whoknows89Original postIndiana · Nov 7, 2011#1Has anybody put their tweeters in this area?
Picture not included in this copy
Replies 11
whoknows89Thread starterIndiana · Nov 7, 2011#2I was planning on putting the tweeters in the pillars like a bunch of people on this site have done, but I don't have the tools to put a hole in the pillar. I also talked to a guy that works at a custom audio shop near my school and he said that that area would make them sound hollow, but I don't know how much he knows cause that spot seems to work well for other people.
cali yarisCanoga Park, CA · Nov 7, 2011#3My tweeters work great. Some sibilance loss with the windows open, but overall very good quality sound.
Picture not included in this copy
whoknows89Thread starterIndiana · Nov 7, 2011#4Yeah I was thinking about mounting them like that, ill have to try it out.
CrankyOldManWest Michigan · Jul 7, 2012#5 Originally Posted by
cali yaris ↑ My tweeters work great. Some sibilance loss with the windows open, but overall very good quality sound.
Picture not included in this copy
Thread necro!
Hey Garm, does the panel where you mounted the tweeter come off? I can't find it on the parts diagrams or in the repair manual...
cali yarisCanoga Park, CA · Jul 7, 2012#6Yes, there are three grey pieces they all pull off.
CrankyOldManWest Michigan · Jul 7, 2012#7Oh good. I didn't want to spend half an hour prying on them only to find they're glued/screwed/sonic'd together. I also found a pic of the door panels you were selling a while back that had the front 2 parts removed. Did you just bore a hole with a holesaw to install yours?
derickveliz2Central, MA · Jul 8, 2012#8Try different aiming positions, if you are not running active x-overs some times it's better to keep the tweeters within 12 inches from the center of the main speaker (midbass).
This keeps the separation of female and male vocals.
D.
PatrickJohnsonMurfreesboro, TN · Jul 9, 2012#9 Originally Posted by
cali yaris ↑ My tweeters work great. Some sibilance loss with the windows open, but overall very good quality sound.
Picture not included in this copy
what model tweets are those?
AltitudeColorado · Jul 9, 2012#10 Originally Posted by
CrankyOldMan ↑ Oh good. I didn't want to spend half an hour prying on them only to find they're glued/screwed/sonic'd together. I also found a pic of the door panels you were selling a while back that had the front 2 parts removed. Did you just bore a hole with a holesaw to install yours?
It's best to remove the door panel, leave the upper cover on and bore through it. There's not just a clear space underneath.
cali yarisCanoga Park, CA · Jul 9, 2012#11@ patrickjohnson -- all JBL components, those are about 5 years old now, don't recall the exact model. 🙂
sqcompBack at home · Jul 9, 2012#12Picture not included in this copy
^You mean like that?
I'm thinking your guys is saying that the way you're mounting the tweeters might make it sound like the backwave would be sent through the tube. Now...let's take bets on whether your speaker is sealed or not! Take a pic of the back of the tweeter for us.
To add to what Derick is saying about speaker location...IF you don't have phasing control or true time alignment. Cause changing the time alignment has a direct correlation with your phase. It's an interesting experiment, setting T/A on one set of speakers at a time.