"G"Original postChicago · Jul 19, 2011#1Guys, I have 3 that have seem to go out on me. Have any of you had this problem? I tested for signal/ power at the harness end at the lock and they are getting signal/ power when the lock and unlock button is pushed. But they still do not work. The 3 that went out are the front drivers side, front passenger and rear drivers side. The only one that works is the rear passenger side. I removed one and can't find anything wrong with it visibly. See below. This is from a 4 door.
Picture lost · img801.imageshack.us
Picture lost · img42.imageshack.us
Picture lost · img687.imageshack.us
Replies 7
CTScottUSA, CT · Jul 19, 2011#2I can't imagine that three died at the same time, so I would suspect a wiring issue. You can fire the lock/unlock motor with it removed to test it. Which door's lock is that in the picture? In the picture, the connector doesn't look like it has as many pins as it should.
"G"Thread starterChicago · Jul 19, 2011#3Pictured is the rear drivers side. Their are only 2 pins. One for lock and unlock.
CTScottUSA, CT · Jul 20, 2011#4 Originally Posted by
"G" ↑ Pictured is the rear drivers side. Their are only 2 pins. One for lock and unlock.
You should be able to lock/unlock the assembly by applying power to those two pins. You reverse polarity to switch between lock and unlock. With it off of the car, you can probably fire the lock solenoid with a 9 volt battery.
"G"Thread starterChicago · Nov 18, 2011#5Yeah they are shot. All 3. Unbelievable.
DrivehooksOregon · Nov 24, 2011#6My front passenger door lock quite working months ago then a few weeks later my rear passenger lock quite working. I know they get power because they move slightly when I press the button. But they won't lock or unlock. I was hoping someone had a suggestion.
Klink10910 · Nov 24, 2011#7Wondering why this happened and if there is anything we can do to ward this off. Subscribed.
"G"Thread starterChicago · Mar 31, 2012#8No idea, bought 3 used ones at a junkyard and they work fine!