventhough the gas is cheaper than water 😠
charlieXXThread starterRiyadh Saudi Arabia · Apr 11, 2012#62
@Kaotic can you share the website where you got the hydroshield K&N
mikedizzlesan antonio · Apr 12, 2012#64
what kind of intake you have?
Kaotic LazagnaCentral Valley, CA · Apr 12, 2012#65
Originally Posted by mikedizzle ↑
what kind of intake you have?
Me? I have the K&N SRI (Typhoon). I just wrapped it with some heat reflective material since the pipe is black and made of aluminum (which gets heat soaked easily).

Picture not included in this copy

Picture not included in this copy





The pipe wrapped:
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Apr 12, 2012#66
Yes, I did notice a difference if how hot it feels. Before the wrap, touching the pipe was sometimes unbearable. I can now keep my hand on the pipe after I wrapped it.

performance-wise? Not really sure since I've always had HEAVY rims. lol
barebonedvitzsacramento,CA · Apr 12, 2012#67
i got mine from http://www.outerwearsracing.com/ They're all pretty much the same thing.. just branded differently.. got mine from 10yrs ago for my civic and still works great!
barebonedvitzsacramento,CA · Apr 12, 2012#68
what's great about these guys is that they can make custom wraps!

I believe this will be beneficial for our radiators, evaporators and for some, intercoolers... so those poor bugs don't get stuck in between the fins and die a horrid death...
syntaxRiyadh,KSA · Apr 18, 2012#69
@ kaotic thanks for the clarifications, im sure we take notes on this one
ricepowerSaudi Arabia · Apr 24, 2012#70
YES. It's bolt-on or plug n play to our 1.3L.

PM kiel12 for the experiences.

Picture not included in this copy

Originally Posted by atvtorres ↑
Tanong lang po kung pwede to sa yaris 1.3L(2nzfe)? Thanks!

http://www.ebay.com/itm/290400046694...#ht_5655wt_905
levanz2007Philippines · May 5, 2012#71
Originally Posted by ricepower ↑
YES. It's bolt-on or plug n play to our 1.3L.

PM kiel12 for the experiences.

Picture not included in this copy
your mod is cool dude!!!
BoyMalambingAl-Kharj, Saudi Arabia · May 8, 2012#72
PWede ba ito sa Toyota Echo 2005 1.3 engine....
syntaxRiyadh,KSA · May 16, 2012#73
Originally Posted by BoyMalambing ↑
PWede ba ito sa Toyota Echo 2005 1.3 engine....
pwede ang alin pre? dami mods ni kiel eh hehehhhe
BoyMalambingAl-Kharj, Saudi Arabia · May 20, 2012#74
yung Air intake kit na naka-install.... Kapareho pala ng Echo and Toyota XA sa lay-out ng Air Filter.
syntaxRiyadh,KSA · May 20, 2012#75
Originally Posted by BoyMalambing ↑
yung Air intake kit na naka-install.... Kapareho pala ng Echo and Toyota XA sa lay-out ng Air Filter.
yup magkapareho lang ang layout
syntaxRiyadh,KSA · May 20, 2012#76
@ boymalambing galing cardomain pre' tingnan mo ang layout ng weapon r intake sa echo

2 attachments not included in this copy

BoyMalambingAl-Kharj, Saudi Arabia · May 20, 2012#77
@ Syntax.. oo nakita ko ito pero ang makina nya is 1.5L ok lang kaya ito...
syntaxRiyadh,KSA · May 20, 2012#78
Originally Posted by BoyMalambing ↑
@ Syntax.. oo nakita ko ito pero ang makina nya is 1.5L ok lang kaya ito...
i think pareho lang, ang titingnan kasi natin ay placement at kung ano pa ang nakakabit sa OEM na air intake
BoyMalambingAl-Kharj, Saudi Arabia · May 20, 2012#79
ah ok... meron ba sa riyadh nito???
syntaxRiyadh,KSA · May 20, 2012#80
Originally Posted by BoyMalambing ↑
ah ok... meron ba sa riyadh nito???
not exactly pre' bale ang gagawin natin dito ay gagayahin ang layout ng tubo then sa dulo ay cone type air filter, bale DIY ito pre,
BoyMalambingAl-Kharj, Saudi Arabia · May 20, 2012#81
ah ok magpapacustomize ng tubo. Mukhang kailangan ko ng contractors ko para makapagpalay-out ako ng tubo. tamang tama.... hehehehe
syntaxRiyadh,KSA · May 20, 2012#82
Originally Posted by BoyMalambing ↑
ah ok magpapacustomize ng tubo. Mukhang kailangan ko ng contractors ko para makapagpalay-out ako ng tubo. tamang tama.... hehehehe
👍

kailangan lang ay ung layout at mga butas na kailangan at dimensions ng aluminum tube 👍

