Have you tried looking overseas for a lip?Originally Posted by wildmongoose26 ↑There are plans for the front just not sure what yet.
Want a front lip on the car but dont like any of the lips available for the 09+ so i'm looking elsewhere. Also already got a quote to widen the front fenders by 2". Just kinda tossing ideas around to see where this will end up.
thanks for keeping it on topic! ha
And yes I rub. I dont rub so bad alone in the car, I rub worse with 2 people in the car and a little more with a full tank of gas. Ha
Back from the bodyshop..new bumper and 2" wider in the rear :-)
83 posts · 29,392 views · page 2 of 2
Replies continued
how extreme to you want the front end? i know the front for the 09 up is difficult but have you thought about going 06-08 front end? you could always go c-one front 😉
So i am out of this thread.Good.
OP: GREAT job, looks good.
Thought about maybe looking at the Honda fit front lip. Its the same width just a matter of the same curve. But a little money to make it fit right would be different through and open up other ideas for other yaris owners as well
yeah that would be original! what gen would the lip come from though??
Originally Posted by wildmongoose26 ↑Thought about maybe looking at the Honda fit front lip. Its the same width just a matter of the same curve. But a little money to make it fit right would be different through and open up other ideas for other yaris owners as well
I like that. If u actually do it let us know what all was done, might have it done to the wifes lift back
ooOOOooo that be nice lil gift there partner ;)
A lot of people mod and use a lip from the Impreza. Just a thought. hahaha
why is that LOL? that could be an option.
I think once one person does it and figures its not that hard or how hard it is. it will be more common for us to do it.
I think once one person does it and figures its not that hard or how hard it is. it will be more common for us to do it.
that is true, he has your there laz ;)
I was being serious. hahahaha. Those Impreza lips really looks good on most cars.
As someone pointed out before, I need to stop laughing on my posts. hahahaha
As someone pointed out before, I need to stop laughing on my posts. hahahaha
Dang it! Need to stop that!
I believe it's this lip that people are using:
Picture not included in this copy
Picture not included in this copy
I found this kit a while back (it's for the pre '08's tho), and if you're going for a VIP theme, I think it would fit the style
Picture not included in this copy
Picture not included in this copy
+1 def a great bumper!
Prime example last Sunday. Pur Blu's car has a stance like the OP's car.Originally Posted by Kongo-Otto ↑Most of these "VIP" style cars use air suspension. Some others will clearly rub or have near to zero suspension travel and thats what i call "undriveable", because its dangerous. Thats my opinion which you don't have to share. Thank you!
He drove through the mountain with 4 of us following him. Drove back the same mountain on the freeway with a bunch of potholes and dips.
Its drive able...its not an opinion, its a fact. If you cant see that....well then, I dont know what to tell you. You might be better fitted into the category of people who buy expensive cars but dont know a thing about the damn car.
Sorry to put you down like that, but ignorance doesn't work well, especially on car forums where people are showing you prime examples. Whether its safe to drive as a daily driver....that varies from one person to another so i respect your opinion there.
To the OP:
I like the stance on your car, if you look at a members car - Pur Blu (check out the NCVC thread meets in California section),,, you can go even more wider and more camber all around. Overall nice work.
I'm just not digging the rear bumper trim below the reflectors, but hey it is what it is. 😁
Here's Pur Blu's car:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Here it is being driven:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Here it is being driven:
Picture not included in this copy
And we werent exactly going...following posted speed limits through that short windy road.
I think they are 8.5 or 9s..Pur Blu can chime in on it more~
Thanks Kaotic.
I think they are 8.5 or 9s..Pur Blu can chime in on it more~
Thanks Kaotic.
np
Not bad. I know you can go ALOT wider on the rear. Cant remember the orange car guys name that had the c-one kit but i now he has 10" on the rear. Probably something like a 15x10+38 or something with factory bodywork. With the amount of extra width on the rear of my car I could probably do a 16x12+38 or something along those lines. or a 16x10+0. The fronts would be the fun part.
As for Pur Blu's car it looks good. Its what he wants. My wheels are 16x8+0 and have very little poke and very little stretch. That was the point. I wanted less mexiflush and more flush on mine. Props to him on doing it though. Also if you look at the pull in the rear it doesnt flow with the rear bumper. A pronounced different between the 2. Mine is a smooth transition. Looks pretty much factory. Different strokes for different folks.
If/when I get new wheels i have alot more options for the rear.
As for Pur Blu's car it looks good. Its what he wants. My wheels are 16x8+0 and have very little poke and very little stretch. That was the point. I wanted less mexiflush and more flush on mine. Props to him on doing it though. Also if you look at the pull in the rear it doesnt flow with the rear bumper. A pronounced different between the 2. Mine is a smooth transition. Looks pretty much factory. Different strokes for different folks.
