ttr125fan09Original postcorpus christi, texas · Jun 14, 2011#1Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
so what do you think????
Replies 39
jpmck03USA · Jun 14, 2011#2Texas Longhorns fan?
Looks very nice!
Also, I notice that the 'main' color in the center console is orange, with the exterior trim white, and you did on the door sills the same with the main color as orange with the white accent piece as well. Looks very balanced out like that.
Good job! 👏
mazillaSan Jacinto California · Jun 14, 2011#3Looks good finish wise...the colors aren't for me, but that is not important. I thought about getting into the same project but the pillar moldings would bother me, then I'd end up painting everything. I didn't want to open that can of worms.
P.S. whadya get in the mail?? ;)
CrankyOldManWest Michigan · Jun 14, 2011#4Are you using vinyl dye? I can't imagine being able to preserve the texture of the surfaces with standard spay paint. Looks good!
ttr125fan09Thread startercorpus christi, texas · Jun 14, 2011#5 Are you using vinyl dye? I can't imagine being able to preserve the texture of the surfaces with standard spay paint.
nope just regular spray paint, just did several light coats
P.S. whadya get in the mail?? ;)
i actually got a trd emblem XD
thanks for thee good comments
mazillaSan Jacinto California · Jun 14, 2011#6 Originally Posted by
ttr125fan09 ↑ nope just regular spray paint, just did several light coats
What kind of prep, and what brand paint(made for plastic, etc?)? The finish is really great...must resist urge to buy paint...the hardware store calling my name.
ttr125fan09Thread startercorpus christi, texas · Jun 14, 2011#7all i did was spray it lightly with some cheap walmart brand spray paint for the white, and the orange i used krylon for plastic, and i didn't even clear coat it, cause i didn't want to be blinded while driving
rick996Coventry, CT · Jun 15, 2011#8Looks great although you didn't quite match the color of the Dr. Pepper bottle. 🤣
cali yarisCanoga Park, CA · Jun 18, 2011#9That looks great. 👏
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · Jun 18, 2011#10if you could get door panel fabric dots in orange it would be👍
NateDoggCanada · Jun 18, 2011#11 Originally Posted by
jpmck03 ↑
Texas Longhorns fan?
Looks like a Vans shoe fan to me. 😆
Nonetheless the white makes it look nice and clean, looks good.
Keep it up! 🎉
AltitudeColorado · Jun 18, 2011#12Mmmmm... creamsicle.
ttr125fan09Thread startercorpus christi, texas · Jun 28, 2011#13thanks for the comments... as for sandpaper i didnt use any because i wanted to keep the original texture, and yes orange dots would be nice..
ttr125fan09Thread startercorpus christi, texas · Jun 28, 2011#14Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
painted the center floor thingy, idk wat its called, but i painted it lol
mazillaSan Jacinto California · Jun 28, 2011#15Looks great.
shinleeaustin tx · Jun 28, 2011#16looks awesome, I might try that with a blue and white to match my car :D
SonerO.C., CA · Jul 6, 2011#17Are you going to paint all the dash orange? I think you need to :)
ttr125fan09Thread startercorpus christi, texas · Jul 6, 2011#18i really want to but my schedule is killing me, im try to slowly do the whole interior, along with some engine work😉
PacquiaoMA · Jul 6, 2011#19OP :
That is a FANTASTIC JOB. It looks AWESOME, man. 2 things: Wish you lived in MA so you could help me do a similar job. And that shift knob is effin' ugly, man. lol. Sorry, don't mean to offend.
😳
ttr125fan09Thread startercorpus christi, texas · Jul 8, 2011#202 things: i wish i could help that would be awesome, and I KNOW!!! i hate it, i just couldnt find one i like so i just said screw it for now
henry98usa · Jul 15, 2011#21it looks great friend.
swiddCentral Alabama, GOD BLESS AMERICA · Jul 15, 2011#22This is amazing. I bought spray paint from walmart too, but didn't achieve nearly similar results (I tried without sanding, but got bubbles/drops/blemishes, then I sanded and painted again, but when trying a second layer the paint again clogged up into bubbles instead of an even coat. More sanding and trying again...and eventually I got it black, but with a rough and uneven coating). It was a glossy black spray, and it said usable for "everything".
Did you pick one that was specific for plastic?
ttr125fan09Thread startercorpus christi, texas · Jul 15, 2011#23nope, just regular walmart spray paint, but you need to do extremely light coats, i was driving with out the center parts and floor center console for like 3 days, i did about 5 or 6 super thin coats.
i did get some bubbles in some places but i just sanded them and redid them
roneezy360San Diego · Jul 19, 2011#24Could you guys maybe make a quick little tutorial on how to paint the interior orange/white and/or red like this. I wanna do this to my yaris too but im kind of a beginner with painting. I dont know too much about paint and sanding and such lol.
