Yarisworld Archive

2010 White 3dr / A Pillars / kicks / sound deadening / new false floor / etc...

31 posts · 35,753 views

3cyltrboOriginal postOttawa · Sep 16, 2011#1
***DUPLICATE FROM ANOTHER FORUM - but I think only 3 other members here are on that forum*****

This is my first install in over 10 years.

I'll warn you that if the results are amateur(ish) its because I did the whole thing on the ground outside my garage, or on some days I worked from my front porch.

What I'm trying to say, is…………the whole thing was done in my spare time, (whenever I could steal away 30mins or an hour to myself)

If I'd had proper tools and a week off from work, I could have done the whole thing in short time, but as it was I had to spread it over 4 months of odd weeknights and at times maybe a couple hrs on a weekend.

The goals were:

-create a good sounding system with emphasis on sound quality (I've never had a car louder than 140db and frankly I don't really care for much over 110 these days)
-highlight some equipment that I'm fond of (Xtant specifically)
-mix of old school design (carpeted false floors etc.) with more contemporary install methods / while also having a tiny bit of flash but not so much that people being in the car for the first time would know that there was a system installed. (I didn't want anything that slapped you in the face)
-complement the overall theme of the vehicle (I enter a lot of Import shows on the east coast - having a decent system isn't mandatory in the ImportScene but it certainly helps)
-I also wanted to keep it as functional as possible (full access to spare tire / full use of hatch area / zero compromise of passenger comfort upfront) (the new false floor is only 0.75" taller than OEM)

Brief Info on the car

I bought it new off the lot this April, and within a week I had installed the coilovers and wheels. Since then I've done the rear wing, JDM badging, lightweight pulleys (crank/alternator/waterpump), as well as a cold air intake and some minor cosmetic stuff. This winter I'm going to install a full exhaust including high flow catalytic converter / bracing / anti-roll bars and tons more MicroImage stuff and if I get more adventuresome I'll do a lightweight flywheel and bolt on supercharger.

The first step was figuring out the front stage / placement / size / drivers used etc…..

After lots of reading at Parts Express, I decided to try their Dayton ND105 4" Midbass and the Vifa Vifa BC25SC06-04 silk dome tweeter. The Mids claim to have 4mm of Xmax / a 53hz resonant frequency and they cost me about $26 each (at the time I bought them) . The Vifa tweeter had some really really good reviews, I read a lot of good stuff about it on various message boards and frankly it only cost $11 each, so how could I go wrong?

Then for Sub duties I decided to try two of the TangBand 6.5 Neo subs, and I built a box for one ported that I put in the hatch and one sealed that I had under the dash (behind the glovebox)

This first iteration sounded fantastic and I had it tuned really well, I loved what the TB 6.5's could do.

BUT!!!!,,,,,,,,,,,,,,,,,, I saw one of the SWR 843's at a carshow in May and I was intriqued, then I came back here to DIYMA and started reading about them so I decided to build a new install in the hatch around a ported SWR 843. After I put everything back in, I never got to re-tune it, somehow I frigged with the crossover settings in the amp and the passive crossovers and I haven't managed to get it right since then - so that’s a project for the winter (after I change the kickpanels)

Here is the equipment list

Clarion NX501 DVD / Nav headunit
Xtant 3150 3channel amp
Alpine SWR 843 sub (ported)
Dayton Audio ND105 4" midbass
Vifa BC 25 tweets
Alpine Type X passive crossovers


First I found a paper-mache jewellery box at Michaels that would perfectly fit the Vifa tweeter. I recessed it into the factory A-pillar and glassed it in (don't need to explain the whole process of wrapping / filling in from behind - smoothing out the front etc…). Then instead of painting the pillar black and using 1 layer of grill cloth, I decided instead to use two layers of grill cloth. The first layer to serve as a black base and also to give more texture and a slightly softer feel.

