EmergeOriginal postSacramento, CA · Aug 1, 2011#1This will probably require the help of all the audio genius yaris world has to offer.
I would like to exchange my current head unit and use my tablet instead as my entertainment center. It has been done with the iPad, and I would like to do it for my non apple tablet since I want to replace my head unit anyway.
For example, take a look at these videos:
http://www.youtube.com/watch?v=5SkltRqOF5k http://www.youtube.com/watch?v=SsU6RxHwsu4 But the absolute best, in my opinion is this one:
http://www.youtube.com/watch?v=rSnIXfoSU6I It's a 4 part series of videos, I think. You can find the rest easily after watching that one.
So, what do you guys think of these installs? Anyone, besides me, interested in doing this?
Replies 95
Lil AbnerDublin, Ohio · Aug 1, 2011#2What size tablet do you have? And I'm assuming it's an Android one. Does it have everything you'll need? GPS? AM/FM radio?
If the tablet is small enough to fit where the CD player was, that would make it very easy. If not, you'll need to do some fabricating. You'll need to figure out how you want to control your volume. If you're putting this into a STOCK Yaris, then you are going to need to add an amp to power your speakers. If you add an amp, you could get one that has a remote volume knob that you could mount in your dash. Then you'd just run a 3.5mm to RCA cable from the tablet, into the amp, which then feeds the speakers.
The kit in the first link is cool, but it also screams "STEAL ME!!" If you can mount it flush in the dash, making it look like some aftermarket radio, I think you'd be better off. There are plenty of us on here to help you through this!
EmergeThread starterSacramento, CA · Aug 1, 2011#3Fixed the last link.
sqcompBack at home · Aug 1, 2011#4I would suggest a good line output converter OR a processor that can help you take the level of the integration even further. I'm thinking anything from a JL Cleansweep or an MTX ReQ to an Audison Bit Ten D (or even better a Bit One .1) or a JBL MS-8. I just installed the Audison Bit One in my system, even though I don't NEED it. A piece like this gives you the ability for exptreme control.
EmergeThread starterSacramento, CA · Aug 1, 2011#5 Originally Posted by
Lil Abner ↑ What size tablet do you have? And I'm assuming it's an Android one. Does it have everything you'll need? GPS? AM/FM radio?
If the tablet is small enough to fit where the CD player was, that would make it very easy. If not, you'll need to do some fabricating. You'll need to figure out how you want to control your volume. If you're putting this into a STOCK Yaris, then you are going to need to add an amp to power your speakers. If you add an amp, you could get one that has a remote volume knob that you could mount in your dash. Then you'd just run a 3.5mm to RCA cable from the tablet, into the amp, which then feeds the speakers.
The kit in the first link is cool, but it also screams "STEAL ME!!" If you can mount it flush in the dash, making it look like some aftermarket radio, I think you'd be better off. There are plenty of us on here to help you through this!
I have the ASUS EeePad Transformer. It is, indeed, running Android (Honey Comb 3.2 to be exact.) OS. It has everything I need. As far as AM/FM goes, with an app I can be on any radio station in the country which is cool.
It is actually bigger than the double din I have going on. Which means I could do an ugly mount with some makeshifting, but that would look terrible in my opinion. I would rather do the type of install that looks much more OEM.
As far as controlling the volume, I would probably get a bit one like SQ recommended. Or, something like this:
Picture not included in this copy Picture not included in this copy Picture not included in this copy I think the biggest issue I will have is getting the tablet integrated to my interior. Currently, my car looks like this:
Picture not included in this copy But, installing the tablet where the radio goes now is not optimum for use during driving. Ideally, it would go where the AC controls start. But, how the hell could I possibly change the locations of the AC controls? Also, I have no way of molding stuff from fiber glass. I can barely use a screwdriver. =/
CTScottUSA, CT · Aug 1, 2011#6I totally missed the echo part until the last post. That's not a lot of space to work with and a tough position for that small of a screen. I messed around with the car PC thing a while back and actually drove around for a couple of months with a 10 color CRT mounted to the center of the top of the dash of my Subaru.
