Looking for after market exhaust that is as quiet as the stock exhaust. No fart actions. Any suggestions?
Super quiet exhaust.
39 posts · 17,052 views
Replies 38
the TRD jdm version s muffler i have is QUIET and looks stock without the big gaudy tip....
"As quiet" means just as restrictive. Even the TRD axle-back is a little louder than stock.
What is your reason for wanting an aftermarket exhaust?
What is your reason for wanting an aftermarket exhaust?
Free up the flow and maybe gain a tiny bit of power. I'll slowly keep on adding performance tid bits over the next year. If I can get 15hp more I'm good but don't want to sound like a wanna be race car.Originally Posted by cali yaris ↑"As quiet" means just as restrictive. Even the TRD axle-back is a little louder than stock.
What is your reason for wanting an aftermarket exhaust?
any aftermarket exhaust will be louder. if you go custom with magnaflow muffler it should be quiet until about 3 grand on the tach and then start getting louder....but it's not loud. it's a nice low sound. it will resonate, but i dont have that exhaust yet so i cant tell you it's resonant rpm range.
http://www.magnaflow.com/02product/streetmufflers.asp
14807 for round tips and 14833 for square tips. these are the mufflers i'll be using with a custom catback pipe. removing the resonator will make it louder, and also a header will make it loud. keep the resonator and go axle back for a quiet exhaust, but it's got more restrictions.
http://www.magnaflow.com/02product/streetmufflers.asp
14807 for round tips and 14833 for square tips. these are the mufflers i'll be using with a custom catback pipe. removing the resonator will make it louder, and also a header will make it loud. keep the resonator and go axle back for a quiet exhaust, but it's got more restrictions.
Nothing is as quiet as the stock exhaust (echo)
i'd have to suggest the muffler i have: Dynomax Super Turbo muffler. If you plan on keeping your cats, then this thing would be perfect.
Free up the flow and maybe gain a tiny bit of power.You can't free up the flow AND have it as quiet at stock.
If I can get 15hp more I'm good but don't want to sound like a wanna be race car.You won't; maybe 5 at best.
Originally Posted by cali yaris ↑You can't free up the flow AND have it as quiet at stock.
You won't; maybe 5 at best.
You could mimick the stock multi-pass set up by using two or three high performance mufflers. I'm not sure how many mufflers you can cram in the stock location, but going through three large diameter turbo mufflers might be pretty quiet. Rearward through the first, forward through the second, rearward through the third.
Even the TRD Exhaust system is loud.
I am looking for something similar, but I want it to be just a hair louder than stock. I had a random turbo muffler on a civic and liked the way it sounded, just the slightest bit of increase in sound and no resonance...I'm just not sure it will be exactly the same on the Yaris so i haven't pulled the trigger.
I love my Tanabe Touring Medalion. Just the right amount of pep when I'm accelerating and stays nice and quiet when I'm not.
While I agree with this statement, some aftermarket exhausts do get closer to others as far as volume levels. I've read that the Fujitsubo Wagolis is a good example of the quieter sort... also listened to a couple of youtubes.Originally Posted by cali yaris ↑"As quiet" means just as restrictive.
^ Well sure, but the guy said:
Looking for after market exhaust that is as quiet as the stock exhaust.Plus the +15 hp. Sorry, but no.
The TRD exhaust I have is louder than the stock unit, it can be annoying any takes a while to get used to. Trust me.
BUT it looks great and is real sturdy so it won't rot out after a few snowy seasons....
I switched back to the stock muffler once to see the difference and man, that stock setup is real QUIET..... If you can't deal with any extra noise, then stay stock.
BUT it looks great and is real sturdy so it won't rot out after a few snowy seasons....
I switched back to the stock muffler once to see the difference and man, that stock setup is real QUIET..... If you can't deal with any extra noise, then stay stock.