meron din nabibili na pwede na, konting DIY na lang
BoyMalambingAl-Kharj, Saudi Arabia · May 20, 2012#83
ah ok baka may makita ka pag naggala ka pakipost at san lugar para makita ko...
BoyMalambingAl-Kharj, Saudi Arabia · May 20, 2012#84
pwede ko kayang tanggalin yung Box na lang tapos palitan ko ng Air Filter na Cone.... para wala na pipe customization.
syntaxRiyadh,KSA · May 20, 2012#85
Originally Posted by BoyMalambing ↑
pwede ko kayang tanggalin yung Box na lang tapos palitan ko ng Air Filter na Cone.... para wala na pipe customization.
masyado mainit na hangin ang mahihigop nun pre' mas lalo ka mawawalan ng HP.
BoyMalambingAl-Kharj, Saudi Arabia · May 20, 2012#86
Ah ganun ba.. Nakakita ako kailangan doon sa may fender malapit sa likod ng headlight ilagay kaso yung pipe icucustomize pa
syntaxRiyadh,KSA · May 21, 2012#87
Originally Posted by BoyMalambing ↑
Ah ganun ba.. Nakakita ako kailangan doon sa may fender malapit sa likod ng headlight ilagay kaso yung pipe icucustomize pa
yup ganun nga ang mangyayari, pwede rin ung may rubber coupler ang pipe para mailiko ang pipes.. 👍
BoyMalambingAl-Kharj, Saudi Arabia · May 21, 2012#88
Originally Posted by syntax ↑
yup ganun nga ang mangyayari, pwede rin ung may rubber coupler ang pipe para mailiko ang pipes.. 👍
May nakita ko post dito na ginamitan ng PVC T pipe 32mm para sa MAF Sensor
si ka armando ata nagpost. ask ko nga baka makunan nya ng malapit para magaya ko sa Echo ko.

1 attachment not included in this copy

syntaxRiyadh,KSA · May 21, 2012#89
hindi na active si armando aka pilyo sa YWME pre' halos lahat ng mga kayaris ay ganito ang setup including mine... kapag may time ka attend ka ng monthly meet natin, every 1st friday un, para makita mo meron din naka CAI sa mga kayaris...
BoyMalambingAl-Kharj, Saudi Arabia · May 21, 2012#90
Ano po specs (size) ng Air Filter na to... may brand po ba definite??
BoyMalambingAl-Kharj, Saudi Arabia · May 21, 2012#91
@ Syntax, baka pwede mo naman ipakita yung sa iyo. ano size nung air filter, ano kailangan ko bilhin at saan ka bumili ng airfilter mo. TY
syntaxRiyadh,KSA · May 21, 2012#92
Originally Posted by BoyMalambing ↑
@ Syntax, baka pwede mo naman ipakita yung sa iyo. ano size nung air filter, ano kailangan ko bilhin at saan ka bumili ng airfilter mo. TY
hirap i describe eh, yung specs nakalimutan ko na rin, attend ka na lang ng monthly meet 😁 dami makikita 👍
BoyMalambingAl-Kharj, Saudi Arabia · May 21, 2012#93
Photos will help... medyo malayo lang po kasi kaya di ako makababa....
syntaxRiyadh,KSA · May 21, 2012#94
cge try ko hanapin ang specs nun, sa pictures pareho lang nung nasa ibang kayaris, mag iiba yung sayo dahil echo yan..
BoyMalambingAl-Kharj, Saudi Arabia · May 21, 2012#95
Originally Posted by syntax ↑
cge try ko hanapin ang specs nun, sa pictures pareho lang nung nasa ibang kayaris, mag iiba yung sayo dahil echo yan..
Thanks in advance sa specs at sa photo. Yung photo baka pwede yung medyo malapit from engine up to filter kasama yung mga joints, pano kinabit yung MAF sensor at yung isang pipe from Engine na maliit.
BoyMalambingAl-Kharj, Saudi Arabia · May 22, 2012#96
Originally Posted by syntax ↑
cge try ko hanapin ang specs nun, sa pictures pareho lang nung nasa ibang kayaris, mag iiba yung sayo dahil echo yan..
@ Syntax, nakita ko na yung para sa Toyota Xa 2004 Scion na pwede gamitin sa Echo 2005. Same layout as you said. Papagawa na lang ako sa contractor namin ng Stainless steel pipe. Papagaya ko ito

http://www.trdparts4u.com/scripts/pr...dproduct=-7862

http://www.carid.com/2004-scion-xa-a...ke-360128.html
syntaxRiyadh,KSA · May 22, 2012#97
ayus yan pre' para sakin wag steel pre' kung pwede ang aluminum mas maganda
BoyMalambingAl-Kharj, Saudi Arabia · May 23, 2012#98
Ay oo nga pla Aluminum... plan ko sana para mag ok, yung Rubber Tubing na misma nakakabit sa Intake tanggalin ko lang box tapos gamit ng mga clip(yun ba tawag doon)
syntaxRiyadh,KSA · May 23, 2012#99
yup.. ganun nga pre' basta kung ano ung nakakabit dapat sa OEM na intake meron din sa custom intake na gagawin mo...
duke_afterdeathRiyadh, Saudi Arabia · May 23, 2012#100
Originally Posted by syntax ↑
yup.. ganun nga pre' basta kung ano ung nakakabit dapat sa OEM na intake meron din sa custom intake na gagawin mo...
+100 hehehe, musta tol...