Replies continued
Jason@SportsCarDebary, FL · Jul 17, 2014#51 Originally Posted by
RagnaCaT ↑ I second that... Wish I never get spares that way the junker works fine!
Hey Jason@SportsCar if swap the engine you change the class right?
Yes, we are limited to using the 1NZFE in H Production. However, it does get cams, a little head work and some other goodies.
I would love to build a Super Touring Lite Yaris with a 2ZZ. Someday.
RagnaCaTVillalba, Puerto Rico · Jul 17, 2014#52 Originally Posted by
Jason@SportsCar ↑ Yes, we are limited to using the 1NZFE in H Production. However, it does get cams, a little head work and some other goodies.
I would love to build a Super Touring Lite Yaris with a 2ZZ. Someday.
Great stuff... I'm porting the 2ZR and checking out the Prius piston swap soon after I finish playing around with XD tranny the only part Ineed are the axels. I got a junker that will ship a used set to my Dad in texas for 139.99 so tomarrow going to make the order.
RagnaCaTVillalba, Puerto Rico · Jul 17, 2014#53 Originally Posted by
CrankyOldMan ↑ Ok, just wanted to make sure we were talking about the same thing. The Yaris pinion *almost* fits the Celica bearing, but there's too much slop/play in the fit. Looks like I'll have to put the Celica pinion back together to make it work right.
Count the teeth on both gears of a set, divide output by input. That gives you xxx:1 ratio. I had to count some of them a few times to get it right, and had to use a marker to indicate every 10th tooth to keep from losing count.
ok let me see if I get it FD is 68 x 18 for the yaris 3.77 and 67 x 17 is 3.94 ??? I remeber we counted the Yaris teeth and the both had 67 x 17 only that the XD ring gear was taller I might be wrong
CrankyOldManThread starterWest Michigan · Jul 18, 2014#54 Originally Posted by
RagnaCaT ↑ ok let me see if I get it FD is 68 x 18 for the yaris 3.77 and 67 x 17 is 3.94 ??? I remeber we counted the Yaris teeth and the both had 67 x 17 only that the XD ring gear was taller I might be wrong
Yes, that's the right idea. I think you may need to count the Yaris again though, it should be 67:18 = 3.722. By "taller" do you mean the thickness of the gear, or taller/shorter gear ratio?
RagnaCaTVillalba, Puerto Rico · Jul 18, 2014#55 Originally Posted by
CrankyOldMan ↑ Yes, that's the right idea. I think you may need to count the Yaris again though, it should be 67:18 = 3.722. By "taller" do you mean the thickness of the gear, or taller/shorter gear ratio?
Taller is that the ring gear side by side the XD is taller than the Yaris ring gear
CrankyOldManThread starterWest Michigan · Jul 18, 2014#56 Originally Posted by
RagnaCaT ↑ Taller is that the ring gear side by side the XD is taller than the Yaris ring gear
Oh, yes, I noticed that too. If you just put the diff and pinion shaft in, they will scrape against each other. If you install the center housing and put the retaining clip on the bearing, it lifts the pinion shaft up a few mm, which should give plenty of clearance.
JerkrattFair Lawn, NJ · Jul 18, 2014#57So going for track use... Swapping XD final drive out of the first Gen would be the way too go?
RagnaCaTVillalba, Puerto Rico · Aug 11, 2014#58 Originally Posted by
CrankyOldMan ↑ Oh, yes, I noticed that too. If you just put the diff and pinion shaft in, they will scrape against each other. If you install the center housing and put the retaining clip on the bearing, it lifts the pinion shaft up a few mm, which should give plenty of clearance.
I was looking in to parts for my XD tranny 2 & 3rd syncros, and notice the the 3rd gear is the same for most toyotas with C5X, 2nd gear is for the XD and 09+ corollas and the 1st gear is unique to the XD. What can be the difference in them?