Well should have said 15hp with other upgrades not just the exhaust. I'm ok with some noise at 5K RPM as I don't think you can do much about that at those rpm's.Originally Posted by cali yaris ↑^ Well sure, but the guy said:
Plus the +15 hp. Sorry, but no.
My 74 BMW 2002 would be at 5K at 100 k/h+ and with two glass packs it wasn't too bad but in town it was too loud for my liking and I efin hate fart can sounding exhausts, just seem ridiculous to have to listen so much noise in an econo box.
I'll check out the TRD jdm one out.
Thanks.
^^ BAD NEWS on that end seeing as its around 700 bucks now with the conversion. When i bought mine back in 08 when toyota still had stock of them in the US i paid 400.
the USDM trd exhaust is 3 times louder than this jdm one and it doesn't have that coffee can look!
the USDM trd exhaust is 3 times louder than this jdm one and it doesn't have that coffee can look!
i have the hk and sometimes it cancels out some bass and low mid tones when listening to music. so will any after market axle back do that? i put a big pillow in the trunk up against the back seats i still dont know if 'muffling' the mufflerOriginally Posted by auxmike ↑The TRD exhaust I have is louder than the stock unit, it can be annoying any takes a while to get used to. Trust me.
BUT it looks great and is real sturdy so it won't rot out after a few snowy seasons....
I switched back to the stock muffler once to see the difference and man, that stock setup is real QUIET..... If you can't deal with any extra noise, then stay stock.
yeah and hopefully next winter is as good as this last one !!!
just get a good one like magnaflow or borla. they use chambers to cancel noise, not baffles like stock.
I can say I've heard the fujitsobu (or however its spelled) and I've owned the tanabe medallion touring for a few thousand miles, and both of them are a deep, relatively quiet tone.
Not quiet as stock, but not fart cans at all! And you can always cut the super douche-bag tip off, I know I did!
Not quiet as stock, but not fart cans at all! And you can always cut the super douche-bag tip off, I know I did!
i own a fujitsubo and its very quiet. I really have to floor it at low rpm to hear something. After 4k rpm the engine noise takes over. im happy with it.
**i have the fujitsubo for the Vitz RS. It sits higher it will rub against the stock USDM bumper, so i think you might have to get the fujitsubo for the 1.3L, since the bumpers for US and their lower grade sits at the same height.
Picture not included in this copy
^fujitsubo RS muffler rubbing against USDM bumper
**i have the fujitsubo for the Vitz RS. It sits higher it will rub against the stock USDM bumper, so i think you might have to get the fujitsubo for the 1.3L, since the bumpers for US and their lower grade sits at the same height.
Picture not included in this copy
^fujitsubo RS muffler rubbing against USDM bumper
i agree with peter! i am running a dynomax 2" cat-back with 2 1/2" tip looks stock and not to loud. also running a meagan header!Originally Posted by PETERPOOP ↑i'd have to suggest the muffler i have: Dynomax Super Turbo muffler. If you plan on keeping your cats, then this thing would be perfect.
so this one fits the 2010 sedan ? and still get a louder sound then the stock sewing machine sound ?Originally Posted by 20104dr ↑i agree with peter! i am running a dynomax 2" cat-back with 2 1/2" tip looks stock and not to loud. also running a meagan header!
its a universal muffler, so u need to have the shop bend the 2" pipe cat back and do some manuvering of muffler to fit. but i got it to work. actually my muffler is a 2 1/4" in n out. the guy a muffler shop told me that 2 1/4" was to big lossing too much backpressure. i say if u want a lil better flow get a bigger than stock universal replacement muffler with piping!!Originally Posted by matthewai ↑so this one fits the 2010 sedan ? and still get a louder sound then the stock sewing machine sound ?
okay i see im not sure if i want to do any alterations to the stock piping but i will look into it . i mainly just want an axle back thats not as loud as the hk that just bolts on like the magnaflow or borla do either of these fit the sedan ? they seem like they arent as loud and thats exaggly what i would want
Fujitsubo makes fantastic exhausts!
You want more flow, but quieter? Just have two resonators installed along the exhaust path.
