malibuguyOriginal postWestminster, MD · Apr 14, 2011#12" mandrel-bent 409ss tubing from the manifold-back. MBS Performance 100cell Race catalytic converter, 2 Borla resonators & exiting with an Aspec ITB muffler.
Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy http://www.youtube.com/watch?v=QPNziKtxzvUReplies 35
SLIK4Clearwater, Kansas · Apr 14, 2011#2very nice!!! one of the cleanest custom exhaust setups i've ever seen too :)
Jason@SportsCarDebary, FL · Apr 14, 2011#3Nice welds. 👍 I would keep an eye on the bumper, that tips looks a little too close.
malibuguyThread starterWestminster, MD · Apr 14, 2011#4 Originally Posted by
SLIK4 ↑ very nice!!! one of the cleanest custom exhaust setups i've ever seen too :)
thanks...its what i do for a living...i figure i finally have a nice car, so picked a nice little muffler for it that you don't see often
Originally Posted by
Jason@SportsCar ↑ Nice welds. 👍 I would keep an eye on the bumper, that tips looks a little too close.
it looks close, but the rolled edge is actually right where the bumper rolls up...so the closest it gets is just over 5/16" of an inch (my closest gap rule of thumb) right in the middle of the length of the tip
by the way...in the pictures the exhaust is barely a day old...i LOVE the colors an SS exhaust turns into when its sized properly
matthewaiunited states · Apr 15, 2011#5any sound clips? how much did the materials cost ?
malibuguyThread starterWestminster, MD · Apr 15, 2011#6sound clip is posted after the last picture
on the street this would cost you about $550
JTDBT903NE. OHIO · Apr 15, 2011#7Looks and sounds very good! Any better performance?
How about a clip of it taking off down the street?
Why 2 resonators?
I have a stainless muffler that I found at the side of the road that I want to make into a axleback. What kind of connecter is that called over the axle? Do they carry them at the parts store?
matthewaiunited states · Apr 15, 2011#8oh didnt see the link...is the cabin noise loud?
Kaotic LazagnaCentral Valley, CA · Apr 15, 2011#9Best sounding NA 1NZ imo.
Oh, I don't think you'll have to worry about the tip being too close to the bumper. Look how close mine is, and I've had it like this for quite some time now.
Picture not included in this copy
big loLoiza,Puerto Rico · Apr 16, 2011#10^Now that's close, lol. Nice clean job all around, awesome stuff bro
JumpmanYarisSO. INDIANA · Apr 16, 2011#11Looks good
malibuguyThread starterWestminster, MD · Apr 16, 2011#12thanks guys.
this is my daily driver so i did not want it too loud, so thats why i went with 2 resonators...also with my main "muffler" being kinda of small. I drive 500plus miles a week...tho i seem to be racking up more...i've only had the car for about 45-50 days & already have 5600miles on it.
it does have mild drone, but its not too bad...its really only when under load at too low of an rpm...like 5th gear at 30mph up a hill type shit. cruising down the highway it just barely noticeable over the tires (which are at 50psi so they scream a little)
all in all i'm very happy with it & i hope to pick up some gas mileage mainly from the race cat...if it drops...i'll probably sell the exhaust & go back to stock & throw a tip on it or something
Bluevitz-rsOshawa, Ontario, Canada · Apr 17, 2011#13What size pipe did you use, 2"? Let us know if the millage changes due to the new system.
thepartsmancomethmidwest · Apr 17, 2011#14sounds really good! Ive always been so-so on most Yaris exhaust, but your's is the exception. Our Yaris is the wife's car, so no exhaust for it unfortunately.....just gotta save up for MY exhaust lol
Midnight DrifterMonroe, NJ · Apr 17, 2011#15Would the shop that did that Yaris be willing to take on a hatchback? I'd love to have a Megan header and race cat with high-flow exhaust, and that's really some quality work!
malibuguyThread starterWestminster, MD · Apr 18, 2011#16yes i can handle your hatchback no problem
ViperoniBrampton, ON · Apr 19, 2011#17Looks good, I like the sound too!
Ever think of getting a longer first resonator/muffler? That might help break up some of the droning...
malibuguyThread starterWestminster, MD · Apr 20, 2011#18my original plan was to use a HushPower in the middle, but i have a million other things that need money first, so i used what i had...the 2 borlas used to be in a rear section that i had for my scion...i had 3 different rear sections to go with a custom front section
Picture not included in this copy
Picture not included in this copy
the exhaust isn't really that loud, so i'm not going to bother with it for a while
ViperoniBrampton, ON · Apr 20, 2011#19That's a different setup than you have in the video... any vids of that?
I was thinking of doing something very similar in my Echo.
Also, do you have any relatively inexpensive sources for 1.75" v-band flange kits?
