Yarisworld Archive

turbo fitment/tight space?

8 posts · 3,102 views

ilikericeOriginal postsavannah, ga · Jul 11, 2011#1
I got a question for you Boosted guys.

How painful is it to get to the turbo and all the oil lines when its installed? Do you guys go from the bottom or do you take the wiper motor cowl off and work from up top? Of course depending what you need to do depends if you go from top or bottom.

I ask cuz I'm a little indecisive if I wanna run a turbo on the yaris. I rather have the exhaust side up front when dealing with turbos.

Does anyone have any good pictures of the fire wall side where a turbo setup is installed. I know it fits and there is no question about that. I am more concerned about repair, maintence and upgrading in the future. Getting a wrench in there and stuff.

Replies 7

BrianRiverside, CA · Jul 11, 2011#2
You have to remove the wiper cowl and tray underneath it. So parts you need to install under the car but the majority of the work is done from the top. I took the turbo apart because it makes it a lot easier to install and get the fittings tightened all the way. Heres a pic of the turbo and firewall.

Picture not included in this copy
ilikericeThread startersavannah, ga · Jul 11, 2011#3
wow. looks like you got enough room, but the angle is aweful. Thanks for the picture. Is this the zage kit or custom piece together?
cali yarisCanoga Park, CA · Jul 11, 2011#4
^ Brian is running the Zage kit with his own return line.
BrianRiverside, CA · Jul 11, 2011#5
Originally Posted by cali yaris ↑
^ Brian is running the Zage kit with his own return line.
And my own feed line.

Here's another pic
Picture not included in this copy
ilikericeThread startersavannah, ga · Jul 11, 2011#6
Is the heat wrap neccissary on the down pipe or is it a precautionary?
BrianRiverside, CA · Jul 11, 2011#7
I say its more precautionary since it's so close to the ECU, my Boomslang harness, and other wires. When I get some time I'm gonna pull off the manifold and downpipe to get them ceramic coated.
ilikericeThread startersavannah, ga · Jul 11, 2011#8
nice. thanks for the input guys.