Yarisworld Archive

HELP!!! s/c installed, but a couple of issues

18 posts · 5,445 views

thebarberOriginal postGrand Rapids, MI · Mar 16, 2011#1
issue #1, brakes arent working....is there something i forgot to plug in? its dark now, so i can't really look until the morning

issue #2, i couldnt find the vacuum line to plug into the firewall side of the blitz intake pipe. i just assumed it was for a/c, which i don't have, so i put a rubber cap on it


any ideas?! the car seems to run fine, though completely gutless since i don't have the blitz piggyback installed

Replies 17

CTScottUSA, CT · Mar 16, 2011#2
A/C doesn't have any connections to the vacuum lines. They go to the throttle body, brake booster, PCV and intake manifold.
thebarberThread starterGrand Rapids, MI · Mar 16, 2011#3
ya, the guys on MI say its the vacuum line i couldnt find

car is gutless, btw, cydjedydyeydh
thebarberThread starterGrand Rapids, MI · Mar 16, 2011#4
its staypufts, PM sent

and for cydjedejjdjjjjjededd, the piggyback isnt wired....so the s/c doesnt give me any boost (as the pulley is clutched on the blitz)
Bluevitz-rsOshawa, Ontario, Canada · Mar 16, 2011#5
FINALLY!!!! LOL
MUSKOKA800Chatham, Ontario, Canada · Mar 18, 2011#6
Get it sorted Adam ... because mines in transit as I type.
WeeYariGeorgetown, Ontario, Canada · Mar 18, 2011#7
^ he does have it figured out. Install, sans wiring is complete. He should be wiring this weekend.

We've also learned a couple of tricks that will certainly help you out when the time comes.
thebarberThread starterGrand Rapids, MI · Mar 18, 2011#8
should be going to echo's sunday morning to wire in the piggyback

car made it to toronto and back this evening w/o boost or the ecu
Bluevitz-rsOshawa, Ontario, Canada · Mar 21, 2011#9
^ so did you get it all worked out?
thebarberThread starterGrand Rapids, MI · Mar 21, 2011#10
Originally Posted by Bluevitz-rs ↑
^ so did you get it all worked out?
yessir

boosting as of ~3pm yesterday

couldnt have done it w/ out the steve's
MUSKOKA800Chatham, Ontario, Canada · Mar 21, 2011#11
Commit those details to memory gentlemen.
WeeYariGeorgetown, Ontario, Canada · Mar 21, 2011#12
^ What's the tracking# status on yours?
MUSKOKA800Chatham, Ontario, Canada · Mar 23, 2011#13
Originally Posted by WeeYari ↑
^ What's the tracking# status on yours?
It's sitting in my basement. Arrived Monday. The DC header in the shed. NST pulley inbound via USPS.

Crazy busy with school and racquetball tournaments until May. Then it's time to spin some wrenches.
thebarberThread starterGrand Rapids, MI · Mar 24, 2011#14
Originally Posted by MUSKOKA800 ↑
It's sitting in my basement. Arrived Monday. The DC header in the shed. NST pulley inbound via USPS.

Crazy busy with school and racquetball tournaments until May. Then it's time to spin some wrenches.
thats quite the mod list for the spring, pete!
WeeYariGeorgetown, Ontario, Canada · Mar 24, 2011#15
Originally Posted by MUSKOKA800 ↑
until May. Then it's time to spin some wrenches.
I'll be laid up. 🙁
thebarberThread starterGrand Rapids, MI · Mar 24, 2011#16
ill to help if i can make the time...baby #2 coming start of june....could be early
MUSKOKA800Chatham, Ontario, Canada · Mar 31, 2011#17
I might just sneak the pulley and header on some Sunday soon. Free time and weather permitting.

Originally Posted by thebarber ↑
thats quite the mod list for the spring, pete!