CrankyOldManThread starterWest Michigan · Aug 12, 2014#59 Originally Posted by
RagnaCaT ↑ I was looking in to parts for my XD tranny 2 & 3rd syncros, and notice the the 3rd gear is the same for most toyotas with C5X, 2nd gear is for the XD and 09+ corollas and the 1st gear is unique to the XD. What can be the difference in them?
I'm not sure I understand what you're asking for. The difference in gear ratios, the difference between part numbers for identical rations, or something else?
Jason@SportsCarDebary, FL · Sep 10, 2014#60 Originally Posted by
RagnaCaT ↑ The XD output shaft and ring gear are different to the Yaris, they are larger you can"t drop a Yaris diff into XD tranny also one thing to look at is that the XD output shaft bearing is wider its the one that is next to the DIff so I don"t know if it cahnges the case or if it's just a different bearing.
With the xD FD not really being an option due to bearing/shaft size, and I want to use my OS Giken LSD, I wonder if the 3.9 FD from the C150 in the Paseo would be a better option? I think that might only be a 6 bolt. How about the 4.0 from a C52?
CrankyOldManThread starterWest Michigan · Sep 11, 2014#61 Originally Posted by
Jason@SportsCar ↑ With the xD FD not really being an option due to bearing/shaft size, and I want to use my OS Giken LSD, I wonder if the 3.9 FD from the C150 in the Paseo would be a better option? I think that might only be a 6 bolt. How about the 4.0 from a C52?
I would stay away from the C15x series, since they're 6-bolt. Unfortunately, my research hasn't turned up anything in the C5x series with a ratio other than those on the Yaris and xB, but I've also never torn down a C52.
The output/pinion shaft bearing has the same OD, it's just a different ID. Easy to swap with a blind bearing puller. As far as overall dimensions go, the Matrix and Celica differentials seemed to fit just fine--the axial length between the taper bearings looks to be identical.
Jason@SportsCarDebary, FL · Sep 11, 2014#62 Originally Posted by
CrankyOldMan ↑ I would stay away from the C15x series, since they're 6-bolt. Unfortunately, my research hasn't turned up anything in the C5x series with a ratio other than those on the Yaris and xB, but I've also never torn down a C52.
The output/pinion shaft bearing has the same OD, it's just a different ID. Easy to swap with a blind bearing puller. As far as overall dimensions go, the Matrix and Celica differentials seemed to fit just fine--the axial length between the taper bearings looks to be identical.
Have you evaluated any of the S series boxes, like the S53 from the Celica?
xnamerxxso cal · Sep 11, 2014#63Jason you might want to look for the TRD 41201-NP100 final drive.
I believe the older AW11 MR2 and Celicas with the 4A-Fe engines used that final drive(4.058). Its a C52 so I'd imagine it would work.
Jason@SportsCarDebary, FL · Sep 11, 2014#64 Originally Posted by
xnamerxx ↑ Jason you might want to look for the TRD 41201-NP100 final drive.
I believe the older AW11 MR2 and Celicas with the 4A-Fe engines used that final drive(4.058). Its a C52 so I'd imagine it would work.
The TRD set has been listed as discontinued for years... Certainly its possible there is one out there, but good luck tracking it down.
frogerCalgary AB Canada · Nov 3, 2014#65hello ,sorry to bother you guys but i have been successful in using the c60 celica gears in my yaris c50 ,i could only use gears three , four and five ,the shaft of the c 60 is the same as the c50 except it is a little longer (for sixth gear ) , i also used a 4.31 off a first gen xb. I have also swaped internals out of a 09 corolla c59 into a xd case to get 4.31 final and a closer 1st and 2nd gear. i didn't want to cut the frame to get a c60.
xnamerxxso cal · Nov 3, 2014#66Do the gears just press on or is there more work involved using the C60 3-4-5 gears?
frogerCalgary AB Canada · Nov 3, 2014#67they just press in but i think you had to use the yaris synchros and sliding sleaves not the c60 celica ones