EmergeThread starterSacramento, CA · Aug 2, 2011#7Yeah, the small space presents some major problems with me if I want to try to have a factory look.
Lil AbnerDublin, Ohio · Aug 3, 2011#8I keep looking at this, and it seems like an interesting challenge. Moving the temp controls would be tough if you have no experience in molding. The better bet is putting in the stock location. But that seems like a terrible spot, and the viewing angle would be terrible. If you put it in the stock location, you'd have to angle it upwards to make it readable. You might be biting off more than you can handle. Sorry.
toy_torontoTarrana, Canada · Aug 3, 2011#9Curiosity got the best of me and made a huge mistake of opening this thread to learn about the OP's tablet model (the ASUS Eee Pad).
I am now endlessly searching for the best deal to get my hands on one including a dock 😠
😆
p.s. I don't plan to mount it to my dash lol (unless emerge finds an ideal way to mount it haha)
-toy
AltitudeColorado · Aug 3, 2011#10 Originally Posted by
toy_toronto ↑ Curiosity got the best of me and made a huge mistake of opening this thread to learn about the OP's tablet model (the ASUS Eee Pad).
I am now endlessly searching for the best deal to get my hands on one including a dock 😠
😆
p.s. I don't plan to mount it to my dash lol (unless emerge finds an ideal way to mount it haha)
-toy
I was thinking it's better to find something with a 7 inch screen so it's an easier fit. So far it looks like the Dell Streak might be a good option.
EmergeThread starterSacramento, CA · Aug 4, 2011#11 Originally Posted by
Lil Abner ↑ I keep looking at this, and it seems like an interesting challenge. Moving the temp controls would be tough if you have no experience in molding. The better bet is putting in the stock location. But that seems like a terrible spot, and the viewing angle would be terrible. If you put it in the stock location, you'd have to angle it upwards to make it readable. You might be biting off more than you can handle. Sorry.
Appreciate the honesty lol. I really don't want to buy a new head unit though. =/
EmergeThread starterSacramento, CA · Aug 4, 2011#12 Originally Posted by
toy_toronto ↑ Curiosity got the best of me and made a huge mistake of opening this thread to learn about the OP's tablet model (the ASUS Eee Pad).
I am now endlessly searching for the best deal to get my hands on one including a dock 😠
😆
p.s. I don't plan to mount it to my dash lol (unless emerge finds an ideal way to mount it haha)
-toy
The transformer is the best tablet out now; trust me, I researched for months@!
EmergeThread starterSacramento, CA · Aug 4, 2011#13 Originally Posted by
Altitude ↑ I was thinking it's better to find something with a 7 inch screen so it's an easier fit. So far it looks like the Dell Streak might be a good option.
If it's bought with the intent to integrate to your car's entertainment system, I agree. But, then again, it depends on what type of car you have. Some can handle the bigger tabs quite well.
eTiMaGoBangkok, Thailand · Aug 4, 2011#14get yourself an exogear exomount with tablet adapter:
http://www.mobimega.com/exogear-exom...martphone.html the suction cup also has an adhesive coating so it sticks to pretty much anything, you might be able to stick it in front of the speedometer and have the tablet hand in the area in front of that little pocket thing... worth a try!
toy_torontoTarrana, Canada · Aug 4, 2011#15 Originally Posted by
Emerge ↑ The transformer is the best tablet out now; trust me, I researched for months@!
I'm officially picking mine up tomorrow --Thanks for doing most of the leg work for me 😁
I agree, it's a very legit tablet per the reviews I've read.
-toy
EmergeThread starterSacramento, CA · Aug 5, 2011#16 Originally Posted by
eTiMaGo ↑ get yourself an exogear exomount with tablet adapter:
http://www.mobimega.com/exogear-exom...martphone.html the suction cup also has an adhesive coating so it sticks to pretty much anything, you might be able to stick it in front of the speedometer and have the tablet hand in the area in front of that little pocket thing... worth a try!