SilToYarisQuebec Canada · Apr 21, 2011#20Can we hear that plz?
malibuguyThread starterWestminster, MD · Apr 21, 2011#21 Originally Posted by
Viperoni ↑ That's a different setup than you have in the video... any vids of that?
I was thinking of doing something very similar in my Echo.
Also, do you have any relatively inexpensive sources for 1.75" v-band flange kits?
that was one my scion
i was showing where my resonators came from...& actually they originally came off a 2 week old Borla exhaust for a 350z
i tend to keep stuff thats in good shape (which i why i have 38 mufflers in my shed & 4 next to my toolbox)
jt258HOUSTON · Apr 21, 2011#22Thats a sick set up extremely nice!!!!;0)
why didnt you go with 2.25in wxhaust piping?
Bluevitz-rsOshawa, Ontario, Canada · Apr 21, 2011#23 Originally Posted by
jt258 ↑ Thats a sick set up extremely nice!!!!;0)
why didnt you go with 2.25in wxhaust piping?
You'd start loosing power with an unmodified motor. And by unmodified I mean serious power adders.
malibuguyThread starterWestminster, MD · Apr 22, 2011#242" is a perfect match for these motors to develop a good peak velocity that broadens the torque range
i could by looking @ the pics of how the heat is dispersed, drop down to 1.75" after the first resonator & probably see no difference in power output
matthewaiunited states · Apr 22, 2011#25if i take the stock axle back (for sedan) and cut the last res box out and just weld a pipe where it used to be will it open up the sound a little ? i think i saw some one on here did that is it possible ?
Midnight DrifterMonroe, NJ · Apr 22, 2011#26Well thanks for the heads up man. I got a friend down in Towson near Baltimore with an 86 rolla, when I got the spare change I'll bring down a header and muffler and let you set up a sweet low-restriction 2" exhaust with racing cat, ok? :)
No resonators for me. I like it LOUD. :D
matthewaiunited states · Apr 22, 2011#27 Originally Posted by
malibuguy ↑
i tend to keep stuff thats in good shape (which i why i have 38 mufflers in my shed & 4 next to my toolbox)
any chance youd be making more for sale........
matthewaiunited states · Apr 22, 2011#28 Originally Posted by
Kaotic Lazagna ↑ Best sounding NA 1NZ imo.
Oh, I don't think you'll have to worry about the tip being too close to the bumper. Look how close mine is, and I've had it like this for quite some time now.
Picture not included in this copy
hey is this on a sedan i want to get a dual tip is this welded on cause the end of the oem is angled down so i feel like a dual would only work if it came out straight
malibuguyThread starterWestminster, MD · Apr 23, 2011#29i'm probably going to take off the exhaust & sell it...i only got 49.81 mpg on the last tank...& it should of been a 50-52mpg tank
fuck me
Kaotic LazagnaCentral Valley, CA · Apr 23, 2011#30 Originally Posted by
matthewai ↑ hey is this on a sedan i want to get a dual tip is this welded on cause the end of the oem is angled down so i feel like a dual would only work if it came out straight
Yes, this is on my sedan. If you want to do a center exit tip like mine, you'll need to cut off the rear jack point. Just a heads up.
Kaotic LazagnaCentral Valley, CA · Apr 23, 2011#31 Originally Posted by
malibuguy ↑ i'm probably going to take off the exhaust & sell it...i only got 49.81 mpg on the last tank...& it should of been a 50-52mpg tank
fuck me
How are you averaging 50-52 mpg? I'm only averaging 42 mpg???
matthewaiunited states · Apr 23, 2011#32 Originally Posted by
Kaotic Lazagna ↑ Yes, this is on my sedan. If you want to do a center exit tip like mine, you'll need to cut off the rear jack point. Just a heads up.
ohh i didnt realize it was in the center
Kaotic LazagnaCentral Valley, CA · Apr 24, 2011#33 Originally Posted by
matthewai ↑ ohh i didnt realize it was in the center
hahaha, yeah, I was one of the first to do a center exit exhaust.
malibuguyThread starterWestminster, MD · Apr 24, 2011#34 Originally Posted by
Kaotic Lazagna ↑ How are you averaging 50-52 mpg? I'm only averaging 42 mpg???
i drive a certain way & take a certain route to work to allow me pretty much coast almost the first half of my trip to work ( i have a 45mile commute one way)
so for like the first 15miles i'm on back roads coasting as much as i can & of course keeping speeds down
Picture not included in this copy my current tank is probably going to be low to mid 40s, i've been driving fast & using a/c...since i'm in the middle of some body work on my tercel...i have to take out my speed aggressions on the yaris, lol
malibuguyThread starterWestminster, MD · May 8, 2011#35exhaust is for sale, i'm putting the stock exhaust back on
TrashCan MonsterUnited States · May 20, 2011#36I like how you chose to use a smaller diameter tip. Nice and stealthy