If/when I get new wheels i have alot more options for the rear.
Originally Posted by wildmongoose26 ↑Not bad. I know you can go ALOT wider on the rear. Cant remember the orange car guys name that had the c-one kit but i now he has 10" on the rear. Probably something like a 15x10+38 or something with factory bodywork.
That's Peter(Daddie Y) you're talking about...and his c-one kit is getting prepped for my car as we speak. :)
Those rims he has were custom modded stock steelies. I forget the specs, but they are pretty slick and look great.
I already explained my definition of driveable. You don't need to tell me anything. LOL@"don't know a thing about the damn car". I repaired all of my old cars many years ago while still at school, even whole cylindre heads, valves and stuff like that. Not to mention all kind of usual parts like brake calipers, brake shoes, suspensions, water pumps, timing belts and all kinds of fluids.Originally Posted by Kioshi ↑Its drive able...its not an opinion, its a fact. If you cant see that....well then, I dont know what to tell you. You might be better fitted into the category of people who buy expensive cars but dont know a thing about the damn car.
I know my english is not the best so sometimes people get me wrong or think it was some kind of offense. It is not meant like that. I am still learning. By the way don't forget i am from Germany. Car modding here is under strong regulation. Many things you do are not allowed here for safety reasons. So i put my experiences here as my measure. 🙂
Umm on that blue Yaris the front wheels need less poke and needs more of a drop, fenders need to be pulled more. The OP's is flush, pur blus ummm not so much.
Not taking anything away from Pur Blu. Just a different route. Wider wheels, not as low, mexiflush and just a aggressive roll/pull rather then a wider rear end. Looks good just different.
+1Originally Posted by wildmongoose26 ↑Not taking anything away from Pur Blu. Just a different route. Wider wheels, not as low, mexiflush and just a aggressive roll/pull rather then a wider rear end. Looks good just different.
Yours is very well done man! I showed pictures of it to a few of my buddies, its a well thought out setup man, should def take pride in it!
Pur blu is just waiting to get coilovers or something that can lower him more. He's just on springs right now.
Kongo-Otto, I think what you mean is cars that are hellaflush are harder to drive rather than undriveable.
And I thought the car modding scene out there was big?
And I thought the car modding scene out there was big?
It is. But it is very different, too. And more expensive because nearly any part needs an official certificate and many parts need to be examined at your own car after modding by official technicians. Otherwise you could get in trouble with the insurance, police and you will lose your operating license for your car. This means the car is illegal for street use.Originally Posted by Kaotic Lazagna ↑And I thought the car modding scene out there was big?
To put in in another way: You can not buy some springs or coilovers, mount them and be happy. The car has to get an alignment (wheels and headlights) and has to be approved by an engineer (not an ordinary mechanic at your dealer). This engineer will write down some kind of certificate which tells anybody that your car is still legal for street use. If there is any tire rubbing or not enough ground clearance -> no certificate. Thats why i thought your VIP cars use airride, too. Many cars here use them if they are super low. Its just for the show and people are not allowed to drive them this way. 😉
And of course there are some illegal cars in germany on the roads. But these people will risk their licence because major violations will be saved into a database. You get points and if there are too much of them the license is lost.
Lol who would try to get a flush look on springs??? I was wondering why his car is in 4x4 modeOriginally Posted by Kaotic Lazagna ↑Pur blu is just waiting to get coilovers or something that can lower him more. He's just on springs right now.
Kongo-Otto: That sucks about the certification process.
jekgmb: He's going the other way around, working around his fitment.
jekgmb: He's going the other way around, working around his fitment.
Originally Posted by wildmongoose26 ↑Well...finally after 4 months of not having the car "right" I have it back and I'm happy.
Had issues with the original bodywork done to the car after the 1st accident and the day after we picked it up from the first (piss poor) body shop we got rear ended and the ings+ rear bumper died.
Picked up a c-one rear bumper and got to work fitting the wheels.
16x8+0 xxr 002 wheels in the back. Stuck out a good 1-1.5" past the fender. Add 3 degree camber shims. Roll and pull didnt clear it well enough. So widened the rear by 1". All factory sheet metal. Lemme know what ya think.
Any updates or mods added since the OP?
Also could you explain how the widening process using factory sheet metal is done? Thanks
Great looking car.
THIS CAR IS SICK!!!!!!!!
Mongoose......your car is looking sweet dude......be proud of how it looks and enjoy the hell out of it.Looks pretty drivable to me,good job and remember if it dont rub yo did it wrong and if it dont scrape.....try harder.