Iggy888Original postEtobicoke, ON Canada · Sep 25, 2011#1Thought I'd post some pictures now that I finally have the new to me spolier installed.
Here is how it looked when I picked it up from echo_hrs:
Picture not included in this copy
Toyota Part Number: PZ321-52065 for those who might be interested.
Picture not included in this copy
And some shots of it painted and installed:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Thank you again echo_hrs! That spoiler really ties the room together :)
Replies 40
Betriventedmonton · Sep 25, 2011#2Lookin' good ;D
WeeYariGeorgetown, Ontario, Canada · Sep 25, 2011#3👍
Soooo many peeps will be jealous *cough marcus, cough* 😉
TwisterboyEdinburgh, Scotland, UK · Sep 25, 2011#4🎉🎉
That looks fantastic.
Davy
EPyarisdriverEl Paso TX · Sep 25, 2011#5Awesome!!!! where did you get it from?
TickleTimeTimArkansas · Sep 25, 2011#6very nice. clean look
EPyarisdriverEl Paso TX · Sep 25, 2011#7wait nevermind...
Still awesome!
ROCKLAND TOYOTAROCKLAND COUNTY NY · Sep 26, 2011#8NADM??? wouldn't that be CANADIAN DOMESTIC MARKET.....
CrandallNo Funswick · Sep 26, 2011#9 Originally Posted by
ROCKLAND TOYOTA ↑ NADM??? wouldn't that be CANADIAN DOMESTIC MARKET.....
Last time I checked, Canada is still in North America. 🤷
Betriventedmonton · Sep 26, 2011#10 Originally Posted by
ROCKLAND TOYOTA ↑ NADM??? wouldn't that be CANADIAN DOMESTIC MARKET.....
Fail.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Sep 26, 2011#11 Originally Posted by
Crandall ↑ Last time I checked, Canada is still in North America. 🤷
nice of you to check BUT its still CDM....👍
YaristeveLos Angeles · Sep 26, 2011#12First time I've seen close ups of that part. It is more a wing than a spoiler; does it direct wind/air down the rear window and keep it clean(er)? If so, I may have to get one...
Betriventedmonton · Sep 26, 2011#13if anything it would deflect air up and away from the back window and provide some sort of awning to keep leaves and twigs from falling on the window
Iggy888Thread starterEtobicoke, ON Canada · Sep 26, 2011#14I am not sure how the air flow at the back has changed but I thought the hatch window seemed a little easier to see out of during the last heavy rain.
I found myself needing to use the rear wiper a little less than normal.
I guess I will have a better idea in then next few more months after I have gone through some rain and some snow.
beebosaurFullerton · Sep 26, 2011#15i really like the look of this. where can i get one? =]
YaristeveLos Angeles · Sep 26, 2011#16 Originally Posted by
Betrivent ↑ if anything it would deflect air up and away from the back window and provide some sort of awning to keep leaves and twigs from falling on the window
Agreed, however, it looks like the leading edge of the wing is higher than the top of the rear door and the bottom surface is shaped to direct wind/air downward. In the only other pictures I've seen, the wing looked like it was flush with the door top and mounted right against it more like a spoiler. I realize this would cause drag/lift but since these kinds of wings are mostly for looks, I thought/hoped it might be designed to at least clean the rear window...
Betriventedmonton · Sep 26, 2011#17If I recall the leading edge is actually flush with the body..
YaristeveLos Angeles · Sep 26, 2011#18 Originally Posted by
Betrivent ↑ If I recall the leading edge is actually flush with the body..
That's what I thought until I saw these two pictures:
Originally Posted by
Iggy888 ↑ Picture not included in this copy
Picture not included in this copy
Oh, BTW to the OP, looks good!
Ouch! Over $700 from the dealer, $550 from discounters...
ArmyYarisFort Campbell, KY · Sep 27, 2011#19At first i was skeptical that'd this wing would just be to ricey and ridiculous judging by the first picture...
But it grew on me, I LIKEY!!! = )
CrankyOldManWest Michigan · Sep 27, 2011#20 Originally Posted by
Yaristeve ↑ Ouch! Over $700 from the dealer, $550 from discounters...
Not sure where you're getting that price, but this place has them colormatched for $336 CAD:
James toyota. And to boot, the USD is on par with the CAD, so it comes out to about the same price.
YaristeveLos Angeles · Sep 27, 2011#21 Originally Posted by
CrankyOldMan ↑ Not sure where you're getting that price, but this place has them colormatched for $336 CAD:
James toyota. And to boot, the USD is on par with the CAD, so it comes out to about the same price.
Did a quick and dirt Google on the part number:
http://www.toyotapartszone.com/oem/t...-52065-B2.html StoveTigard Oregon · Sep 27, 2011#22I really like that one, nice install.
