Yarisworld Archive

Extreme Camber Yaris

14 posts · 5,475 views

Replies 13

kimonaHuntington Bch, CA · May 13, 2011#2
What a terrible fitment!
bzinn 1University Place,WA · May 14, 2011#3
Glad I didnt go that far on the offset,but I think his looks pretty nice....maybe a differnt stretch tire would llook better.
david_mackkMelbourne · May 14, 2011#4
Looks like he has the evo style fins on the rear or am I seeing things 😕
Kongo-OttoGermany · May 14, 2011#5
Originally Posted by david_mackk ↑
Looks like he has the evo style fins on the rear or am I seeing things 😕
He needs the vortex generators pretty bad for his non-existent rear spoiler.
advocateThread starterlocation · May 14, 2011#6
Originally Posted by david_mackk ↑
Looks like he has the evo style fins on the rear or am I seeing things 😕
correct.
marcustoronto, canada · May 14, 2011#7
looks hot to me....lol
MUSKOKA800Chatham, Ontario, Canada · May 14, 2011#8
Simply rediculous!
ilikericesavannah, ga · May 14, 2011#9
needs fender flares now...

side note: advocate:
i like your other video about over torqued lug nuts.. hehe
i can see using your rear back seat frame is convenient and hitting the side of your car in the process made me cringe a bit. But who really has the time to take out there rear bench seat?
Just buy a long 3 foot pipe from lowes or home depot and slip it on the wrench.. or buy a breaker bar from harbor frieght.
wildmongoose26Dallas, TX · May 14, 2011#10
That camber honestly isnt even that crazy. I think its a guy on here that has 15x9+0's on there. He is MAYBE running at most 5 degrees? I currently have 3 degree shims on my car and 16x8+0. So its not that crazy though.
ERAany way the wind blows · May 14, 2011#11
mean.
why?harnett county NC · May 15, 2011#12
Originally Posted by ilikerice ↑
needs fender flares now...

side note: advocate:
i like your other video about over torqued lug nuts.. hehe
i can see using your rear back seat frame is convenient and hitting the side of your car in the process made me cringe a bit. But who really has the time to take out there rear bench seat?
Just buy a long 3 foot pipe from lowes or home depot and slip it on the wrench.. or buy a breaker bar from harbor frieght.
wait what? it takes about 5-10 minutes to take the rear seat out if you have any familiarity with tools. It took me about 20 minutes excluding the stripping the last bolt. that took forever finding someone competent enough to remove it, and the dude that did took literally two seconds.
ilikericesavannah, ga · May 16, 2011#13
Originally Posted by why? ↑
wait what? it takes about 5-10 minutes to take the rear seat out if you have any familiarity with tools. It took me about 20 minutes excluding the stripping the last bolt. that took forever finding someone competent enough to remove it, and the dude that did took literally two seconds.
ok, we getting off topic and i apoligize.. but really? u think its easier to pull out your rear seat and use that to break loose 16 over torqued bolts instead of driving to the parts store to pick up the "CORRECT" tool (breaker bar)?
SaggioSeattle WA, · May 24, 2011#14
Looks good!