Yarisworld Archive

Sound Deadening - most effective?

6 posts · 6,504 views

josh044Original postillinois · Aug 24, 2011#1
What is the best bang for the buck as far as bringing the in-cabin sound level down. I guess I'd also consider best bang for time involved. I rather not remove the entire interior.

From my own ears it seems like a lot of noise comes from the wheel wells. Is coating the wheel wells (on the outside) the best bet?

Also, a lot of people seems to cover the wheel well with metal tape stuff. Is that area a prime culprit?

Replies 5

mazillaSan Jacinto California · Aug 24, 2011#2
Originally Posted by josh044 ↑
What is the best bang for the buck as far as bringing the in-cabin sound level down. I guess I'd also consider best bang for time involved. I rather not remove the entire interior.

From my own ears it seems like a lot of noise comes from the wheel wells. Is coating the wheel wells (on the outside) the best bet?

Also, a lot of people seems to cover the wheel well with metal tape stuff. Is that area a prime culprit?

In that case, I'd suggest ear plugs. 😁
josh044Thread starterillinois · Aug 25, 2011#3
Originally Posted by mazilla ↑
In that case, I'd suggest ear plugs. 😁
Really? You think any incremental steps would be a waste of time? It seems like coating the wheel wells with a layer of truck bed rubber coating might put a good dent in the noise.
mazillaSan Jacinto California · Aug 25, 2011#4
Originally Posted by josh044 ↑
Really? You think any incremental steps would be a waste of time? It seems like coating the wheel wells with a layer of truck bed rubber coating might put a good dent in the noise.

I used the spray and aluminum tape method and noticed a difference, but I had to tear down the interior. Given the amount of reduction I got from that I can't imagine you having much luck only hitting the underside of the fender liners. There are a few threads around that go into great detail on the subject...
BLOODY_STONEAlexandria , Egypt · Sep 4, 2011#6
I sprayed an undercoat rubber spray and it increased insulation by about 40% ..... Not bad ... Still didnt insulate the doors