You want more flow, but quieter? Just have two resonators installed along the exhaust path.
I think my intake is louder than my exhaust, it really the only reason y i put the exhaust on!Originally Posted by matthewai ↑okay i see im not sure if i want to do any alterations to the stock piping but i will look into it . i mainly just want an axle back thats not as loud as the hk that just bolts on like the magnaflow or borla do either of these fit the sedan ? they seem like they arent as loud and thats exaggly what i would want
Totally, my intake is all I can hear right now. hahaOriginally Posted by 20104dr ↑I think my intake is louder than my exhaust, it really the only reason y i put the exhaust on!
+1. Good sounding exhaust without being too loud with a nice, deep tone. Built like a brick outhouse, too.Originally Posted by Freedan ↑I love my Tanabe Touring Medalion. Just the right amount of pep when I'm accelerating and stays nice and quiet when I'm not.
The Youtube of the tanabe sounds really nice not so tin canney. They have one of the Borla that sounded good to but im having a little trouble finding someone who sells it. Ilike the duel tip.
Anybody know if one of those Ebay twin loops will fit in a hatchback? The measurements are too big, but I don't know if they are counting the tip(which can be modified).
http://cgi.ebay.com/ebaymotors/UNIVE...mZ280659647436
http://cgi.ebay.com/ebaymotors/UNIVE...mZ280659647436
Picture not included in this copyOriginally Posted by mazilla ↑Anybody know if one of those Ebay twin loops will fit in a hatchback? The measurements are too big, but I don't know if they are counting the tip(which can be modified).
http://cgi.ebay.com/ebaymotors/UNIVE...mZ280659647436
jk, that's an interesting looking muffler! reminds me of a trumpet...
It's the same basic design(twin loop) as the OEM muffler...they are funny looking for sure, first car I've had with one.Originally Posted by TrashCan Monster ↑
jk, that's an interesting looking muffler! reminds me of a trumpet...
Here's an IDEA:
Get Any Muffler of your Choice.....
Tell your Exhaust installer to remove your CAT....
Wield 2 Cherrybomb/Glass pack Silencer ......
Thus your midpipe should have 3 Silencer (inclusive of your stock one)
Voilà .... Silent as the night.....
Get Any Muffler of your Choice.....
Tell your Exhaust installer to remove your CAT....
Wield 2 Cherrybomb/Glass pack Silencer ......
Thus your midpipe should have 3 Silencer (inclusive of your stock one)
Voilà .... Silent as the night.....
i just put a 2 inch pipe on a stock flange and ran over the axle to a 2 inch Cherry Bomb turbo. it has an offset so the tip is in the stock location and it all looks stock ."in case the law has a problem with that stuff". it is just a bit louder than stock with no load, some what louder under load. nice sound , no popping or racking off. a noticeable increase in power . muffler $24 at Auto Zone , pipe bent ,muffler mounted and tip at local muff shop. $44. (total $66)
it ain't stainless , but I'll change it in a year or so anyway! :)
it ain't stainless , but I'll change it in a year or so anyway! :)
Was idly surfing the 'net and a thought (from the days of yore before HKS landed on these shores) occurred to me: For the people who say even the Medalion Touring or TRD mufflers are too noisy, has anyone tried or heard of anyone trying to cut the tip off and welding on a Supertrapp muffler/tip? They have an 8" shorty muffler which would fit on the Medalion and be the thrid resonator. Or, how about those Monza dual muffler tips (ugh, crap quality though)?
If not, mebbe I could try it. Just a thought...
If not, mebbe I could try it. Just a thought...
im gonna try a 24x6 resonator and the biggest magnaflow straight through oem looking muffler that we can stuff in the echo. we want the flow to help boost but quiet as possible. it will still have added noise over stock but we want to keep the rear end as stock looking as possible.
thats my idea atleast.
thats my idea atleast.
use a Dynomax VT & be happy
The Prius have quiet exhaust.