Cool products on that website. Thanks for the input, it might be worth a shot. 🎉
ezhacker1San Francisco · Aug 9, 2011#17i was thinking of getting a 7in android tablet too. Either the Galaxy Tab 7 ~$300 or the Nook Color ~$200 and get android on it. As for GPS, the nook color doesnt have it but i have a BT gps keychain anyways. Theres pros and cons to both but the IPS screen on the Nook Color seems the best in a carpc kind of role. Of course i want to do double duty with the tablet and undock it for normal day use..then again i already have the asus Transformer with dock.
With that said, im looking forward to see how you mount yours.
toy_torontoTarrana, Canada · Aug 16, 2011#18 Originally Posted by
Emerge ↑ Appreciate the honesty lol. I really don't want to buy a new head unit though. =/
Emerge, any update on this?
OT: I'm loving this Eeepad, have you rooted or OC'd your TF tablet yet? I'm thinking about doing mine.
ezhacker1San Francisco · Aug 17, 2011#19Rooted and OCed mine. OC is absolutely necessary to play Hulu..well root too. But in the end, i need more of a laptop than what even the docked form can provide. Afterall its still weaker than a netbook. Plus theres an update to the eepad coming very very soon with the new processor.
EmergeThread starterSacramento, CA · Aug 25, 2011#20 Originally Posted by
toy_toronto ↑ Emerge, any update on this?
OT: I'm loving this Eeepad, have you rooted or OC'd your TF tablet yet? I'm thinking about doing mine.
Saving money for it, I still also need to find a way to keep it charging while it is in use.
toy_torontoTarrana, Canada · Aug 25, 2011#21 Originally Posted by
Emerge ↑ Saving money for it, I still also need to find a way to keep it charging while it is in use.
In-car charging is actually pretty simple. The TF expects to see 12v before it starts to charge over USB (unlike other devices that works fine with 5v), so I would just modify the internals of this to supply the 12v directly to the USB pin 1 & 4 (pref fused at 1.5A):
Picture not included in this copy -toy
AltitudeColorado · Aug 25, 2011#22 Originally Posted by
toy_toronto ↑ In-car charging is actually pretty simple. The TF expects to see 12v before it starts to charge over USB (unlike other devices that works fine with 5v), so I would just modify the internals of this to supply the 12v directly to the USB pin 1 & 4 (pref fused at 1.5A):
Picture not included in this copy
-toy
I wouldn't recommend that. USB spec is 5v period. If his pad charges through the USB port then it charges using 5v not 12v.
toy_torontoTarrana, Canada · Aug 25, 2011#23EmergeThread starterSacramento, CA · Aug 28, 2011#24I'm going to best buy today to look at some stuff. Wish me luck!
ezhacker1San Francisco · Sep 2, 2011#25update?
AltitudeColorado · Sep 4, 2011#26Just picked up an Acer A100 Iconia 7" tablet (Honeycomb 3.2!). Over the next several months I'll be working on getting it installed and writing some custom SW to work with my bluetooth OBDII unit (which means I'll be selling my ScanGaugeII, Ultragauge and possibly my HU.)
The size of this tablet is almost a perfect fit for the OEM radio bezel. Hopefully I can work out an installation that looks super clean. It doesn't have cellular capability (I think the A101 does) but I think I can use my android phone and tether it when needed. Does have GPS, BT and WiFi so all that's good. Not sure if the USB port supports hosting, but I think the dock connector will so I might have to buy a dock and cannibalize it for the port connector.
Should be an interesting project and I think this is a better solution (less hassle and less cost) than a carputer which is something I always wanted to install but never had the time.
eTiMaGoBangkok, Thailand · Sep 4, 2011#27yep, the advent of (relatively) cheap, powerful tablets is going to make some big changes to in-car entertainment, that's for sure!
ezhacker1San Francisco · Sep 4, 2011#28 Originally Posted by
Altitude ↑ Just picked up an Acer A100 Iconia 7" tablet (Honeycomb 3.2!). Over the next several months I'll be working on getting it installed and writing some custom SW to work with my bluetooth OBDII unit (which means I'll be selling my ScanGaugeII, Ultragauge and possibly my HU.)
