Yarisworld Archive

Permanent Roof Rack

7 posts · 7,399 views

Connoisseur_of_fine_carsOriginal postTexas · Sep 23, 2011#1
Is the Yaris LB 3-door roof strong enough for a permanent roof rack? I mean the type you have to drill holes, like Yakima. I want to attach a basket for a 5-gallon jerry can and some luggage. And I just hate the dirty look of clip-ons.

Like this Yakima on a Honda Fit
Picture not included in this copy

Picture not included in this copy

Replies 6

CTScottUSA, CT · Sep 23, 2011#2
Definitely. Under the black strips on the roof is a double layer of sheet metal.
Connoisseur_of_fine_carsThread starterTexas · Sep 27, 2011#5
Originally Posted by WeeYari ↑
Looks like the bolts have to go thru the thin sheet metal. I wonder if the setup is stronger enough to handle a mountain bike. During high speed Interstate travel, I reckon there is tremendous amount of drag force on the bike and rack.
DebbyM46227Indianapolis · Sep 27, 2011#6
I wouldn't ruin any car by doing that.
CTScottUSA, CT · Sep 27, 2011#7
Originally Posted by Connoisseur_of_fine_cars ↑
Looks like the bolts have to go thru the thin sheet metal. I wonder if the setup is stronger enough to handle a mountain bike. During high speed Interstate travel, I reckon there is tremendous amount of drag force on the bike and rack.
Where the one in the thread is mounted is definitely just to the single layer of the roof. It is actually quite a bit stronger than you'd think, and the rail-type roof racks actually stiffen the sheet metal quite a bit.

I did some hydraulic ram body work on Crashy recently. (I was trying to get the passenger side of the car from the A pillar to the C pillar back up to where it started, so I can mount a plexi windshield for plowing this year.) I was amazed as to how much force was required to get the large dents (>10" diameter by >3" deep) to pop back up.