Yarisworld Archive

Will these fit?

10 posts · 4,017 views

Shawn DOriginal postIndianapolis,IN · Aug 9, 2011#1
Hey does anyone know if the 14" Honda HX wheels will fit on our cars without issues. I would assume they would but Just thought I'd ask to see if anyone is already running them.

Replies 9

thebarberGrand Rapids, MI · Aug 9, 2011#2
will depend on spoke design and offset....have some pics?
kimonaHuntington Bch, CA · Aug 10, 2011#3
I presume this is the Honda wheel you're talking about. I don't recall seeing any yarisworld member with these wheels. Unless someone can give you a definitive answer, I guess you'll just have to test fit.

1 attachment not included in this copy

weedtankCA · Aug 10, 2011#4
Had these on my old civic. They are 4x100 and about 45 offset. Should fit on the yaris..
kimonaHuntington Bch, CA · Aug 10, 2011#5
Originally Posted by weedtank ↑
Had these on my old civic. They are 4x100 and about 45 offset. Should fit on the yaris..
The bolt pattern and offset are fine, but with some 13's and 14's there may be an issue with brake caliper clearance.
33OHDover, Ohio · Aug 10, 2011#6
May have to run small (5mm) spacers, but I'd say there's a very good possibility they'll fit.

I ran 14" CRX SI wheels with 5mm spacers and they cleared.
CrankyOldManWest Michigan · Aug 10, 2011#7
Originally Posted by kimona ↑
The bolt pattern and offset are fine, but with some 13's and 14's there may be an issue with brake caliper clearance.
What about the hub ring diameter? Isn't that part of the load bearing?
WeeYariGeorgetown, Ontario, Canada · Aug 10, 2011#8
Originally Posted by CrankyOldMan ↑
What about the hub ring diameter? Isn't that part of the load bearing?
So long as the hub bore of the wheel matches or exceeds the Yaris hub diameter (which these wheels do), OP is fine. Just like any other aftermarket wheel, hub rings will be required to fill the gap.

I believe these wheels are manfactured by Enkei, and I've not heard of any issue with 14" Enkei wheels to clearing the calipers. This does however remain as the one and only potential fitment issue.
CTScottUSA, CT · Aug 10, 2011#9
The 4x100 Hondas are 56.1mm for the center bore (same as Mini Cooper) versus the 54.1mm for the Yaris. It is really hard to find hubcentric rings for that small of a difference, but with the proper tapered lug nuts you can run lugcentric.

This is a great reference for bore and lug pattern:
http://adaptitusa.com/referencebook.htm

And, this is the only place where I have seen off the shelf 54.1 to 56.1 hubcentric rings:
http://www.hubcentric-rings.com/size-56.1-54.1/
thebarberGrand Rapids, MI · Aug 11, 2011#10
at a 45 offset...id wager you'll need 5mm spacers to clear the calipers