Yarisworld Archive

Sedan K Sport Coilover Install **PICS**

41 posts · 19,282 views

lkevOriginal postOahu, Hawaii · Mar 28, 2011#1
I was searching through the net for days and didn't really find any info
on the KSports going on the sedan, so for the people out there just like me
heres some pics from my install this weekend.

Morning shot of my baby in front of Garage Js4Kix here in Honolulu
Picture not included in this copy

Wheel gaps
Picture not included in this copy

Picture not included in this copy

Took off the wipers, plastic (three pins) and water squirter hose
Picture not included in this copy

Remove the top bolt and cup
Picture not included in this copy

Remove the strut, brake mount, and tie rod bolts
Picture not included in this copy

Used a spring clamp (not pictured) to hold the OEM spring to take off
a few parts (bearing, rubber stopper, top nut)
Picture not included in this copy

Heres the boss lady of the shop, getting dirty starting on the back
Picture not included in this copy

To get to the top of the back strut was a bitch. Had to remove the plastics.
Pictured below is a guide with a rubber washer attached. The K Sport
threads aren't long enough to go through so I just cut it and added a metal
washer
Picture not included in this copy

Heres an end of the day shot of shop owner Gary priming my custom splitter
Picture not included in this copy


Words of wisdom, adjust heights before bolting things in, make things tight.

Finish pictures to come

Replies 40

Bluevitz-rsOshawa, Ontario, Canada · Mar 28, 2011#2
I love pictures!!🎉
derickveliz2Central, MA · Mar 28, 2011#3
subscribed


D.
lkevThread starterOahu, Hawaii · Mar 29, 2011#4
For a ride description, the ride isn't as stiff as I thought it would be. The springs settled in the rear about a 1/2 inch after a couple times around the block, so I had to take off the rear tires/springs to adjust the ride height.
I had my reservations about spending the money for the coilover setup instead of springs, but after I was able to adjust the ride height I realized the choice was worth it.
TaiyakiHonolulu, HI · Mar 29, 2011#5
Nice! Js4Kix is one of the best places in Hawaii! Only place a trust with my car!
ilikericesavannah, ga · Mar 29, 2011#6
but after I was able to adjust the ride height I realized the choice was worth it.
yes it was
kingbobby83East Texas (Longview) · Mar 29, 2011#7
Got any after pics?
big loLoiza,Puerto Rico · Mar 30, 2011#8
Sweet man, now for some after pics
Flipper_1938Kentucky · Mar 30, 2011#9
Originally Posted by big lo ↑
Sweet man, now for some after pics
and better pics of the female mechanic 🙂
ShinareOklahoma City, OK · Mar 30, 2011#10
Originally Posted by Flipper_1938 ↑
and better pics of the female mechanic 🙂
Hear hear!

👏
lkevThread starterOahu, Hawaii · Mar 30, 2011#11
going back to the shop on saturday so ill have some after pics of the car, as for the after pics of the girl, not too sure what I can do on that lol
matthewaiunited states · Mar 31, 2011#12
sweet brah

seems like a brah,....brah you an icehead brah

get pictures of the dog the big bad dog and his crew brah
lkevThread starterOahu, Hawaii · Mar 31, 2011#13
hahaha, you should be banned for dropping Dog T.B.H references on here. That foo gets no love over here
matthewaiunited states · Mar 31, 2011#14
yeah i can imagine that was the first and last time i will talk about those wackos
Flipper_1938Kentucky · Apr 10, 2011#15
So, where are the "after" pictures?
big loLoiza,Puerto Rico · Apr 10, 2011#16
I agree where the after pics buddy
lkevThread starterOahu, Hawaii · Apr 10, 2011#17
Here goes. I have at least another 1.5 inches to go down. Right now I have it at a height to where I can get out of my driveway safely. There is camber now in the front which makes it interesting to turn when the road is wet.
Full sound deadening next week. XXR rims coming next month.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
Flipper_1938Kentucky · Apr 11, 2011#18
Looks good!
JTDBT903NE. OHIO · May 15, 2011#19
Can't wait to see that splitter.
lkevThread starterOahu, Hawaii · May 17, 2011#20
Me too! I cant put it on right now cuz my car is too low :( i may have to sell it. The best thing about it is it lines up to the factory holes, hate to see it go.
JumpmanYarisSO. INDIANA · May 17, 2011#21
Explain to me what you call interesting.

I am slammed on Megan Coilovers and with camber as well I just curious to see if you are experiencing what I am. Send me a pm if you want.
lkevThread starterOahu, Hawaii · May 20, 2011#22
When I turn on wet surfaces the front wheels kick a little. Especially over manhole covers when they are wet. Also there's an oil spot in my parking garage I have to pass over everyday, when my wheels are turned when I go over it they kick a little. Its a little hard to explain, it feels a small kine dangerous sometimes.
JumpmanYarisSO. INDIANA · May 20, 2011#23
Originally Posted by lkev ↑
When I turn on wet surfaces the front wheels kick a little. Especially over manhole covers when they are wet. Also there's an oil spot in my parking garage I have to pass over everyday, when my wheels are turned when I go over it they kick a little. Its a little hard to explain, it feels a small kine dangerous sometimes.
Does it feel like it would slide over or skid over on wet roads or highways?
JumpmanYarisSO. INDIANA · May 20, 2011#24
Check very often ur tread on the tires for some reason they are wearing faster not like it should
derickveliz2Central, MA · May 21, 2011#25
Originally Posted by JumpmanYaris ↑
Check very often ur tread on the tires for some reason they are wearing faster not like it should
When Camber is applied to the rear wheels, the geometry of the suspension causes the tires to wear very FAST! I've been there and it's not nice, also as they wear more and more, road noise increases due to the fact of uneven wear.

