Yarisworld Archive

2011 autocross goodness (east coast)

10 posts · 6,246 views

Blown_xaOriginal postVirginia · Jun 8, 2011#1
I finally got a decent set of tires , Hankook z214 c71 . They really put my nt01's to shame. Now that I compete in SCCA events I was at a disadvantage running 100 treadwear tires in smf. Hankooks seem to be the answer for those who don't want to break the bank with Hoosiers.

Here is recent results from a NASA autocross , I squeezed 9th overall against some very hardcore front runners with dedicated track / autocross machines . I really need an LSD still, but other than that the xa is dialed in.

http://www.get-fast.net/nasacross/052911res_raw.htm

Replies 9

cali yarisCanoga Park, CA · Jun 9, 2011#2
Great results! I'm sure a lot of people were saying "um.... what just happened?"

post your suspension set up?
Jason@SportsCarDebary, FL · Jun 9, 2011#3
Originally Posted by Blown_xa ↑
I finally got a decent set of tires , Hankook z214 c71 . They really put my nt01's to shame. Now that I compete in SCCA events I was at a disadvantage running 100 treadwear tires in smf. Hankooks seem to be the answer for those who don't want to break the bank with Hoosiers.

Here is recent results from a NASA autocross , I squeezed 9th overall against some very hardcore front runners with dedicated track / autocross machines . I really need an LSD still, but other than that the xa is dialed in.

http://www.get-fast.net/nasacross/052911res_raw.htm
All that power and an open diff. 😢 I bet you could pick up a second with an LSD. I am sure Garm can set you up with a nice OS Giken unit, you wont be disappointed.
Blown_xaThread starterVirginia · Jun 9, 2011#4
Yea I forgot to say that I run wastegate boost pressure when I autocross . Puts me about 170whp which is plenty for autocross, just enough power to where 2nd gear hooks up without burning tires . Kind of a flip because I usually leave it on high boost driving ... get to the race and lower it haha.

will post suspension later.
Blown_xaThread starterVirginia · Jun 9, 2011#5
suspension setup ...

Progress coilovers 450lb front springs, 200 rear
Tokico HP rear shocks
front sway deleted
Progress rear sway

949 racing 6ul wheels 15x8
Picture not included in this copy

1 attachment not included in this copy

ilikericesavannah, ga · Jun 10, 2011#6
if u dont mind me asking. what offset are u running with 15x8?
ShinareOklahoma City, OK · Jun 10, 2011#7
Originally Posted by Blown_xa ↑
...
Attachment 42314
Your car reminds me of this:

Picture not included in this copy

😁
Blown_xaThread starterVirginia · Jun 10, 2011#8
Originally Posted by ilikerice ↑
if u dont mind me asking. what offset are u running with 15x8?
I believe they are 35 or 36 offset, I also run 20mm front wheel spacers and 10mm rear hub spacers.
MonstarYarisThe Moon · Jun 12, 2011#9
Ive see your car all the time when I go to Ptunning. Nice setup and car. 👍
Blown_xaThread starterVirginia · Jun 12, 2011#10
Originally Posted by MonstarYaris ↑
Ive see your car all the time when I go to Ptunning. Nice setup and car. 👍
Thanks!


Ok so I did another autocross today, I never felt that I nailed a run. I had a hard time getting the coarse down as it seemed choppy to me. And the design today made me realise I probably am giving away a lot running open diff. Off camber turns and uphill start... no good. There were about 250 racers too, so 4 runs was it ( Im used to NASA's 7 runs).

There were things I did, and didn't like about how SCCA does things. But Im gonna do several more during this summer, then Ill judge.