ttr125fan09Thread startercorpus christi, texas · Jul 20, 2011#251. sit in your car and think about how you want to paint it, remember its your car be creative
2. start pulling off the panels that you want to paint, be careful not to break any clips
3.give the panels a good wash, and let them air dry, you dont want lint all over your prepd panels
4. start out with a couple of light coats of primer, just make sure it can be used on plastic
5. let it dry
6. now on to your color of choice, once again several light coats
7. let it dry
8. if you choose to use clear coat for a shiny finish do so, i didnt, i wanted the matte look
9. let the clear coat dry
10.start putting your panels back in, and enjoy
also if you want a shiny finish without clearcoat, you can also use gloss paints, i used flat paints
ttr125fan09Thread startercorpus christi, texas · Jul 20, 2011#26 Here's my interior !! thanks for your post because I didn't want to do the armrest I tought it was to risky
Attached Images
it looks awesome!!
roneezy360San Diego · Jul 25, 2011#27 Originally Posted by
ttr125fan09 ↑ 1. sit in your car and think about how you want to paint it, remember its your car be creative
2. start pulling off the panels that you want to paint, be careful not to break any clips
3.give the panels a good wash, and let them air dry, you dont want lint all over your prepd panels
4. start out with a couple of light coats of primer, just make sure it can be used on plastic
5. let it dry
6. now on to your color of choice, once again several light coats
7. let it dry
8. if you choose to use clear coat for a shiny finish do so, i didnt, i wanted the matte look
9. let the clear coat dry
10.start putting your panels back in, and enjoy
also if you want a shiny finish without clearcoat, you can also use gloss paints, i used flat paints
Wow, thanks dude. Thats pretty helpful information.
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · Jul 25, 2011#28 Originally Posted by
Soner ↑ Are you going to paint all the dash orange? I think you need to :)
PLEASE don't.....
ttr125fan09Thread startercorpus christi, texas · Jul 26, 2011#29 Wow, thanks dude. Thats pretty helpful information.
anytime, glad to help
PLEASE don't.....
i just might, not straight orange, throw some white in there
im in the process of making a gauge mount heres some pics
the idea
Picture not included in this copy sanding
Picture not included in this copy Picture not included in this copy almost done
Picture not included in this copy ttr125fan09Thread startercorpus christi, texas · Jul 26, 2011#30theres still actually alot of work still to go on the tach mount, but its starting to look good
Picture not included in this copy
Picture not included in this copy
ttr125fan09Thread startercorpus christi, texas · Jul 26, 2011#31Picture not included in this copy
beebosaurFullerton · Aug 25, 2011#32how is your project coming? it looks pretty sick so far.
mazillaSan Jacinto California · Aug 25, 2011#33Garage work in the living room, I like your style! Reminds me of when my workbench was our kitchen table...the wife loved that. hahaha
ttr125fan09Thread startercorpus christi, texas · Aug 26, 2011#34so far so good, bits and pieces here and there, work is time consuming lol, but it will be done, and soon hopefully!
samuraivinceDetroit, Michigan · Oct 15, 2011#35the paint idea is pretty cool guys, i would love to do blue to match my black and blue interior. also the homemade Tac mount is a great idea. i was gonna actually drill a hole in my "behind the stering wheel" glove box.......but i use it a lot.
ttr125fan09Thread startercorpus christi, texas · Oct 16, 2011#36thats the only reason why i didnt drill into my glovebox behind the wheel, i use it too much
samuraivinceDetroit, Michigan · Oct 16, 2011#37dude, i wanna see some pics of that custom tach when you finnish it. it's a smart place to put it, cuz if you put it on the door pillar it's to far away from our clusters in the center.
catliektheifLeesburg, VA · Oct 28, 2011#38i just painted my center console with my left over bayou blue metallic and clear coat i used for my eyelids. im not good at spray painting so it looks like crap. im waiting until daylight to see if i like it or not. :(
Picture not included in this copy
im going to have to sand it down and start over, the finish it terrible. but i like how it could potentially look!
oh, thinking that everything in the dash was just "pull apart" i stupidly broke the clips for th a/c controls so a firm push on the AC button and the hole knob will fall through... so dont do what i did.
Captain SlowScott, LA · Dec 4, 2011#39normally I'd be the first one to cry "rice", but since it's well done I'd say it looks nice. not my style...but nice nonetheless ;)
Sam8madnessTwin Falls, Idaho · Dec 7, 2011#40Very good looking man, please tell me you atleast used adhesion promoter though?
Did you make sure the clear had UV protection, considering most off the shelf stuff doesn't.
If you just straight sprayed it, it's only gonna look good for maybe 2 years before it's time to re do it. Lack of adhesion promoter will cause it to peel once the UV starts getting at it also.
Also, RED scotch brite is the perfect thing to prep plastic. Gives it enough bite for paint to stick to, but small enough texture to fill with paint.
Seriously though, ALWAYS use adhesion promoter, it replaces primer and is made for this exact application. Primer is not adhesion promoter, it's to help the color stay "true" and fill minor imperfections.
http://kustomaccessories.com/B0007UA...B0007UAXJQ.htm