Next I cut the end off an ABS plumbing cap that was almost the exact size of the Midbass / I cut holes in the factory kicks (personally I always integrate the factory kick into my design) / I hotglued the ABS baffle to the factory kick / wrapped / filled etc. For the kickpanels I decided to wrap them in NEFFY carbon fibre vinyl, and also matched the door sill covers in the same stuff and also use the NEFFY as highlights in the hatch area (more on that later)

Next came the hatch area (the last part I did) basically I removed the factory floor and storage compartments and re-created them in 1/2 inch mdf (with lots of metal bracing) . The right side features a .53 cu-ft box housing the SWR 843D. The chimney style port for the box is 100% outside the box, and it basically passes underneath the passive crossovers. The centre of the false floor features a door which provides access to the spare tire beneath. In the door is a recessed compartment with the passive crossovers. To the left of the door is another recessed area with power distribution / ground distribution a volt meter and a current meter.

The Amp and the active EQ (not running until I can get TRUE RTA set-up) are housed in the back of the rear seat. Each one is in its own rack that was recessed into the seat. For this I cut the backs of the seats out, the amp rack is recessed about 2 inches into the seat and the EQ rack is recessed about 1.25 inches into its side of the rear seat.


The whole floor of the car (unibody) was covered in deadening material (from the firewall to the back of the hatch) and in some areas I'm trying out a thin convoluted foam mattress pad, underneath the OEM carpet.

I ran KnuKoncepts 4 AWG through a grommet I put in the firewall.

Basically every inch of wire was techflex'd and all the wires were tied to each other where appropriate and taped to the floor under the carpeted areas.


On to the pics

The day I picked up the car

Picture not included in this copy

Coilovers installed shortly after

Picture not included in this copy

Wheels installed after that

Picture not included in this copy


Install pics:

Factory A Pillars

Picture not included in this copy

Picture not included in this copy

The Factory A Pillars are held in with a safety clip to prevent them from hitting you in the face when the side airbags deploy

Picture not included in this copy

Here is the clip

Picture not included in this copy

A pillar removed

Picture not included in this copy


Behind each kickpanel was a big distribution block that got moved

Here is the drivers side

Picture not included in this copy

Picture not included in this copy

Here is the passengers side

Picture not included in this copy


Here is the passengers side with the hole for the baffle and the wiring block out of the way

Picture not included in this copy


PaperMache jewellery boxes perfect for tweets

Picture not included in this copy

Picture not included in this copy


Midbass Baffles out of ABS endcaps

Picture not included in this copy

Picture not included in this copy


A-Pillars prepped for tweeter pod

Picture not included in this copy


Tweeter Pod inserted into A-Pillar

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy


Tested in the Car

Picture not included in this copy


A Pillar wrapped

Picture not included in this copy

Glassed and test fitted in car

Picture not included in this copy


Tested in car with kickpanels as well

Picture not included in this copy

Picture not included in this copy


Test fitting Midbass into kickpanel

Picture not included in this copy


Baffle attached to kickpanel

Picture not included in this copy

Kickpanel glassed

Picture not included in this copy

Picture not included in this copy


Testing for space behind the glovebox. Two cardboard boxes fit behind glovebox (stacked on top of each other) in this picture just one cardboard box is shown

Picture not included in this copy




Refining the Kickpanels

Picture not included in this copy


Refining the A Pillars

Picture not included in this copy



A bunch of steps weren't photographed but the end result was a-pillars wrapped in two layers of black grill cloth and kickpanels wrapped in one layer of Neffy carbon fibre vinyl (the door sills were wrapped to match the kicks)

Picture not included in this copy


Drivers side A Pillar

Picture not included in this copy


Passenger side A Pillar

Picture not included in this copy

From the outside

Picture not included in this copy

Picture not included in this copy

One part that I was particularily proud of was working with a company that does Rapid ProtoTyping and 3D printing to create grills for the tweeter and midbass that match each other.
I look at a bunch of designs from both home audio and car audio and sent my ideas to the company who turned around with these really cool grills.

