Yarisworld Archive

H4 Relay Installation

72 posts · 25,586 views · page 2 of 2

Replies continued

EjDaPogiThread starterAl-Khobar, KSA · Apr 4, 2011#53
Originally Posted by xtremist ↑
wala ka sa hulog, ikaw may tanong, ikaw din may sagot...wahahahaha
Originally Posted by jonimac ↑
Bwisett! sige basahin mo!😆😆😆
@joni/jeff, sinipag akong mag-google eh! ngakngakngak! 😆

HID (xenon) light sources

HID stands for high-intensity discharge, a term referring to the electric arc that produces the light. The high intensity of the arc comes from metallic salts that are vapourised within the arc chamber. These lamps are formally known as gas-discharge burners, and produce more light for a given level of power consumption than ordinary tungsten and tungsten-halogen bulbs. Because of the increased amounts of light available from HID burners relative to halogen bulbs, HID headlamps producing a given beam pattern can be made smaller than halogen headlamps producing a comparable beam pattern. Alternatively, the larger size can be retained, in which case the xenon headlamp can produce a more robust beam pattern.

Automotive HID lamps are commonly called "xenon headlamps", though they are actually metal halide lamps that contain xenon gas. The xenon gas allows the lamps to produce minimally adequate light immediately upon powerup, and accelerates the lamps' run-up time. If argon were used instead, as is commonly done in street lights and other stationary metal halide lamp applications, it would take several minutes for the lamps to reach their full output. The light from HID headlamps exhibits a distinct bluish tint when compared with tungsten-filament headlamps.

Picture not included in this copy


[edit] Projector (polyellipsoidal) lamps

In this system a filament is located at one focus of an ellipsoidal reflector and has a condenser lens at the front of the lamp. A shade is located at the image plane, between the reflector and lens, and the projection of the top edge of this shade provides the low-beam cutoff. The shape of the shade edge, and its exact position in the optical system, determines the shape and sharpness of the cutoff.[17] The shade may have a solenoid actuated pivot to provide both low and high beam – the shade is removed from the light path to create high beam, and placed in the light path to create low beam, and such optics are known as BiXenon or BiHalogen projectors, depending on the light source used. If there is no such arrangement, the cutoff shade is fixed in the light path, in which case separate high-beam lamps are required. The condenser lens may have slight fresnel rings or other surface treatments to reduce cutoff sharpness. Recent condenser lenses incorporate optical features specifically designed to direct some light upward towards the locations of retroreflective overhead road signs.

Hella introduced ellipsoidal optics for acetylene headlamps in 1911, but following the electrification of vehicle lighting, this optical technique wasn't used for many decades. The first modern polyellipsoidal (projector) automotive lamp was the Super-Lite, an auxiliary headlamp produced in a joint venture between Chrysler Corporation and Sylvania and optionally installed in 1969 and 1970 full-size Dodge automobiles. It used an 85 watt transverse-filament tungsten-halogen bulb and was intended as a mid-beam, to extend the reach of the low beams during turnpike travel when low beams alone were inadequate but high beams would produce excessive glare.[24]

Projector main headlamps first appeared in 1981 on the Audi Quartz, the Quattro-based concept car designed by Pininfarina for Geneva Auto Salon.[citation needed] Developed more or less simultaneously in Germany by Hella and Bosch and in France by Cibié, the projector low beam permitted accurate beam focus and a much smaller-diameter optical package, though a much deeper one, for any given beam output. The version of the 1986 BMW 7 Series sold outside North America was the first volume-production auto to use polyellipsoidal low beam headlamps.

Picture not included in this copy

Picture not included in this copy
ricepowerSaudi Arabia · Apr 4, 2011#54
@kiel, @joni

ilang Kelvin ung xenon nyo? 4300K or 6000K?

pag nasa 6000K masakit na sa mata ng sinusundan mo :(
kiel12al-khobar saudi arabia · Apr 4, 2011#55
Originally Posted by ricepower ↑
@kiel, @joni

ilang Kelvin ung xenon nyo? 4300K or 6000K?

pag nasa 6000K masakit na sa mata ng sinusundan mo :(
pre yung Kelvin nung HID ko 8000k,
jonimacKSA · Apr 4, 2011#56
Originally Posted by ricepower ↑
@kiel, @joni

ilang Kelvin ung xenon nyo? 4300K or 6000K?

pag nasa 6000K masakit na sa mata ng sinusundan mo :(
6000Kelvin
EjDaPogiThread starterAl-Khobar, KSA · Apr 4, 2011#57
Originally Posted by ricepower ↑
@kiel, @joni

ilang Kelvin ung xenon nyo? 4300K or 6000K?

