Yarisworld Archive

Ignition Kill switch?

7 posts · 12,312 views

DeatheggOriginal postCA · Jul 2, 2011#1
Hi Everyone!
I'm looking to install an ignition kill switch on my '10 Yaris hatch (theft prevention). I had one on my Festiva; a simple toggle switch wired into a low power coil wire, worked great. Engine would crank, but not start. (btw, No one ever found my switch that I hid inside the car, including someone I knew years ago who, at one time in his life, stole cars).

How would I go about doing this on a Yaris? Can I do a switch wired into the low power side of the ignition like the Festiva? This car is much more complex than the Festy was. Unfortunately I don't have a shop manual for the wiring diagrams, etc.

And, the simpler the better!

Thanks! :)

Replies 6

BLHCT · Jul 2, 2011#2
There is a sticky thread on the 2007 years manuals here.
It may give you an idea on how it maybe wired.
sexNY · Jul 2, 2011#3
is this meant to replace the immobilizer or to work in tandem with it?
nemelekArizona · Jul 2, 2011#4
Although I haven't put one on the Yaris, other cars I was able to splice into the ignition wire and hide a switch. Another option would be the wire going to or from the clutch start switch.
fnkngrvIn The Hotbox · Jul 2, 2011#5
Hit up CTScott on your question...he may even chime in on your thread.
DeatheggThread starterCA · Jul 3, 2011#6
Originally Posted by sex ↑
is this meant to replace the immobilizer or to work in tandem with it?
No immobilizer on my car, as far as I know. (has manual windows, etc, and the good old regular low-tech key, no remotes, etc)

Wiring it into the clutch switch sounds like a plan; I'll have to look into it.
eTiMaGoBangkok, Thailand · Jul 5, 2011#7
Is it a manual? We need to push the clutch down to complete the starter motor circuit. So you could achieve a similar effect with a hidden switch on that circuit... You could still bump or push-start the car, though!