Yarisworld Archive

cracked manifold

26 posts · 7,632 views

cali yarisOriginal postCanoga Park, CA · Sep 26, 2011#1
I guess if you throw 350 hp at it long enough, something is going to break. 🙁

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 25

ParmasML · Sep 26, 2011#2
Ehhh I feel sorry for you \Garm..... I hope this will not happen to me !

Funny thing I am not seeing carbon all around the manifold... are you sure it is cracked?
cali yarisThread starterCanoga Park, CA · Sep 26, 2011#3
The manifold was Jet-Hotted, that explains its overall color.

The carbon is exhaust gas coming out through the cracks. Trust me, it's got cracks in it!
fnkngrvIn The Hotbox · Sep 26, 2011#4
Damn that sucks, but like you said...you use it and it will eventually give way...just the nature of the beast. At least it wasn't something like an output shaft or losing a gear.
justjesusOrange County · Sep 26, 2011#5
worse than I imagined!
cali yarisThread starterCanoga Park, CA · Sep 27, 2011#6
^ thanks for the advice today, Jesus. 🙇
yarisugiハワイ · Sep 27, 2011#7
On the bright side, at least it wasn't the block or the head!
Is that cast? The cracked areas looks like it can be welded again... Unless you plan on replacing it altogether.
cali yarisThread starterCanoga Park, CA · Sep 27, 2011#8
Going to replace it. Art doesn't want to weld on Jet Hot (or any other coating), which I learned yesterday is wise advice.
A-Dingo-Ate-My-Babyearth · Sep 27, 2011#9
haven't you seen 1fast 2furious ?

1 attachment not included in this copy

cali yarisThread starterCanoga Park, CA · Sep 27, 2011#10
^ LOL, that movie actually did get me into tuner cars in the first place. And every time I hook up my laptop to data log, it reminds me of that.
YodaFL · Sep 28, 2011#11
Hmm looks like you were not putting out enough power. If you were running 400whp then it would not break. Due to the turbo encabulator rotation of the prefixed particle molecule, it built up enough fail to break the manifold.
ilikericesavannah, ga · Sep 28, 2011#12
😆
cali yarisThread starterCanoga Park, CA · Sep 28, 2011#13
hehe
fnkngrvIn The Hotbox · Sep 28, 2011#14
I bet if you would have used an upgraded Hemway during the process you would have been file. In this case since it is already broken you should upgrade to a better flux capacitor while you have it off.
sickpuppy1Kansas · Sep 28, 2011#15
umm I think its actually called a Henway, just to keep the record straight
Bluevitz-rsOshawa, Ontario, Canada · Sep 28, 2011#16
Could it be a lack of bracing and the weight of the turbo? I know the stock manifold has bracing to the block.
cali yarisThread starterCanoga Park, CA · Sep 29, 2011#17
^ could be; maybe we can fabricate some support for it.
SilverBackEl Monte, Ca · Sep 29, 2011#18
Have Art build a custom manilfold to take-on that much boost. He obviously know his shit.
haschelEastern township Qc · Sep 29, 2011#19
Time for equal lenght manifold Garm 🤘
MUSKOKA800Chatham, Ontario, Canada · Sep 29, 2011#20
In the meantime, why not grind it clean and braze it.
A-Dingo-Ate-My-Babyearth · Sep 29, 2011#21
need to have someone build you a titanium manifold and put the issue to rest once and for all.

by 'someone' I mean an expert in Metallurgy, and welding Ti.
justjesusOrange County · Sep 30, 2011#22
Originally Posted by cali yaris ↑
^ thanks for the advice today, Jesus.
You got it buddy!

I'm glad I didn't go with my original advice, "use duct tape"
EPyarisdriverEl Paso TX · Sep 30, 2011#23
Originally Posted by justjesus ↑
You got it buddy!

I'm glad I didn't go with my original advice, "use duct tape"
Duct tape- a musicians best friend 👍
LtNoogieWest Hills, CA · Oct 2, 2011#24
What were the symptoms? Loss of boost? CEL? Loud noise from the engine bay?
cali yarisThread starterCanoga Park, CA · Oct 2, 2011#25
The cracks are pretty small. Art discovered the cracks when he pulled the trans to do the final drive swap. Not sure I would have seen them back there until they get a lot worse.
cali yarisThread starterCanoga Park, CA · Oct 6, 2011#26
In the meantime, why not grind it clean and braze it.
It was Jet Hotted, so the coating makes it more difficult to do repairs. We decided to just replace the whole thing, easier and I have one here on the shelf. 👍