Yarisworld Archive

Simota SRI rubs driver side headlight

15 posts · 8,506 views

RogueYarisOriginal postJAX · Aug 24, 2011#1
My Simota SRI is such a tight fit that the cone is packed against the driver's side headlight.

I'm wondering if anyone else had this issue and what they did to alleviate it.

Yes, I tried the search function but I couldn't find anything relevant.

Replies 14

RogueYarisThread starterJAX · Aug 25, 2011#2
bump, nothing?
cali yarisCanoga Park, CA · Aug 25, 2011#3
Pictures would probably help a lot.
RogueYarisThread starterJAX · Aug 26, 2011#4
Originally Posted by cali yaris ↑
Pictures would probably help a lot.
The cone is touching the driver's side headlight.

It's not a full connection of the whole cone, just part of it closest to the front of the car.

Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Aug 26, 2011#5
you're sure everything is pushed together tightly?
RogueYarisThread starterJAX · Aug 27, 2011#6
Ok, here's a question:

Is it supposed to be a metal to metal contact between the intake and the engine?
cali yarisCanoga Park, CA · Aug 27, 2011#7
how about a picture of the other end?
I think you might be able to jam that filter on a little bit more?

It may just be a tight fit on the sedan; I know these work fine with the liftback.

It also doesn't look like there's a problem in terms of function.
RogueYarisThread starterJAX · Aug 27, 2011#8
It's on a liftback :p and functions great.

I'm just worried about scuffing up the driver's side headlight.

I know, shouldn't be a big deal in terms of resale value, but you never know.

Next time I'm tooling around in my engine, I'll try to snug things up even more but I thought everything was tight when I put it in.
Lil AbnerDublin, Ohio · Aug 28, 2011#9
No, I don't think you want the intake pipe to be touching the aluminum throttle body. So you could try to pull that one out a bit. But then loosen up the other connection points and try to push those sections closer together.
RogueYarisThread starterJAX · Sep 1, 2011#10
It's not touching as it is.

Been a lazy bastard since I got back and haven't done anything with it yet.

Then again the game I'm playing right now is down for maintenance.

Great time to look like a crackhead and tinker with my car.
cali yarisCanoga Park, CA · Sep 1, 2011#11
^ LOL
RogueYarisThread starterJAX · Sep 1, 2011#12
I just went out and tried shoring things up but I don't really have any space left.

Is there any sort of lubricant that I can put on there that would make it slide easier and not mess up the engine or rubber?
Bluevitz-rsOshawa, Ontario, Canada · Sep 1, 2011#13
^ silicone spray is fine to use on rubber parts.
Lil AbnerDublin, Ohio · Sep 1, 2011#14
Originally Posted by Bluevitz-rs ↑
^ silicone spray is fine to use on rubber parts.
Yeah, unless you put too much on and it gets into the engine and MAFS.

You could try a little bit of water and some good elbow grease.
thebarberGrand Rapids, MI · Sep 2, 2011#15
Originally Posted by Lil Abner ↑
Yeah, unless you put too much on and it gets into the engine and MAFS.

You could try a little bit of water and some good elbow grease.
you'd have to spray A LOT of lube on there to have it soak thru the filter and mess up the MAF sensor...lol

itll be fine rubbing the headlight...