Final Design of the Tweeter Grill

Picture not included in this copy

Picture not included in this copy

Here is the grill for the tweeter

Picture not included in this copy

Picture not included in this copy


Final Design for the Midbass Grill

Picture not included in this copy

Picture not included in this copy

The grill for the midbass (exact copy of the tweeter grill - however sized to the midbass)

Picture not included in this copy

Picture not included in this copy


The two grills together

Picture not included in this copy


Next I sprayed them with 4 layers of fillable primer before painting 5 coats of gloss black and 5 coats of clearcoat (don't have all the pics)

Picture not included in this copy


Completed Front end including Pillars / custom grills / kicks / headunit

Picture not included in this copy

Picture not included in this copy


Next came the bulk of the wiring / the deadening and the rear install and recessed amp and EQ racks (in the back seats)

Some of my Xtant Collection waiting to go - I used a brand new 3150 for this install, and a used P500 EQ

Picture not included in this copy


Basically everything came out of the car in stages / first the rear seats / then fronts / then carpet etc….

Picture not included in this copy


Deadening and start of wiring

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy


TechFlexing everything

Picture not included in this copy


Firewall grommet above and to the left of ECU

Picture not included in this copy

ECU dropped for easier access

Picture not included in this copy


Underhood 4 AWG techflexed / then that was inserted into flex loom / then the loom was wrapped in electrical tape and wiretied to OEM underhood wires (the wire ties were swapped to black after these pics)

Picture not included in this copy

Picture not included in this copy


4 AWG pulled through firewall (not run yet)

Picture not included in this copy


Most wiring done and most of the deadening complete

Picture not included in this copy

Picture not included in this copy



Back of the rear seat being excavated to make room for recessed amp rack and EQ rack

Picture not included in this copy

Picture not included in this copy


Starting the Amp Rack and the EQ rack

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

I used these bolts recessed into the Amp rack and EQ rack so that no fasteners would be visible

Picture not included in this copy

Picture not included in this copy

Then a whole bunch of pictures are missing - which documented, completing the amp rack and EQ rack / making the floor and the recessed compartments and then wrapping the recessed compartments and first layer of floor in Neffy carbon fibre vinyl.

Here are some pics of the pretty much finished product.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

With the covers and the sub grill installed (for some reason the camera makes the carpet on the removable covers look a different color and it exagerates the seams. Trust me when I say that it’s the exact same roll of carpet and the seams in person are very flat)

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Here are a couple pics of the outside of the car (with the wing and a little more drop than before)

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Future audio plans include:

-new midbass drivers upfront (TangBand underhung 6.5's / or Denmark made Alpine hemp fibre Type X 6.5)
-finish remaking the sealed box to accommodate a second Alpine SWR 8" that will go under the dash)
-try out the TangBand 3.5" bamboos in the A-pillars (already have them and some passive crossovers for them)
-finally install the Optima battery I have sitting at home
-finally do the big 3 under the hood

Thanks for looking

Cheers

Will

Replies 30

3cyltrboThread starterOttawa · Sep 16, 2011#2
completed pics together

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
henryleeUnited States · Sep 16, 2011#3
Nice setup...
mazillaSan Jacinto California · Sep 16, 2011#4
Pretty sweet DIY work, especially when you take into consideration the workspace/tools you had available.

I like it.
3cyltrboThread starterOttawa · Sep 16, 2011#5
Originally Posted by MickZEL ↑
You're just cool

Umm thanks ?


Originally Posted by henrylee ↑
Nice setup...
Thank you


Originally Posted by mazilla ↑
Pretty sweet DIY work, especially when you take into consideration the workspace/tools you had available.

I like it.

Thank you, using hand tools on my front porch as a work space kinda sucks - but I guess its better than nothing.

I'd love to have proper equipment to work with, but I don't have the space or the money to fully equip a workshop setup.

Cheers

Will
mazillaSan Jacinto California · Sep 16, 2011#6
Originally Posted by 3cyltrbo ↑
Thank you, using hand tools on my front porch as a work space kinda sucks - but I guess its better than nothing.

