aruesterOriginal postGermany · May 26, 2011#1So I was out on Nurburgring last weekend with my buddy's mustang and really just wanted to get my Yaris out there! I'm not very savvy on set-ups and heavy mech work but can turn a wrench.
Any thoughts on a good maybe top five reasonable mods to make a 2009 3dr Yaris fun on the Ring? I got the factory/dealer lowering but maybe stablizer bars? sway bars? any specific(brands, specs, ect) would be VERY helpful. Thanks!
Replies 11
SilverBackEl Monte, Ca · May 26, 2011#2You lucky guy. Every track monkey here wants to run the 'Ring. 😲
Suspension work is the best friend of the Yaris. Make the most of the small size and short wheelbase by adding coilovers, crossbars, and anything else to stiffen and stabilize the car (especially the rear end). Also helps if you run lightweight wheels on very sticky tires. Good luck, and post your times for us!
Jason@SportsCarDebary, FL · May 26, 2011#3#1... A good set of front brake pads. That is a long lap, with some very high speed sections into very slow turns. Even with the relatively low terminal velocity of the Yaris, I suspect you could kill the pads very quickly.
Kongo-OttoGermany · May 27, 2011#4Once upon a time i drove a Toyota Starlet around the Ring and managed to kill the brakepads in the first half of a round. They overheated and the discs went purple and golden in color.
And because the Ring is a very old racetrack your car should have enough ground clearance. Most cars driving there are not very much lowered.
HTM Yarissouth Carolina · May 27, 2011#5If ya want to stay cheap , just get tires , brake pads and better brake fluid . Oh and maybe add some air ducts to help with cooling those brakes .
aruesterThread starterGermany · May 28, 2011#6This is what I have or have on order. Please let me know thoughts. I can't wait to get on the track. I will definately post times!
Factory/Dealer - lowering springs(eibach)
Katana Racing Type 17" wheels(free! but need to be refinished), 215/40R17 83H tires(also free!)
ON ORDER - Whiteline Sway bar(Rear), DC Sports upper strut bar(Rear), Cusco's OS Strut Tower Brace(Front), K&N Intake, Short shifter, CarboTech pads, ATE Super Blue Racing Brake Fluid, lite crank/alt/water pump pulleys.
mazillaSan Jacinto California · May 28, 2011#7I'd say a dash cam is in order...I gotta see this.
aruesterThread starterGermany · May 28, 2011#8I'm really hoping for something under 10 mins and of course to SMOKE my buddies GT pony...
See what I can do about a cam
SilverBackEl Monte, Ca · May 28, 2011#9 Originally Posted by
mazilla ↑ I'd say a dash cam is in order...I gotta see this.
+1
SLIK4Clearwater, Kansas · May 28, 2011#10 Originally Posted by
mazilla ↑ I'd say a dash cam is in order...I gotta see this.
+2 and a sticky so we all can continue on with you :)
aruesterThread starterGermany · May 29, 2011#11I will keep posted! Just waiting on all the goodies. I'm hoping to get my first laps in with the new set-up before the end of June because then I will be gone for a month to Romania. You know with some velcro and the center gauge cluster I might have a really good dash cam lol
aruesterThread starterGermany · Jun 10, 2011#12Still waiting on part but ordered more.... I have SS brake lines coming. Tanabe Coil Overs and Tanabe Med. Axle over exhaust. Finally a set of NITTO NT NEO GEN 215/40/17s. Received my Pulleys and brake pads today but am waiting for a couple more parts to install all at once. Hoping for next weekend.