Yarisworld Archive

Could it be this easy?

18 posts · 4,378 views

QmobileOriginal postHoytville, ohio · Jun 1, 2011#1
Is all that holds the back seat is a few in the back(trunk side) and on the front(engine side)? I've been thinkin about removing it for sometime now...not only for the lil weight savings but also gives me a excuse to not drive more than 1 passenger 😁 SO could it really b THAT simple just take out a few bolts and ba-da-bing ba-da-boom?

Replies 17

matthewaiunited states · Jun 1, 2011#2
i say start takin bolts out and see whats what you know what im sayin ? how ya doin, how ya been ? forgettaboutit
QmobileThread starterHoytville, ohio · Jun 1, 2011#3
gettin there.......n I mite try that need to be clean out real good anywho so. All I've seen is there's supposed to be torx bolt but when I looked they were just the regular bolt. I'm gonna keep the rear trim where it's at
matthewaiunited states · Jun 1, 2011#4
just do a search i know theres a prob a thread on how to do it
QmobileThread starterHoytville, ohio · Jun 1, 2011#5
I did.....that's where I got the torqx bolts....but mine looks like just regular bolts so idk
Klink10910 · Jun 1, 2011#6
They may have changed the bolts for your year. Mine had torx (07) and that was all that was it. Mine was 60/40 don't know if that makes a difference (seat type) as far as bolts are concerned. Hardest part was doing it (one man) and lifting them out without scratching or dinging anything. I do like how it looks today and I've had several dealer salespersons tell me that they would have no problem getting rid of the car for me if I wanted to trade (of course).
QmobileThread starterHoytville, ohio · Jun 1, 2011#7
I have the 60/40 split 2, maybe it's just a year to year thing.
AltitudeColorado · Jun 1, 2011#8
I've got the 60/40, but I think the bolt pattern is the same for the bench seat too. If I recall correctly there are 4 bolts on the back of the seat(s) and four on the front.

It's not hard to get the rear seat(s) out, just a bit awkward with the 60/40 split.
why?harnett county NC · Jun 2, 2011#9
yup, it is that easy. The car is much better without it.
eTiMaGoBangkok, Thailand · Jun 2, 2011#10
60/40 is a bit trickier than the bench seats, but yeah, get the appropriate socket and you'll be a happy camper. If you never plan to put them back in, someone here might want to buy the seats off you to upgrade form the regular bench seats...
QmobileThread starterHoytville, ohio · Jun 3, 2011#11
I mite as well get a star socket set.....never know when I mite need 1 again
WeeYariGeorgetown, Ontario, Canada · Jun 3, 2011#12
Originally Posted by Qmobile ↑
I mite as well get a star socket set.....never know when I mite need 1 again
Outside of a reinstall, NEVER. LOL. Damn things.

Hmmm, Ohio not too far away. Seat swap????
QmobileThread starterHoytville, ohio · Jun 3, 2011#13
hmmm fold flat?
WeeYariGeorgetown, Ontario, Canada · Jun 3, 2011#14
Rear bench dosen't exactly fold flat. They leave a slight ridge between truck cover and seat back, as well as tip upward at approx 5 degrees.
QmobileThread starterHoytville, ohio · Jun 3, 2011#15
ah so bout the same as now pretty much. dose it still slide like mine now?
WeeYariGeorgetown, Ontario, Canada · Jun 3, 2011#16
No slide 👎
QmobileThread starterHoytville, ohio · Jun 3, 2011#17
Originally Posted by WeeYari ↑
Outside of a reinstall, NEVER. LOL. Damn things.
Knowing my luck I'd need one down the line.......plus how much could they be? or could see if my uncle(aka mechnic) has 'em 2 geuss
QmobileThread starterHoytville, ohio · Jun 3, 2011#18
Originally Posted by WeeYari ↑
No slide 👎
hmm intresting