thebarberOriginal postGrand Rapids, MI · Mar 27, 2011#1what is the size of nut used for the tensioner pulley on the blitz s/c?
long story short, the nut came off today and i'm having trouble finding the right size
Replies 4
MUSKOKA800Chatham, Ontario, Canada · Mar 27, 2011#2The nut in the centre of the pulley?
Just happen to have a box full of Blitz 10' from here.
As best I can measure assembled the threaded stud/axle is 10mm with the wrench size for the nut being 14mm.
Hope that helps.
Bluevitz-rsOshawa, Ontario, Canada · Mar 28, 2011#3Did you break it already? LOL
thebarberThread starterGrand Rapids, MI · Mar 28, 2011#4 Originally Posted by
Bluevitz-rs ↑ Did you break it already? LOL
not broken, im just missing a part now, lol
thanks for the info, muskoka
thebarberThread starterGrand Rapids, MI · Mar 28, 2011#5ok, so i was also missing the spacer...
and after about a half dozen trips to the parts source (which is luckily right around the corner from my house) i got some 12mm washers for spacers (x5) a 12mm lock washer on the back and a 10mm 1.25 thread flanged nut w/ a 10mm lock nut on the front
its all back together and is running well, though i havent driven it. just idle in the driveway w/ a couple throttle blips to make sure the s/c was running...