I'd love to have proper equipment to work with, but I don't have the space or the money to fully equip a workshop setup.

Cheers

Will

I hear ya, my wife used to loath it when I used our dining room table as my workbench before I bought our current house. We didn't have a lot of space(or worldly possessions) back then so I just took over the dining room (with built in cabinets). If you opened a cabinet tools would come pouring out...haha, the good old days.

Now I "need" a bigger garage, I swear it never ends.

Anywho, great work you did there. 👍
RevssonSoutheast Wisconsin · Sep 16, 2011#7
Nice clean work!
I'm envious of your abilities to fabricate things. 🙇
I've thought about running some wires up through the A pillars, but am too
chicken to work with special clips and airbags. 🙁
Klink10910 · Sep 16, 2011#8
Wow. I am impressed. What coilovers are those?
israPR · Sep 16, 2011#9
really nice and clean setup!!!!!!!
3cyltrboThread starterOttawa · Sep 16, 2011#10
Originally Posted by TOLMACH ↑
3cyltrbo: Awesome work!

Stupid question: where can one buy this blue fabric you used to wrap the pillars?

Thanks
its swimsuit material from a craft store.

I love to use it because it has tons of stretch in every direction (not like some material that has alot of stretch in one direction and none in another direction)

It also takes resin pretty well, as a matter of fact - alot of times like the A pillars, I don't even bother putting fibreglass over it because I don't need the strength

W
3cyltrboThread starterOttawa · Sep 16, 2011#11
Originally Posted by Klink10 ↑
Wow. I am impressed. What coilovers are those?
STD suspension "Standard Suspension"

Originally Posted by Revsson ↑
Nice clean work!
I'm envious of your abilities to fabricate things. 🙇
I've thought about running some wires up through the A pillars, but am too
chicken to work with special clips and airbags. 🙁
the special clips are pretty easy to rotate out of the way

Originally Posted by isra ↑
really nice and clean setup!!!!!!!
thank you

Will
jpmck03USA · Sep 16, 2011#12
Originally Posted by 3cyltrbo ↑
This is my first install in over 10 years.

I'll warn you that if the results are amateur(ish) its because I did the whole thing on the ground outside my garage, or on some days I worked from my front porch.
I'm not an audiophile by any means, and am a self-proclaimed car-modding noob; but there is nothing amateurish about that at all.

Amazing job, man! 👍
Lil AbnerDublin, Ohio · Sep 16, 2011#13
Nice job man!
vtencolumbus · Sep 16, 2011#14
i want those pillars... can you make me one please 😁

nice and clean install 👍👍
YaribusaChattanooga, TN · Sep 17, 2011#15
Great job! 🎉
3cyltrboThread starterOttawa · Sep 17, 2011#16
Originally Posted by Lil Abner ↑
Nice job man!

Originally Posted by jpmck03 ↑
I'm not an audiophile by any means, and am a self-proclaimed car-modding noob; but there is nothing amateurish about that at all.

Amazing job, man! 👍


Originally Posted by Yaribusa ↑
Great job! 🎉
thanks

W
3cyltrboThread starterOttawa · Sep 17, 2011#17
Originally Posted by MickZEL ↑
Hence, this material contains lycra.
How many layers of material you put and how to apply the resin?
sometimes its just one layer as a mold an then I put layers of fibreglass over it

in the case of the A Pillars it was one layer of swimsuit material and a whole bunch of bondo / and body filler to smooth out some areas and fill it in a little bit

when I apply resin, I mix the resin and the hardener in a paint tray and I apply it with a paint brush and cure it in direct sunlight
sqcompBack at home · Sep 17, 2011#18
Love me some Pre-Mitek Xtant.

What is the source you're using and how's your imaging, soundstage, and depth?

Also...you CAN relocate those wiring bundles in the kicks up into the dash area for more room...
3cyltrboThread starterOttawa · Sep 17, 2011#19
Originally Posted by sqcomp ↑
Love me some Pre-Mitek Xtant.

