Yarisworld Archive

coilover help asap!

13 posts · 3,545 views

CAyarisOriginal postGoodyear · Sep 5, 2011#1
Hey can anyone that has coilovers, and knows how to do the installation on them please message me or call me asap; i need help with my install 623 203 9146

Thank you!

Replies 12

Kaotic LazagnaCentral Valley, CA · Sep 5, 2011#2
Shouldn't it be the same/identical to regular spring installs aside from the rear spring perch?
cali yarisCanoga Park, CA · Sep 5, 2011#3
Are any directions posted anywhere?
CAyarisThread starterGoodyear · Sep 5, 2011#4
no instructions.

and the anti sway bar link is not able to attach because of the brake line
cali yarisCanoga Park, CA · Sep 5, 2011#5
It's drivable without the end links attached, so don't stress over that too much.

Where's the install pics so we can help?
CAyarisThread starterGoodyear · Sep 5, 2011#6
the endlink wont go from top to bottom and when it does the car cant turn with out snagging the brake line

Picture not included in this copy
yarisugiハワイ · Sep 5, 2011#7
I assume your car is on stands when you took that photo.
Mount your wheel back on the car, tighten the lug nuts enough so your wheel doesn't fall off. Lower your car with a jack on the frame so the tire rests on the ground. You can raise or lower the jack to get the endlink into that hole.
CAyarisThread starterGoodyear · Sep 5, 2011#8
No thats not the issue i just took the picture with it out, i can get it in but when i turn the wheel the brake line jams into the endlink
BrianRiverside, CA · Sep 5, 2011#9
Did you unbolt the brake line and try re-routing it? You can also try some stainless lines which might give you a little more length to keep it out of the way.
CAyarisThread starterGoodyear · Sep 5, 2011#10
yeah i had to unbolt it to move it to the coilover.
CAyarisThread starterGoodyear · Sep 5, 2011#11
Anyone...? Really nt sure why its doing this? i have it in but it hits the line. And i cant drive like that....
Flipper_1938Kentucky · Sep 5, 2011#12
Originally Posted by CAyaris ↑
the endlink wont go from top to bottom and when it does the car cant turn with out snagging the brake line

Picture not included in this copy
stock: (from a thread on here)

Picture not included in this copy

The mounting hole apears to be about the same distance from the tube. ....but, the end link looks more straight up and down in your picture. Is it the stock sway bar?
CAyarisThread starterGoodyear · Sep 5, 2011#13
yes stock sway bar.