I just got a used Nook Color, its perfect with it's IPS screen, sure I could have gotten a real tablet but at $185, how could I say no. Doesn't have gps on board but externals are usually faster at refreshing.
Definitely interested in what oBd stuff you'll do, better than Torque?
tk-421Dagobah · Sep 5, 2011#29I pretty much scrubbed my earlier attempt at a carpc, and am looking forward to getting a Nook very soon as well. At $180ish it's too good a price to pass up. Heck, at that price it could almost be worth it to get a couple more for the rear seats (if I still had any 😁)
EmergeThread starterSacramento, CA · Sep 7, 2011#30 Originally Posted by
ezhacker1 ↑ update?
Found a decent solution for in car charging. Next step is deciding where the eff I am going to put this damn thing.
eTiMaGoBangkok, Thailand · Sep 7, 2011#31if I had the fabrication skills, I would get the blank 2-DIN plastic plate that the base models came with instead of a radio, and make some brackets that directly attach to that.
Which tablet did you buy? You should check if there is a desktop dock available for it, that would make for a good base, and keep the tablet easily removable, all you would need is a spring loaded clamp to hold it in place at the top.
AltitudeColorado · Sep 10, 2011#32Looks like finding the right amp is going to be the challenge. Been looking for a *small* 5 channel and they are hard to find. Something along the lines of the pic that Emerge has in one post only with the addition of a sub/5th channel.
Everything I see is huge wattage and for show. I don't care what it looks like. I don't need huge wattage either. I want to hide it, preferably behind the dash.
Emerge - Where did you get that pic of the tiny amp? I tried to search for it using the brand and model number on the unit and can't find it.
Test Fit:
2 attachments not included in this copy
ezhacker1San Francisco · Sep 10, 2011#33nice work, get nook in soon
Lil AbnerDublin, Ohio · Sep 11, 2011#34That fits quite nicely!
Altitude, look on eBay. There are a TON of small 2-channel, low power amps out there. They are usually $20-30. I personally have 2 tiny old-school Blaupunkt amps (2x25W) that I always used for my tweeters. I can't remember the site I found that had a ton of them. But here is an example of one I use to own:
http://www.crutchfield.com/S-FFyk0Ps...kt-PA2100.html Also remember, there is room under the passenger seat for an amp!
AltitudeColorado · Sep 11, 2011#35Thanks Lil Abner. Thing is, I already have an amp under the passenger seat for the SW. I think what I'll probably do is get a single DIN HU that has the outputs I need and also has an AUX input so I can hook the tablet up to it. There's room to stash the HU behind the tablet, just need to tie it down.
ezhacker1San Francisco · Sep 15, 2011#36Got my Nook Color installed. The bezel thickness is causing me some mind pain {installed as close to the radio trim as possible, needs some side trim pieces}. The tablet is too tall when laid horizontally. pictures to follow to explain. Tho it looks awesome to have Torque app running there.
I'd like to be able to remove the tablet from the car but right now ibhave to remove the HU trim to do so. It's too wide to just come out of the Double Din bezel
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
AltitudeColorado · Sep 18, 2011#37^ Nice work exhacker! How did you hook up your audio?
======================================
So I was messing around with getting the audio all setup and I think I've hit a show stopper.
Using the headphone output of the tablet and an aux in on an HU sounds like ass. Tried a little EQ and whatnot and I really can't get what I would consider good quality audio out of it. Major disappointment.
Edit:
Ok, so Bluetooth audio works and sounds great. Bypassing the analog output from the tablet is the way to go. Using an HU was a matter of convenience before, now it's a necessity. I had purchased a single DIN HU but it doesn't support audio streaming so I went to exchange for another one that did... only it doesn't, despite the description of the website. Guess I'll return that too.
My existing HU is perfect. It sounds great and has all the features I need. But it's double din and too big to tuck into the opening and still be able to get the tablet in there.