What is the source you're using and how's your imaging, soundstage, and depth?

Also...you CAN relocate those wiring bundles in the kicks up into the dash area for more room...
I'm using Clarion's NX 501 -all in one headunit.

Not known for its SQ - but its a good all arounder with decent NAV.

I did relocate the wiring blocks all the way up under the dash (about 14 inches away from where they were originally)

Personally I think it ends up sounding pretty damn good considering how narrow the cabin is. The stage is high and up front - the depth is pretty good (although not always at the end of the hood like some cars I've built)

At its first IASCA show (my first show in over 10 years) it got second in class SQ - (1st place was a much bigger vehicle with similar setup)

once I build 6.5"s up front / add the second sub (sealed up front) and tune it, its going to sound amazing (I think)

I'm kinda thinking Dayton RS28F's in the A-pillars (padded down a bit and off axis ) - ALONG with the TangBand Bamboo 3.5" (Also in the pillars - almost on axis) - and maybe even the Peerless SDS 6.5 in the kicks (rather than the TangBand underhung or the Type X).

W
sqcompBack at home · Sep 18, 2011#20
Well...with that said, we should have you show up at Keith McCumber's shop in Coquitlam BC next year to make a Yaris statement! You in Amateur or a Pro/Am class?

You may not need it, but on the pillars, that little white Molex plug is the antenna. That plug can be removed IIRC and the wire can be soldered. Space savings.
sqcompBack at home · Sep 18, 2011#21
The coquitlam event(s) will be in the spring and summer of next year. The season is pretty much done for this year.

I'll keep you guys in the know in this section.
jpmck03USA · Sep 18, 2011#22
Originally Posted by TOLMACH ↑
Thanks, W.. I will make a tour around the craft stores to find this swimsuit fabric

I did my A pillars recently and could not find any suitable material in stores like Canadian tire or Home Depot around. Had to use some ugly female pants that I bought at a nearby shopping mall (those were on sale for 1.99 a pair).. However, shopping for ugly femal pants in the women apparel boutique is not a pleasent experience 🙂
😆 Ha, those are some Sexy Modern Edgy Generation pants you got there!
marcustoronto, canada · Sep 19, 2011#23
wow
derickveliz2Central, MA · Sep 21, 2011#24
Very nice install! but please don't call your install "amateur(ish)" looks like work from Pros!

Looks really good!

D.
3cyltrboThread starterOttawa · Sep 21, 2011#25
Originally Posted by derickveliz2 ↑
Very nice install! but please don't call your install "amateur(ish)" looks like work from Pros!

Looks really good!

D.
Thank you

There was a bunch of stuff that I felt I could have done better

The next iteration will have nicer kick panels and maybe two-way a-pillars

Will
DailyDriverutah · Mar 18, 2013#26
Awesome. Thanks for posting!
sqcompBack at home · Mar 19, 2013#27
Love the Pre-Mitek Xtants!
KillchainAlbuquerque · Mar 19, 2013#28
Outstanding!!!!!!!!!!!!!!!!👍

If only I had the skill and patience to do the work you completed.
DeadliestfleaSep 11, 2014#29
super clean install! love the mid bass! i need to step up my setup now!
sqcompBack at home · Dec 4, 2014#30
Love the pre-Mitek Xtant amps.

I recognize those passives.

Next time you do pillars, look at angles and placement on the tweeters. I say that having used those tweeter locations before off active EQ'ing. I just looked at you pillar and doors again...The sedan is a bit different. A sail panel location would widen the stage a bit, but, no sail panels in the hatch unfortunately.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
^ Old pillar setup that helped place highest points in class for IASCA in 2011.

Derick and I have a lot of tuning track recommendations if and when you need. We both are good people to lean on with placement and tuning questions.
pennyracergrants pass · Aug 21, 2015#31
mine are almost done Picture not included in this copy

Picture not included in this copy