Check your tires and see carefully, pass your hand against the thread in both directions if in one direction feels like the thread holds your hand then you know it's wearing because of the Camber.

See the camber on the rear wheels? I found out when I switch to winter tires, 4K miles and the tires got really bad (snow tires have softer compound). After this I had to remove my camber kit... )o: and now after 8K miles there is no crazy uneven wear.

D.

Picture not included in this copy
JumpmanYarisSO. INDIANA · May 21, 2011#26
Originally Posted by derickveliz2 ↑
When Camber is applied to the rear wheels, the geometry of the suspension causes the tires to wear very FAST! I've been there and it's not nice, also as they wear more and more, road noise increases due to the fact of uneven wear.

Check your tires and see carefully, pass your hand against the thread in both directions if in one direction feels like the thread holds your hand then you know it's wearing because of the Camber.

See the camber on the rear wheels? I found out when I switch to winter tires, 4K miles and the tires got really bad (snow tires have softer compound). After this I had to remove my camber kit... )o: and now after 8K miles there is no crazy uneven wear.

D.
WE only have camber in front and I know how it wears when u have it, its nothing like it ill take a pic of my 17" I got so u can see em how it left them
lkevThread starterOahu, Hawaii · May 23, 2011#27
I had the skidding experience for the first time ever this weekend and it scared the shit out of me. It was raining and the car was pulling hard to the left and i was sandwiched in between two cops too! The pavement switches up here from gravel to this slick white
concrete on overpasses.

As far as the camber wear im not too worried about that. In the last year I only put
around 1,500 miles on my car :) I will have slight camber on the rear next month as I switch over to XXR 521's
alfredyeezLost Satellite Signal · Jul 15, 2011#28
Ikev,

From what you've described, you've over-lowered your car and it's under-steering more now and also suffering from bump-steer.

Take a look under the car and I am quite certain that the front lower suspension arms are now pointing upwards towards the wheel side ie both your lower front suspension arms now forms a 'V' shape from the centre of your car pointing upwards towards the wheels.

The car's suspension and steering geometry has changed after you lowered the car this much..... you are getting more understeer and suffering from bump steer as well. Both not good especially in the wet.
lkevThread starterOahu, Hawaii · Jul 15, 2011#29
I have "Toe In". If it was on a female I would love it :), gotta see an alignment guy soon. My tires are getting bolohead already
TRD.RiCOttawa, Canada · Jul 15, 2011#30
i run 2.4camber at front.... not THAT much difference. toe is set to 0. its a huge misunderstanding from a lot of ppl

Toe will go through your tires like they are butter. camber wont. Yes on the whole life of the tire its going to make a difference. Its not going to make a side bold and have 6/32 on the other side. neway just do your tire rotation and its going to be "almost" even wear
lkevThread starterOahu, Hawaii · Aug 25, 2011#31
Not the best shot but here's an updated pic taken tonight. Went a little too low with it, gotta do some banging and shaping tomorrow.
Sitting on 195/50/16 Stance Emotions and not rollin anywhere

Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Aug 25, 2011#32
I need to change my boxers now!

lol
lkevThread starterOahu, Hawaii · Aug 25, 2011#33
Gotta show love for the sedans. Wanted to go for a little challenge with the 16x8 tucked.
Might have to look into some camber shims for the rear.
Kaotic LazagnaCentral Valley, CA · Aug 25, 2011#34
Not sure if you said this already, but have you rolled your fenders? What's the offset on those rims?
lkevThread starterOahu, Hawaii · Aug 25, 2011#35
Fenders are rolled. Offset is +26.
Kaotic LazagnaCentral Valley, CA · Aug 25, 2011#36
oh, hmmm, slight fender pull then?
JumpmanYarisSO. INDIANA · Aug 25, 2011#37
Told you about the tires lol

Looks nice now some kind of lip kit all around
lkevThread starterOahu, Hawaii · Aug 25, 2011#38
Originally Posted by Kaotic Lazagna ↑
oh, hmmm, slight fender pull then?
Hopefully it goes well but ill be shaping the metal and plastic today.
Kaotic LazagnaCentral Valley, CA · Aug 25, 2011#39
Once you pull the fenders, you should be good. Take pics of the process for us. :)
lkevThread starterOahu, Hawaii · Aug 26, 2011#40
Finished! So many jack ups, adjust, hammer, heat, repeat, but it was worth it. Minor rubs with bumps in the road but other than that its awesome. Now looking into ordering some camber shims or washers for the rear. Also need to buy adjustable sway bar links anyone know where I can find some?

I'll throw up some pics in the morning.
lkevThread starterOahu, Hawaii · Aug 26, 2011#41
Original fitment on front, bird shit not included
Picture not included in this copy

(Rear)Had to use the heat gun on this part where the bumper meets the metal panel. Bent the bumper
plastic out just slightly.
Picture not included in this copy

(Rear)Didn't roll the fenders far down enough in , so without the roller i had to do some pounding.
Picture not included in this copy

(Rear)Now I have 89% full finger gap between tire and well to accomodate for travel
Picture not included in this copy

final, gotta get a better pic. Camera died
Picture not included in this copy


For the front I had to heat gun the fender liner a bit and roll some parts of the metal.
The one problem spot is where the bumper connects to the frame with a screw.
That is a fixed part of the car and cant be bended or shaped. I kind of had to do my own
reshaping there and actually took out the screw for now. Gonna just zip tie it.
The front wheels are at the most camber the Ksports allow