Yarisworld Archive

Did the "Home Depot" lip.

76 posts · 53,750 views · page 2 of 2

Replies continued

mr_milesPortland, OR · Mar 3, 2012#51
how about a link then? :)
ROCKLAND TOYOTAROCKLAND COUNTY NY · Mar 4, 2012#52
Originally Posted by coheed ↑
Yes there are more pics of my car, but I don't feel like putting them in this thread. They are in other threads.
SO your done posting in this thread?
catliektheifLeesburg, VA · Mar 27, 2012#53
i did the hd lip today it ran me about 20 bucks cause i had to buy two rolls of the double sided tape ($5 each) and the stripping ($10). i think it looks pretty cool but i dont like how i can see the double sided tape sticking out a bit. did i do it wrong?

im kind of nervous about it falling off but i have the screws and washers i just cant put them in because my drill doesnt fit under the car! i have to find time to lift it but i only have the emergency jack.

Originally Posted by Kaotic Lazagna ↑
It's a rubber seal, I don't think the paint will hold, and if it does, the second the "lip" bends, the paint will crack.
with the left over weather stripping, i sprayed all purpose primer and base coat on to it. the foam absorbed the paint and it looks like it could be promising.

Picture not included in this copy

ignore the messy part.. i was bending it to see what it would do but while it was wet and touched it to itself.

ANYWAYS

Im thinking about picking up another pack of weather stripping tomorrow and painting it properly to see how it works out.. but after painting my eyelids, a/c control panel, foglight bezels, part of my rear bumper, and the scraps i painted.. i might need to order another can of paint first.
Black_griffin6Thread starterAtlanta Georgia · Mar 27, 2012#54
Originally Posted by catliektheif ↑
i did the hd lip today it ran me about 20 bucks cause i had to buy two rolls of the double sided tape ($5 each) and the stripping ($10). i think it looks pretty cool but i dont like how i can see the double sided tape sticking out a bit. did i do it wrong?

im kind of nervous about it falling off but i have the screws and washers i just cant put them in because my drill doesnt fit under the car! i have to find time to lift it but i only have the emergency jack.



with the left over weather stripping, i sprayed all purpose primer and base coat on to it. the foam absorbed the paint and it looks like it could be promising.

Picture not included in this copy

ignore the messy part.. i was bending it to see what it would do but while it was wet and touched it to itself.

ANYWAYS

Im thinking about picking up another pack of weather stripping tomorrow and painting it properly to see how it works out.. but after painting my eyelids, a/c control panel, foglight bezels, part of my rear bumper, and the scraps i painted.. i might need to order another can of paint first.
What kind of tape did you use? I used the heavy duty outdoor tape that is supposed to hold up to 5 pounds, and after a year my lip is still there. 👍

You also have to be sure to use rubbing alchohol on the spot where you are applying the tape so that the spot where you're using the tape is clean and is sticking to the surface of the car and not the dirt under the car.

Post some pictures! Let's see how it turned out. 👍
33OHDover, Ohio · Mar 27, 2012#55
Originally Posted by coheed ↑
Honestly I dont feel like posting more pics here and steering this thread farther away from the original topic. If you want to see more pics of my car go look at some of my other posts in other threads. If enough people ask I might do a DIY for it.
DIY please. 🙂
ROCKLAND TOYOTAROCKLAND COUNTY NY · Mar 27, 2012#56
Originally Posted by Black_griffin6 ↑
What kind of tape did you use? I used the heavy duty outdoor tape that is supposed to hold up to 5 pounds, and after a year my lip is still there. 👍

You also have to be sure to use rubbing alchohol on the spot where you are applying the tape so that the spot where you're using the tape is clean and is sticking to the surface of the car and not the dirt under the car.

Post some pictures! Let's see how it turned out. 👍
3M double sided BLACK ......
enviriCT · Mar 30, 2012#57
man, the HD lip now seems played out! I must find another lip...
ROCKLAND TOYOTAROCKLAND COUNTY NY · Mar 30, 2012#58
Originally Posted by enviri ↑
man, the HD lip now seems played out! I must find another lip...
why cause 5 people have it done??
Klink10910 · Mar 30, 2012#59
Originally Posted by TOLMACH ↑
I am curious where did you find the stiff OEM lip? Toyota Dealership?

Is it unique to 2009-2010 HB?

Thanks
Thanks for asking as I am curious also. Part# and pic of it installed if possible.
catliektheifLeesburg, VA · Mar 30, 2012#60
Originally Posted by Black_griffin6 ↑
What kind of tape did you use? I used the heavy duty outdoor tape that is supposed to hold up to 5 pounds, and after a year my lip is still there. 👍
Post some pictures! Let's see how it turned out. 👍
sorry i havent checked yw forums in a few days but i ended up borrowing my friends jack/stands and i got under with the drill just fine. but i used the heavy duty outdoor tape too, i just wanted to make sure it would stay on..


but heres the final product + a plastidipping of my bumper lol

Picture not included in this copy

im actually way more satisfied with the hd lip than i thought i would be. i thought it looked cheap in pictures but seeing it in person (and on my car) it looks awesome.



oh and for anyone that was wondering, when i tried color matching the hd lip scrap, it didnt work. the paint cracked after drying. cheers!
daf62757Indianapolis, Indiana · Mar 30, 2012#61
Just curious, is there any mileage advantage to this or is it all for looks?
mazillaSan Jacinto California · Mar 30, 2012#62
Originally Posted by daf62757 ↑
Just curious, is there any mileage advantage to this or is it all for looks?

