Yarisworld Archive

Fender Flares

33 posts · 19,477 views

YariceOriginal postVictorville, CA · Apr 12, 2011#1
I've been looking online for a while with no luck. Does anybody know of a company that sells fender flares for a yaris HB. I want to run a slighty wider and lower offset wheel.

Replies 32

ilikericesavannah, ga · Apr 12, 2011#2
i think ur will have to settle with the universal flares and have them cut to fit basicly.. i also been looking around and have not found any.. CaliYaris has flares on his and it looks nice.
YariceThread starterVictorville, CA · Apr 12, 2011#3
Yeah I saw Garms, I wouldn't mind thoes either if they work with the stock body without extensive modification.
marcustoronto, canada · Apr 12, 2011#4
sound like a group buy coming...wheres garm?? time to create the fender flares..lol
enviriCT · Apr 12, 2011#5
the fenders found in this

Picture not included in this copy
and
Picture not included in this copy

looks awesome
JerkrattFair Lawn, NJ · Apr 12, 2011#6
where can you find those?
bzinn 1University Place,WA · Apr 12, 2011#7
If I remember correctly Garm used the flares from 1st gen xb....he had the guy make him a set that had 4 fronts as the rear flares on xB have the door cutout in them and dont lok right.

I tried on my buddies CF flares that he had sitting around this winter and they honestly are a near perfect match on the stock body,add body kit and you got a lot of trim work.

Hit up Garm he most likely has a great source for the xB flares.
enviriCT · Apr 12, 2011#8
after a little research it seems Team Autosports Thailand sells CF fenders, they might sell fiberglass/ABS versions too.

Picture not included in this copy
cali yarisCanoga Park, CA · Apr 12, 2011#9
^ I can get those fenders in fiberglass, but they are stock width, no flare built in.

I used all-rear xB fender flares on my car, they work just fine with the stock body. I have two sets in stock.
enviriCT · Apr 12, 2011#10
well that's dumb. lol. a +3mm is small enough to go unnoticed and keep that stock look with that vent!
bzinn 1University Place,WA · Apr 12, 2011#11
Originally Posted by cali yaris ↑
^ I can get those fenders in fiberglass, but they are stock width, no flare built in.

I used all-rear xB fender flares on my car, they work just fine with the stock body. I have two sets in stock.

Garm think you posted wrong..thought those were the fronts you had a doube set made of for the car,cause the rear xB has the door cutout in the flare.

Also you have the vented fenders???????I am interested very interested.
annnseattle · Apr 13, 2011#12
Vented fenders , fiberglass, I am interested !
JerkrattFair Lawn, NJ · Apr 13, 2011#13
if you can get those fenders in carbon fiber consider a set sold
wildmongoose26Dallas, TX · Apr 13, 2011#14
Seriously Jerkratt...check your pm's and i like those CF fenders
Jason@SportsCarDebary, FL · Apr 13, 2011#15
Originally Posted by Yarice ↑
I've been looking online for a while with no luck. Does anybody know of a company that sells fender flares for a yaris HB. I want to run a slighty wider and lower offset wheel.
We used the Racing Lifestyle Miata flares.

Picture not included in this copy
Jason@SportsCarDebary, FL · Apr 13, 2011#16
Originally Posted by cali yaris ↑
^ I can get those fenders in fiberglass, but they are stock width, no flare built in.
Any idea on the weight of the fiberglass fenders?🤤 Carbon would be nice, but only if its the real thing - not the single layer of carbon over fiberglass, resulting in no weight savings. 🙁
TEHxFALLEN V1.2Calabasas, CA · Apr 14, 2011#17
The CF fenders would rock my world. I WANT.
cali yarisCanoga Park, CA · Apr 14, 2011#18
Garm think you posted wrong..thought those were the fronts you had a doube set made of for the car
You're right, my bad.

@ Jason: I bet those carbon ones are not made for weight savings.

I'll ask about having some vented fenders sent with our next shipment.
YariceThread starterVictorville, CA · Apr 14, 2011#19
Im trying to contact Autokonexion to see if we can get a group buy going. There fender flares are the same as the ones from Racing Lifestyle. Check out this link http://www.autokonexion.com/miata-ca...1f3tg2s5siten1. Im planning on getting the fiberglass ones cause there only around $250.
YariceThread starterVictorville, CA · Apr 14, 2011#20
Hey Garm mabe you can get a better deal with these guys.
Jason@SportsCarDebary, FL · Apr 14, 2011#21
Originally Posted by cali yaris ↑
You're right, my bad.

@ Jason: I bet those carbon ones are not made for weight savings.

I'll ask about having some vented fenders sent with our next shipment.
Always seems to be the case. 😠 We got a "carbon" hood for Philips Miata before he sold it... Weighed more than the stock aluminum hood.
cali yarisCanoga Park, CA · Apr 14, 2011#22
Hey Garm mabe you can get a better deal with these guys.
Yes I can.
cali yarisCanoga Park, CA · Apr 14, 2011#23
Both companies contacted. 👍
annnseattle · Apr 14, 2011#24
Yea it funny but I always hear carbon this and that but really unless it's laid 100% with correct materials you not going to have a lightweight item. I go and have been since 1980s down with old school fiberglass mat resin and gelcoat... It can be very light and very strong , oh but carbon LOOKS so racer !! Lol
YariceThread starterVictorville, CA · Apr 14, 2011#25
Originally Posted by cali yaris ↑
Both companies contacted. 👍
Sweet
LA YarisLos Angeles CA · Apr 14, 2011#26
This is the company that is making my CF Fender Flares for the Rear for my Sedan.

American Carbonfiber and Fiberglass (eBay)
americancarbonfiber1 (eBay)
americancarbonfiber@gmail.com
JohnnyBomber101Virginia · Apr 14, 2011#27
Keep us posted on the flares Garm!
TickleTimeTimArkansas · Apr 17, 2011#28
those would be sweet. subscribed.
cali yarisCanoga Park, CA · Apr 18, 2011#29
I have the Miata flares on order now. 👍

This will be a very nice mild flare.
TickleTimeTimArkansas · Apr 18, 2011#30
what price range do you think we will be looking at?
TickleTimeTimArkansas · Apr 24, 2011#31
any eta or prices on the flares?
cali yarisCanoga Park, CA · Apr 24, 2011#32
Slightly less than what they sell them for.
iamrobbyah707 - North Bay - Cali · May 17, 2011#33
Oh sure, back in 08, I eluded to the desire to put flares on and dump the hell outta my hatch, and boy, did I get flamed. Seems like the community is finally coming around to the idea.

Guess I was ahead of the times =p