IsLNdbOiOriginal postLas Vegas, NV · Jun 7, 2011#1Replies 12
sickpuppy1Kansas · Jun 7, 2011#2Your head unit says 50w x 4 but that is peak power, probably not continuous.The Alpine would probably should better for sure. The head unit would probably run real hot trying to pump out that power too and shorten the life span. I say go with the alpine amp and run RCA cable from head unit to amp and enjoy!
IsLNdbOiThread starterLas Vegas, NV · Jun 7, 2011#3The Alpine amp. is a plug and play unit made for Alpine HUs. It can be modified to work with other brands though. I guess I'll go with it.
_S7V7N_South Texas · Jun 7, 2011#4Are the 6.75's and tweeters rated together at 6-60 watts or individually ? If individually, you're not gonna be hitting nowhere near the max rms (60 watts) with that amp.
sqcompBack at home · Jun 7, 2011#5^That being said, a standalone amplifier is MUCH better than a deck "amplifier".
IsLNdbOiThread starterLas Vegas, NV · Jun 8, 2011#6Obviously.
I just don't want to go through the trouble of running all those RCA wires and then extending the stock speaker wires to the amp..
sqcompBack at home · Jun 8, 2011#7What shops do you know around LV?
I am closely acquainted with Jon Web and Troy McGregor at Performance Audio. I can tell you that they can work with you on a project like this if you wanted. I could probably pull a discounted rate versus a stranger walking in as well.
_S7V7N_South Texas · Jun 8, 2011#8That add-on is saying 45 watts RMS, It'll sound better than the 20 watts RMS your deck is putting out. Here's a thought, Run the tweeter off your stereo and the 6.75 off the add-on, if possible, idk how that thing will be wired in.
sqcompBack at home · Jun 8, 2011#9^You could bridge the 4 down to a two channel. You'll probably have around double the power going to the mids in most cases. Watch the level on the tweeters. If you crank the stock deck too much you'll most liekly end up clipping the signal to the tweeters.
IsLNdbOiThread starterLas Vegas, NV · Jun 8, 2011#10 Originally Posted by
sqcomp ↑ What shops do you know around LV?
I am closely acquainted with Jon Web and Troy McGregor at Performance Audio. I can tell you that they can work with you on a project like this if you wanted. I could probably pull a discounted rate versus a stranger walking in as well.
I don't know any shops in Vegas. I've always installed things myself. I did install a four channel Alpine PDX in my previous car and it was too much work for me.
I went ahead and installed the Z130BT last night and it sounds good to me w/o an amplifier (using my stock speakers still). Dunno how it'll sound with those Kicker speakers.
sqcompBack at home · Jun 8, 2011#11Well, if you feel the need, let me know. I'll pave the way for you at Performance Audio.
Take some time to visit Troy and Jon if you want to feel them out. Mention that John from Team Hybrids sent you their way.
7035 W. Sahara Ave. Ste 200
Las Vegas, NV 89117
(702) 538-8678
IsLNdbOiThread starterLas Vegas, NV · Jun 8, 2011#12Thanks, I'll keep them in mind for when I do decide to add an amp..
_S7V7N_South Texas · Jun 8, 2011#13It's gonna power the heck out your factory speakers since they're only like 10 watts RMS. That Pioneer deck is pretty damn good if you ask me, and if you ever want to put in an amp it's pushing 4 Volt preamps. Maybe you'll be surprised and the new speakers you install will sound awesome. Keep us posted.