Looks mainly...I put one on my bumper to protect it from hitting shit and getting scratched again.
DARKSCOPE001Pickerington Ohio · Mar 30, 2012#63
Im thinking about doing this because the previous owner of my car took the lip of my yaris up acrost something HARD! nice and scuffed under there and the factory stock lip had 3 screws missing. (sure hope it didnt happen when i loaned my mom my car for the day 🙁 ) either way I need a cover up and this looks like it.

Thanks
Sean Scott
SAV912Savannah, GA · Mar 30, 2012#64
Originally Posted by TOLMACH ↑
I am curious where did you find the stiff OEM lip? Toyota Dealership?

Is it unique to 2009-2010 HB?

Thanks
I gotta be honest, I don't know the part number. I will do some digging though. I know it isn't exclusive to hatchbacks, or the '09+s but the reason I ended up with an OEM stiff replacement is because my car got hit on the front with the original bumper and HD lip that I had installed on that.

When I got the car back from the shop after the bodywork, it had the stiff replacement lip, so I sorta scored the OEM for free. 😁

-C
Klink10910 · Apr 8, 2012#65
Originally Posted by mr.white_hb ↑
These Lips are just only Cosmetic and do not help with Fuel Economy but here's what can help fuel Eco. .... performance spark plugs and high quality spark plug wires and make your engine breath better exhaust and air intake !
Interested in your post. Have you got specifics on the wires and plugs?
ROCKLAND TOYOTAROCKLAND COUNTY NY · Apr 9, 2012#66
Originally Posted by mr.white_hb ↑
These Lips are just only Cosmetic and do not help with Fuel Economy but here's what can help fuel Eco. .... performance spark plugs and high quality spark plug wires and make your engine breath better exhaust and air intake !
WIRES?? you mean i can get rid of my COILS
matthewaiunited states · Apr 30, 2012#67
guys the streets of brooklyn are tough i avoided a drunk driver and hit a monster pot hole or dip in the road whatever it was has ripped my little stock lip thing off so i want to do the hd one. from looking at you guys it just screws into the holes that are there already and maybe some extra 3m tape, and it should be fine correct?

2 attachments not included in this copy

JumpmanYarisSO. INDIANA · Apr 30, 2012#69
KL why is urs so wide?
JumpmanYarisSO. INDIANA · Apr 30, 2012#70
The seal ofcourse 😳
TickleTimeTimArkansas · May 2, 2012#71
That 3m does not wanna hold to the rubber. Gonna drill small holes and do the zip tie route I guess. Can't figure out the best way to position it so that it would look like a legit lip.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 2, 2012#72
Originally Posted by TickleTimeTim ↑
That 3m does not wanna hold to the rubber. Gonna drill small holes and do the zip tie route I guess. Can't figure out the best way to position it so that it would look like a legit lip.
you need the 3M BLACK tape #06383........
TickleTimeTimArkansas · May 2, 2012#73
Originally Posted by ROCKLAND TOYOTA ↑
you need the 3M BLACK tape #06383........
Thank you, ill hit home depot up tomorrow
TickleTimeTimArkansas · May 3, 2012#74
At home depot and they don't have the tape. Lame.
matthewaiunited states · May 7, 2012#75
its pretty good i guess haha hopefully it stays on hahah

1 attachment not included in this copy

nobodywiseCayman · Feb 23, 2014#76
Originally Posted by mr.white_hb ↑
**Not Slow Speed Internet ready -> a few pics**

This is my "Home Depot" Lip DIY Version 2.0
(1 long garage door seal cut it half and sicked together upside down)

Picture not included in this copy
I used Double-side tape with plastic door trim cut flat and sicked it to the bottom of the lip edge to stiffen it.

Picture not included in this copy
Test Fitting to see how it looks

Picture not included in this copy
DIY Front Lip complete. ... I wonder though if vinyl lettering would stick to the rubber ... if it can maybe I will add a cool vinyl sticker to it.

I took the idea of this new style Lip from here:
http://forums.nasioc.com/forums/show....php?t=1526863 (Credit goes to NASIOC Fourm user Mobutusan, for Front Lip Version II)

See where my Falkin logo is, I'm thinking of blacking out the white area there with black matte vinyl ?!? make the front look more agressive, what you guys think?
Next Project... DIY "Home Depot" style side skirts... might try paint the rubber as well, maybe plasti Dip spray paint will work!?!
What size rims are those?