Yarisworld Archive

Shifter linkage bushing stuck!

15 posts · 13,638 views

special_k_828Original postToronto, Ontario, Canada · May 16, 2011#1
Hey guys,

Trying to install the "easiest" DIY mod, the NST short shift kit but ran into a problem. The shifter bushing is stuck onto where it mounts on to the original spot. Can't get it off. The cotter pin, washer and linkage are off but the stupid bushing is anchored on there. I have blasted it with liquid wrench and am just waiting right now. It's on there GOOD. I've been prying at it with a screwdriver and applying quite a bit of force but it ain't budging.

help!?

Replies 14

marcustoronto, canada · May 16, 2011#2
try switching gears...
special_k_828Thread starterToronto, Ontario, Canada · May 16, 2011#3
Originally Posted by marcus ↑
try switching gears...
Thanks Marcus.. tried that but no luck. I took off the airbox so I could have more leverage but still, can't get it off. It's really seized on there! Has this ever happened to anybody?
matthewaiunited states · May 16, 2011#4
any lube lying around ?
mazillaSan Jacinto California · May 16, 2011#5
Mine will probably be stuck, when I installed it I had to use a wooden dowel(think plunger handle) and a rubber mallet to pursued it the last 1/3 of the way. I'll be removing mine tonight for a prototype install, if I have the same problem we'll get it worked out in short order.
special_k_828Thread starterToronto, Ontario, Canada · May 16, 2011#6
Originally Posted by mazilla ↑
Mine will probably be stuck, when I installed it I had to use a wooden dowel(think plunger handle) and a rubber mallet to pursued it the last 1/3 of the way. I'll be removing mine tonight for a prototype install, if I have the same problem we'll get it worked out in short order.
Let me know if you come up with any solutions mazilla. I might have to take a drill to mine. haha..
special_k_828Thread starterToronto, Ontario, Canada · May 16, 2011#7
Originally Posted by matthewai ↑
any lube lying around ?
Yeah I drenched it in Liquid Wrench but it's not budging.
marcustoronto, canada · May 16, 2011#8
you sure switching gear wont do.. coz i had the same issue but i think i just moved it to reverse and it came off quick. try all the gears.. thats a moving parts it shouldnt get seized.
Betriventedmonton · May 16, 2011#9
Originally Posted by special_k_828 ↑
Thanks Marcus.. tried that but no luck. I took off the airbox so I could have more leverage but still, can't get it off. It's really seized on there! Has this ever happened to anybody?
I ave the same issue. Mine is literally completely seized onto it. I just gave up.

EDIT: the problem with the design of it, is that if the thign in question gets seized, the whole thing can still pivot inside the rubber in which the linkage sits. The more it seizes, the more it tends to turn inside the rubber instead of on the pivot, which in turn allows for the bushing to seize more by placing less force on it. Vicious cycle.
bobolinkoWas Hawaii - Moved to Everett WA · May 16, 2011#10
Originally Posted by special_k_828 ↑
Hey guys,

Trying to install the "easiest" DIY mod, the NST short shift kit but ran into a problem. The shifter bushing is stuck onto where it mounts on to the original spot. Can't get it off. The cotter pin, washer and linkage are off but the stupid bushing is anchored on there. I have blasted it with liquid wrench and am just waiting right now. It's on there GOOD. I've been prying at it with a screwdriver and applying quite a bit of force but it ain't budging.

help!?
Get yourself some PB Blaster.... That'll get it loosened with no problems...🤘
special_k_828Thread starterToronto, Ontario, Canada · May 16, 2011#11
Originally Posted by Betrivent ↑
I ave the same issue. Mine is literally completely seized onto it. I just gave up.

EDIT: the problem with the design of it, is that if the thign in question gets seized, the whole thing can still pivot inside the rubber in which the linkage sits. The more it seizes, the more it tends to turn inside the rubber instead of on the pivot, which in turn allows for the bushing to seize more by placing less force on it. Vicious cycle.
This is exactly what happened. I'm in the process of trying to cut through the bushing. I'll just try to find a junkyard one or something (if it comes off).
Betriventedmonton · May 16, 2011#12
let me know how that goes, I'd like to get mine working properly as well.. heh
special_k_828Thread starterToronto, Ontario, Canada · May 17, 2011#13
Originally Posted by Betrivent ↑
let me know how that goes, I'd like to get mine working properly as well.. heh
Well finally got everything all installed. Would not say it was smooth at ALL. Ended up having to partially cut a piece of the bushing off. The tool that finally got the brass piece off was a pair of short blade clipper/pliers. I grabbed the two sides of the bushing and used the other piece of the linkage as leverage. That, and having been soaked in liquid wrench for a while, finally freed it.

I then discovered the NST SSK hole was not big enough to slip over the linkage piece with the cotter pin so I had to bore it out a bit with my drill. I put the rubber bushing back into place (so it's actually several pieces at the moment until I have time to go to the junkyard and find another one) and placed it over the SSK piece. Shifts nice. Not that much shorter of a throw though but noticeable.

Here is a pic from a Corolla linkage with the same piece stuck! That brass piece is glued to the rubber bushing. I ended up ripping some of it off so I could get to the brass piece.

Picture lost · www.majhost.com
Betriventedmonton · May 17, 2011#14
Oh wow. Did you document it with pictures? So from what it sounds like you had to cut the rubber piece off? I dunno if I'm willing to do that.
special_k_828Thread starterToronto, Ontario, Canada · May 17, 2011#15
Originally Posted by Betrivent ↑
Oh wow. Did you document it with pictures? So from what it sounds like you had to cut the rubber piece off? I dunno if I'm willing to do that.
No pictures. It's definitely not something I'm proud of. I got it done but by no means was it clean 🤷

Yeah, the rubber had started to come off anyways because I was working at it so much.

In retrospect, I think the clippers/pliers pictured below paired with the Liquid Wrench could have gotten it done without destroying the rubber bushing. Try to get underneath the brass part, if not, clip right onto it, use the linkage as leverage and pry upwards.

Picture lost · www.globalgroupbuy.com