Plan B - found lots of space to the right of the HVAC core behind the glovebox. Gooing to put a little shelf in there to mount the HU on. I'm tired of searching for amps, EQ's, HU's and all that crap so I'm just going to stick with this idea. It should do the job and save me from investing any more money into the project.
eTiMaGoBangkok, Thailand · Sep 18, 2011#38looks good! Any pics of how you braced it in there?
ezhacker1San Francisco · Sep 18, 2011#39I take some pictures of the inside. No bracing whatsoever just cuts of plastic and friction fitting
eTiMaGoBangkok, Thailand · Sep 19, 2011#40I may buy my friend's HTC Flyer just for this... The Xoom is cool but just far too big and heavy, unless I could get a sturdy arm for it...
AltitudeColorado · Sep 19, 2011#41 Originally Posted by
eTiMaGo ↑ looks good! Any pics of how you braced it in there?
I realize this is directed at ezhacker but...
I used the existing HU brackets and screwed a piece of 7x3.5 poplar between them so that the wood lined up with the front edge of the brackets making a nice backplane. The Acer tablet is the perfect thickness to be able to just lay the tablet against the backplane and snap the bezel in place. Holds well enough that way without needing to bolt it down.
I did have to shave off a little dashboard plastic (1/8") where the bottom edge of the tablet meets a portion of the dashboard so that the tablet would sit low enough to clear the vents above it.
The last pic is to show where I had to shave a little plastic off.
5 attachments not included in this copy
eTiMaGoBangkok, Thailand · Sep 19, 2011#42I think I get the idea, sandwiched between the metal brackets and the plastic bezel...
Here's my masterpiece:
Picture not included in this copy
Picture not included in this copy
not exactly a factory look :D
AltitudeColorado · Sep 19, 2011#43 Originally Posted by
eTiMaGo ↑ I think I get the idea, sandwiched between the metal brackets and the plastic bezel...
Here's my masterpiece:
not exactly a factory look :D
It works and rounds out all the other gadgets you have 🙂 How's your audio sound coming from the headphone jack?
I'm pretty sure my issue was just crappy DAC's/amp circuit inside the Acer. Thank god for bluetooth!
eTiMaGoBangkok, Thailand · Sep 19, 2011#44well honestly after the first drive I took the xoom out, the cheapo mount I have just can't handle the weight. If I braced it somehow with foam padding, it might work out better, but it's just overall too clunky.
I'm actually pretty happy with the headphone jack output on the xoom and the phones, though I really must recommend PowerAmp and its equalizer for actually making it sound good!
ezhacker1 what bluetooth adapter did u use for the torque app and does it stay on when u turn off the key and remove the key
ezhacker1 what bluetooth adapter did u use for the torque app and does it stay on when u turn off the key and remove the key
ezhacker1San Francisco · Sep 21, 2011#47A cheapo $18 or so one from ebay. No issues whatsoever . Key must be in the on position for Torque to work, its in their insturctions
AltitudeColorado · Sep 24, 2011#48Completed install.
That tiny hole you see to the left of the screen is for the light sensor so I can have auto brightness on. The button with the green light on it in the second pic is so I can determine when to charge/run it on juice or have it run on it's own battery.
I'm thinking I might need to keep power to it during the winter to keep the unit warm and prevent the cold temps from affecting it.
2 attachments not included in this copy
eTiMaGoBangkok, Thailand · Sep 24, 2011#49very nice! Do you find any issues with glare on the screen or insufficient brightness?
eTiMaGoBangkok, Thailand · Sep 25, 2011#50PK, I'd think the cigarette socket adapter would have some basic voltage regulation electronics?
In other news I took the plunge and got my friend's Flyer off him cheap :) Pretty cool device I must admit, the stylus brings a lot more precision to certain tasks. Anyway, first thing was to load up the Modaco tweaked beta Honeycomb ROM that's floating around, works pretty nice! Next step will be to try and mount it as nicely as you guys did!