pag nasa 6000K masakit na sa mata ng sinusundan mo :(
Ung nakalagay sa amin Plasma Xenon Bulbs.
H4 - 12V - 1260 - 1200W P43T
Ung 1260, Kelvin kaya iyon?
EjDaPogiThread starterAl-Khobar, KSA · Apr 4, 2011#58
Originally Posted by jonimac ↑
6000Kelvin
@joni, kelan ka pa nagpa-HID?
jonimacKSA · Apr 4, 2011#59
Originally Posted by EjDaPogi ↑
@joni, kelan ka pa nagpa-HID?
@jo, last year pa, bago pa mag 1st grandmeet. Mag one year na rin, okay pa till now.😉
ricepowerSaudi Arabia · Apr 4, 2011#60
@joni, anong ballast na ginamit nyo? Nagdagdag pa ba kau ng relay+harness?
EjDaPogiThread starterAl-Khobar, KSA · Apr 4, 2011#61
Originally Posted by jonimac ↑
@jo, last year pa, bago pa mag 1st grandmeet. Mag one year na rin, okay pa till now.😉
@joni, hindi ko yata napansin! toink! 😢
xtremistal khobar, KSA · Apr 4, 2011#62
Originally Posted by EjDaPogi ↑
@joni, hindi ko yata napansin! toink! 😢
Jo, nung 1st meet, naka HID na si Joni at si Pao.
EjDaPogiThread starterAl-Khobar, KSA · Apr 4, 2011#63
Originally Posted by xtremist ↑
Jo, nung 1st meet, naka HID na si Joni at si Pao.
ganon ba? natanong mo ba kung magkano score nila sa mga HIDs nila?
jonimacKSA · Apr 4, 2011#64
Originally Posted by ricepower ↑
@joni, anong ballast na ginamit nyo? Nagdagdag pa ba kau ng relay+harness?
@gilbert, PHILLIPS yung brand HID conversion kit. plug n play sya, wala ng relay na nilagay. Merong ibang brand mas mahal nga lang.😉
ricepowerSaudi Arabia · Apr 5, 2011#65
Originally Posted by jonimac ↑
@gilbert, PHILLIPS yung brand HID conversion kit. plug n play sya, wala ng relay na nilagay. Merong ibang brand mas mahal nga lang.😉
Ang problema is ang dami ng japeyk na philips sa market 🙁
roscoriyadh,saudi arabia · Apr 13, 2011#66
Link to a thread or page that is not in the archive
xtremistal khobar, KSA · Apr 14, 2011#67
Originally Posted by rosco ↑
Link to a thread or page that is not in the archive
@rosco, pre ano to? sira ung link eh.
roscoriyadh,saudi arabia · Apr 14, 2011#68
Originally Posted by xtremist ↑
@rosco, pre ano to? sira ung link eh.

High & low beam headlamp
9003
9003ST Silverstar High Performance Lighting: The Whiter and Brighter Halogen
9003XV XtraVision Halogen Upgrade: Up to 30% Brighter
9003CB Cool Blue Halogen Upgrade: White Hot; Super Cool; 100% Street Legal

Parking light
7443

Front turn signal
7443

Rear turn signal
992 (7440A)

Tail light
7443

Stop light
7443

High mount stop light
921
921LL Long Life Upgrade: Up to twice the life of the standard lamp

Fog/Driving light
H11-55W

License plate
2825

Back up light
921
921LL Long Life Upgrade: Up to twice the life of the standard lamp

Front sidemarker
2825

Rear sidemarker
7443

Map light
DE3175

Dome light
DE3175

Trunk/Cargo area
DE3022
ricepowerSaudi Arabia · Apr 23, 2011#69
may nabibili ba sa market na horn relay harness?
roscoriyadh,saudi arabia · Apr 23, 2011#70
Originally Posted by ricepower ↑
may nabibili ba sa market na horn relay harness?
ask ko sa obthany si kabayan...kasi may mga loose set sila na ibinebenta na .....
ricepowerSaudi Arabia · Apr 23, 2011#71
Originally Posted by rosco ↑
ask ko sa obthany si kabayan...kasi may mga loose set sila na ibinebenta na .....
umiinit kasi ung oem horn wire at the same pumuputok ung 10A fuse nung nag upgrade ako ng horn..Ayoko nman i-upgrade ung fuse ng horn baka lalong masira ung horn switch + integration relay.
roscoriyadh,saudi arabia · Apr 23, 2011#72
Originally Posted by ricepower ↑
umiinit kasi ung oem horn wire at the same pumuputok ung 10A fuse nung nag upgrade ako ng horn..Ayoko nman i-upgrade ung fuse ng horn baka lalong masira ung horn switch + integration relay.
ah ok...cge ask ko mamaya..kasi pupunta rin me batha kunin ko decals ni rj at ni kiel...wala pala ako number ni ka jun ng obthany e....twagan ko sana e....
ask na rin me ng SUV bullbar.