Shawn DOriginal postIndianapolis,IN · Aug 2, 2011#1Hey I was just wondering if any of you guys do paintless dent removal on the side or know the process because I just bought a 07 hatch with some pretty deep hail damage on the roof and I was wondering if anyone could give me any tips or tricks. I plan on buying a couple tools but not sure what to get either
Any help would be appriciated
Thanks!!!
Replies 13
staticorexcivilwar town. · Aug 2, 2011#2There used to be a dent remover for sale that worked on some dents. I think Billy Maze even sold a version of it through infomercials. You suction-cupped the thing to the car on either side of the dent and tightened the center which you glued to the dent until it pulled the dent up and out. Kinda hard to describe but I would be looking for that before going to a shop.
OTA'sTOYHilo, Hawaii · Aug 2, 2011#3 Originally Posted by
staticorex ↑ There used to be a dent remover for sale that worked on some dents. I think Billy Maze even sold a version of it through infomercials. You suction-cupped the thing to the car on either side of the dent and tightened the center which you glued to the dent until it pulled the dent up and out. Kinda hard to describe but I would be looking for that before going to a shop.
Ding King
https://www.dingking.tv/?leadsource=...30-e-319737038 staticorexcivilwar town. · Aug 2, 2011#4^ Yes that's it. 👍
RedRideMiddletown, NY · Aug 2, 2011#5However, paintless dent removal places use a variety of methods to remove dents other than/in addition to, the brute force method that the dent king uses.
The deny king is worth a try but it does get mixed results acording to users.
Many say it's worthless for most dents.
Shawn DThread starterIndianapolis,IN · Aug 2, 2011#6Yeah I'm looking more into the metal rods that you use to get behind dent.
staticorexcivilwar town. · Aug 2, 2011#7The dents are that bad huh? Sorry, that's out of my help range. Good luck.
Shawn DThread starterIndianapolis,IN · Aug 4, 2011#8they aren't like sharp dents but I'd go through a lot of glue because there are probably about 40 on the roof.
henry98usa · Aug 5, 2011#9you want to buy tool but have you any knowledge that how to use them on dents b'coz this technique demands lots of practice and experience. so be careful.
RedRideMiddletown, NY · Aug 5, 2011#10 Originally Posted by
Shawn D ↑ they aren't like sharp dents but I'd go through a lot of glue because there are probably about 40 on the roof.
To be honest, perhaps you should see a couple of pros and ask their opionion and get a price from them.
It might be cheaper in the long run when you factor in all the work and frustration you will experience trying to get all the 40 dents out yourself and it still wont look right.
Shawn DThread starterIndianapolis,IN · Aug 5, 2011#11 Originally Posted by
RedRide ↑ To be honest, perhaps you should see a couple of pros and ask their opionion and get a price from them.
It might be cheaper in the long run when you factor in all the work and frustration you will experience trying to get all the 40 dents out yourself and it still wont look right.
Yeah I plan on getting a quote. and I know it takes alot of expierence- But I buy a lot of auction cars and I feel like it'd be a good technique to learn. Gotta start some time if I want to learn.
RedRideMiddletown, NY · Aug 5, 2011#12Ok but, you wiil need much more that the near worthlees Dent King and much knowledge.
TLyttleKeremeos BC · Aug 5, 2011#13What was that story about the blonde with the same problem, dents in her car. Someone told her to just blow real hard into the exhaust pipe, which she tried. Her blonde buddy showed up. "How stupid you are! You have to roll up the windows first!"
Shawn DThread starterIndianapolis,IN · Aug 6, 2011#14 Originally Posted by
RedRide ↑ Ok but, you wiil need much more that the near worthlees Dent King and much knowledge.
yeah I am looking at a set of tools for about $350.