Originally Posted by
Yaristeve ↑
I think I'd rather go with CrankyOldMan's posted source:
Picture not included in this copy1 attachment not included in this copy
QmobileHoytville, ohio · Oct 16, 2011#23I WANT THAT SPOILER!!!!!!! I wonder if the holes will line up with the "almost a spoiler" spoiler that I have now
marcustoronto, canada · Oct 16, 2011#24 Originally Posted by
WeeYari ↑ 👍
Soooo many peeps will be jealous *cough marcus, cough* 😉
lol.... im actually happy with what i got unless that thing cost $120 bucks.. 😆
incase people wondering there is a difference between oem and replica, oem tilt up towards the end where replica is almost flush on the roof..oem got gap in the middle between roof and spoiler vs replica 0 gap.
first shot was mine and 2nd was iggy's..
2 attachments not included in this copy
jmew0ngArizona · Jan 16, 2012#25Sorry to revive an old thread... I got the same spoiler as a gift for christmas..... except it didn't have the covers for the screws XD
Do you happen to have the part number just for the cover :3
TRDMartyCorona CA · Jan 16, 2012#26 Originally Posted by
Stove ↑ I really like that one, nice install.
I think I'd rather go with CrankyOldMan's posted source:
Attachment 43898
Anyone happen to know the PART # for this Rally Spoiler????? 🤷
WeeYariGeorgetown, Ontario, Canada · Jan 16, 2012#27^ post #1
TRDMartyCorona CA · Jan 16, 2012#28 Originally Posted by
WeeYari ↑ ^ post #1
Thanks WeeYari
However, the part # PZ321-52065 is not a valad part #.
I've tried 3 Toyota parts websites with no success.
One Toyota link showed part # PZ321-52065-B2.
Same results, no workie 🙁
Has anyone actually purchased the Rear Rally Spoiler?? 🤷
If so, would you happen to have the part #????
ilikericesavannah, ga · Jan 16, 2012#29WeeYariGeorgetown, Ontario, Canada · Jan 16, 2012#30 Originally Posted by
ilikerice ↑
Substantially different spoiler than the 2010 featured in this thread. TRDsparks has the pre-'09 rally style spoiler.
KioshiFremont, CA · Jan 16, 2012#31the 06-08 rs spoilers sat flush (usdm+jdm) like most of the replica rs spoilers people have. 2009-2011 has that gap and tilt.
Looks good finish on your car OP.
ilikericesavannah, ga · Jan 17, 2012#32 Originally Posted by
WeeYari ↑ Substantially different spoiler than the 2010 featured in this thread. TRDsparks has the pre-'09 rally style spoiler.
sorry, I got Stove and OldCrankyMan's post mixed up...
my bads
TRDMartyCorona CA · Jan 17, 2012#33 Originally Posted by
ilikerice ↑
Found it!! Thanks
TRDMartyCorona CA · Jan 17, 2012#34I'm reading here that there are possibly up to 3 different rear spoilers for the Hatchback??
1) The SHORT or stubby one like I have. (2008 HB)
2) The Rally Spoiler (shown in Toyota website pic ABOVE)
3) And the Large Spoiler for PART # 00016-52700 on TRD Sparks website.
Or are #'s 2 & 3 the same??
When converting from a short (stubby one) to a Large spoiler, does ANY of my exsisting
holes get used for the Large Spoiler.
If not, will any of my exsisting holes actually show once the Large spoiler is installed??
ilikericesavannah, ga · Jan 17, 2012#35I doubt the holes will be usable. my spoiler holes lay out further then the stubby one.
I dont know where your holes are layed out on your spoiler. if there are more then 2 locations across the hatch, probably not then.
TRDMartyCorona CA · Jan 18, 2012#36 Originally Posted by
TRDMarty ↑ I'm reading here that there are possibly up to 3 different rear spoilers for the Hatchback??
1) The SHORT or stubby one like I have. (2008 HB)
2) The Rally Spoiler (shown in Toyota website pic ABOVE)
3) And the Large Spoiler for PART # 00016-52700 on TRD Sparks website.
Or are #'s 2 & 3 the same??
When converting from a short (stubby one) to a Large spoiler, does ANY of my exsisting
holes get used for the Large Spoiler.
If not, will any of my exsisting holes actually show once the Large spoiler is installed??
Huummm, I wonder if Garm might know about #'s 1,2,3 above?? Garm?????
Iggy888Thread starterEtobicoke, ON Canada · Jan 23, 2012#37 Originally Posted by
TRDMarty ↑ I'm reading here that there are possibly up to 3 different rear spoilers for the Hatchback??
