Yarisworld Archive

Speed needle

16 posts · 7,640 views

jetaimejscOriginal postBville, TN · Apr 29, 2011#1
Ok, so I changed the speedometer color and everything went fine. I put it all back together and put the speed needle back and fixed it to 0 and when I turned the car on it went below 0. Next I tried to take the faceplate off and turn it on and change the below 0 to 0 so it stayed put. I drove a bit and after called it a day. Next morning the needle was back to below 0 so what i did was push it in harder and drove around and it would not move at all. Stuck on 0. Now I loosened it up again and again put it to 0 and later went out to check and again. Below 0. Hope I'm making sense here. Any help would be appreciated. Sorry for typos. Typing from iphone

Replies 15

rl67pinoy808 · Apr 29, 2011#2
U broke it. Lol
jetaimejscThread starterBville, TN · Apr 29, 2011#3
i hope not. Right now its sitting at below 0. So it still moves when i accelerate, just about 10 miles behind
rl67pinoy808 · Apr 29, 2011#4
I hope i can help but thats one of the things i dont mess wid in the car.
Good luck fixin it.
jetaimejscThread starterBville, TN · Apr 29, 2011#5
anyone else?
matthewaiunited states · Apr 29, 2011#6
just put a [-10] behind every number
CTScottUSA, CT · Apr 29, 2011#7
I suggest taking the front cover off, and then adjusting it after turning on the ignition.
jetaimejscThread starterBville, TN · Apr 29, 2011#8
^ Thats exactly what i did. It was below 0 and i took the cover off and turned the car on, moved it to exactly 0 and drove around. Worked perfect. I put the cover back on and got in the car the next morning and it was back to below 0.
CTScottUSA, CT · Apr 29, 2011#9
Originally Posted by jetaimejsc ↑
^ Thats exactly what i did. It was below 0 and i took the cover off and turned the car on, moved it to exactly 0 and drove around. Worked perfect. I put the cover back on and got in the car the next morning and it was back to below 0.
Does it seem like the needle's tube is slipping?
jetaimejscThread starterBville, TN · Apr 29, 2011#10
not really. At first when i moved it, the needle felt loose, but i turned car on and it felt some resistance so i moved it to 0. now i pushed it in more and it never moved up or down, just stuck on 0. So i loosened it up some but after i drive and leave the car it just falls below 0
CTScottUSA, CT · Apr 29, 2011#11
Originally Posted by jetaimejsc ↑
not really. At first when i moved it, the needle felt loose, but i turned car on and it felt some resistance so i moved it to 0. now i pushed it in more and it never moved up or down, just stuck on 0. So i loosened it up some but after i drive and leave the car it just falls below 0
When you adjust it powered-on, you have to pull the needle off and press it back in place. If you rotated it while powered-on, that explains why on the next trip it dropped back below zero. It only recalibrates itself on power-up. If you move the needle once it has already calibrated, you bypass the initial calibration.
jetaimejscThread starterBville, TN · Apr 29, 2011#12
Ok. I'll try that then. Thanks
annnseattle · Apr 29, 2011#13
Originally Posted by CTScott ↑
When you adjust it powered-on, you have to pull the needle off and press it back in place. If you rotated it while powered-on, that explains why on the next trip it dropped back below zero. It only recalibrates itself on power-up. If you move the needle once it has already calibrated, you bypass the initial calibration.
You always have excellent info...fun to read you excellent help info for this member.
jetaimejscThread starterBville, TN · Apr 29, 2011#14
Just got back and it worked, thanks CTScott
GeneralDon7Frederick, MD · Apr 30, 2011#15
I had that same problem when I did my LED change, though mine eventually corrected itself back to 0, but now I have the issue if i accelerate too fast the needle gets stuck at 60.
jetaimejscThread starterBville, TN · Apr 30, 2011#16
mine was getting stuck at around 40ish, i retried what CTScott said and eventually it worked and just kept going to whatever speed i was going without getting stuck