1) The SHORT or stubby one like I have. (2008 HB)
2) The Rally Spoiler (shown in Toyota website pic ABOVE)
3) And the Large Spoiler for PART # 00016-52700 on TRD Sparks website.
Or are #'s 2 & 3 the same??
When converting from a short (stubby one) to a Large spoiler, does ANY of my exsisting
holes get used for the Large Spoiler.
If not, will any of my exsisting holes actually show once the Large spoiler is installed??
As WeeYari mentioned earlier, there appear to be three different types of rear spoilers for the hatchback. 2 & 3 listed above are in fact the same spoiler. The short/stubby one is the first type, the large/rally one is the second type. The third type is like the one I got from echo_hrs from his 2010 RS (Canadian Domestic Market).
I don't recall ever seeing that third type of spoiler on sale as an accessory from Toyota. I have only ever seen similar replicas available for the third type.
With regards to re-using the holes, sorry, I can not help you there as I went from no spoiler and no holes to newly drilled holes for this spoiler.
OTA'sTOYHilo, Hawaii · Jan 23, 2012#381. stubby toyota OE accessory spoiler 06-11 part# 08150-52870-**
2. toyota OE RS/S model large spoiler part# PZ321-52067
3. pedestal style rally spoiler part#? in post# 22
4. spoiler style like on Marcus's yaris post# 24
--(i bought mine like Marcus's one off of EBAY for $80 from Hong Kong)
TRDMartyCorona CA · Jan 24, 2012#39 Originally Posted by
Iggy888 ↑ As WeeYari mentioned earlier, there appear to be three different types of rear spoilers for the hatchback. 2 & 3 listed above are in fact the same spoiler. The short/stubby one is the first type, the large/rally one is the second type. The third type is like the one I got from echo_hrs from his 2010 RS (Canadian Domestic Market).
I don't recall ever seeing that third type of spoiler on sale as an accessory from Toyota. I have only ever seen similar replicas available for the third type.
With regards to re-using the holes, sorry, I can not help you there as I went from no spoiler and no holes to newly drilled holes for this spoiler.
Thanks Iggy888
WOW, I'm still confused on this 🤷
One may be called a Rally Spoiler
One may be called a Large Spoiler
One has no gap, flush to the body
One has a gap to the body
One kicks up from the body
One lies flush to the body
WTF???Lets try this again
In post #22 shows what I'm interested in. Though the angle is from
down looking up. (anyone notice there is NO rear wiper in the pic)
Unfortunately #22 does not actually show its part #
#22's pic appears to lye flush from the body rather than ''kick-up''
What is this rear spoilers name & whats the part#
Any genuwine Toyota parts guys out there that can confirm?????
Iggy888Thread starterEtobicoke, ON Canada · Jan 26, 2012#40Hello TRDMarty, I believe the spoiler you like from #22 is the Large Spoiler (aka Rally Spolier), part number 00016-52700
I found an earlier
post by
Ran Kizama which specified the part numbers specific to the various colours:
Part Numbers: 00016-52700-10 - HB Spoiler 068 Polar White
00016-52700-02 - HB Spoiler 209 Black Sand Pearl
00016-52700-03 - HB Spoiler 3P0 Absolutely Red
00016-52700-08 - HB Spoiler 8T0 Blazing Blue Metallic
00016-52700-18 - HB Spoiler 8T1 Bayou Blue
To better visualize the Large/Rally spoiler from different angles, here are a some pictures
ToyToronto, another YW member posted in various threads:
BEFORE: Picture not included in this copy Picture not included in this copy Picture not included in this copy AFTER: Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy Toy: I hope you don't mind me borrowing your pictures. I just thought they were so well done, you made me want to add a spoiler to my hatchback 🙇
TRDMartyCorona CA · Jan 27, 2012#41 Originally Posted by
Iggy888 ↑ Hello TRDMarty, I believe the spoiler you like from #22 is the Large Spoiler (aka Rally Spolier), part number 00016-52700
I found an earlier
post by
Ran Kizama which specified the part numbers specific to the various colours:
Part Numbers: 00016-52700-10 - HB Spoiler 068 Polar White
00016-52700-02 - HB Spoiler 209 Black Sand Pearl
00016-52700-03 - HB Spoiler 3P0 Absolutely Red
00016-52700-08 - HB Spoiler 8T0 Blazing Blue Metallic
00016-52700-18 - HB Spoiler 8T1 Bayou Blue
To better visualize the Large/Rally spoiler from different angles, here are a some pictures
ToyToronto, another YW member posted in various threads:
BEFORE: Picture not included in this copy Picture not included in this copy Picture not included in this copy AFTER: Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy Toy: I hope you don't mind me borrowing your pictures. I just thought they were so well done, you made me want to add a spoiler to my hatchback 🙇
Thanks IGGY, you are very helpful 🎉