fnkngrvOriginal postIn The Hotbox · Mar 13, 2011#1Well if all goes as planned my kit will be installed in April. If I can get really lucky I will also be picking up my Bslang harness by then as well. If anyone is interested they can check out my blog for my progress so far.
Link to a thread or page that is not in the archive
Before anyone asks I am not sure when I will be putting the car on the dyno yet since nearby options are limited. Once I have it installed I will have comparison videos however when it is complete.
Replies 64
cali yarisCanoga Park, CA · Mar 13, 2011#2cool!
Is the exhaust manifold piping inset into the flange, or welded to a flat surface?
fnkngrvThread starterIn The Hotbox · Mar 13, 2011#3Gonna have to look closer that that to be honest. When I took the pics last night I really just put out all the parts to be sure there was no damage from the USPS because there was 3 holes/tears in the box.
cali yarisCanoga Park, CA · Mar 13, 2011#4^ just curious
fnkngrvThread starterIn The Hotbox · Mar 13, 2011#5 Originally Posted by cali yaris ↑
Why is this posted in someone's build thread?
+1
fnkngrvThread starterIn The Hotbox · Jun 15, 2011#6Turbo installed. It was an awesome weekend with cdydjded and a buddy. Great fun, great work, great food, great company, and great power finally. I will have pics and video to post in the following week. I just ordered my wideband kit and am scheduled for a dyno run/tune the beginning of next week.
mazillaSan Jacinto California · Jun 15, 2011#7Killer...can't wait to see a vid.
If you don't mind, what'd this whole thing end up costing you?
fnkngrvThread starterIn The Hotbox · Jun 15, 2011#8^ I will give a synopsis after I dyno next week along with a parts list.
47_MasoN_47Northwest Alabama · Jun 15, 2011#9We need to have an AL meet some time, I'd like to drag yours against mine just to see the difference :P
Focus_Sh1ftNew Jersey · Jun 15, 2011#10👏
fnkngrvThread starterIn The Hotbox · Jun 15, 2011#11 Originally Posted by
47_MasoN_47 ↑ We need to have an AL meet some time, I'd like to drag yours against mine just to see the difference :P
Are you running FI now?
Bluevitz-rsOshawa, Ontario, Canada · Jun 16, 2011#12You need to update your blog with fresh picts! 👍
fnkngrvThread starterIn The Hotbox · Jun 16, 2011#13Here is the install pics. I just recently opened up my account with flickr since I can actually get to the site from work. There are 99 pics so my blog will only reference the link to the set as well. I uploaded last evening and have not had the opportunity to place photo descriptors yet.
http://www.flickr.com/photos/fnkngrv...7626972945192/ Bluevitz-rsOshawa, Ontario, Canada · Jun 16, 2011#14Cool! Nice work. I think this is the first time I've seen the MAF used downstream of the turbo. I'm curious to know if it's any different.
That's Carlos's kit. Looks like he is finally selling them now. Always loved the clean look of it.
fnkngrvThread starterIn The Hotbox · Jun 16, 2011#16 Originally Posted by
Yoda ↑ That's Carlos's kit. Looks like he is finally selling them now. Always loved the clean look of it.
Yup...it is very pleasant to the eye. I have had a couple people actually look under my hood since the install and had no clue other than the pipe over the engine cover. Also with how the front bumper goes "straight" down and with where the intercooler mounted you can't even really tell I am boosted from the front. The quiet exhaust lends to being stock as well.
What psi is it set for?
fnkngrvThread starterIn The Hotbox · Jun 16, 2011#18 Originally Posted by
Yoda ↑ What psi is it set for?
1,000,000,000 pounds!
Picture not included in this copy internal wastegate is set to 6~7 lbs.
BEEFnorth carolina · Jun 16, 2011#19how much was the kit and did it come with everything you needed? i have seen kits for roughly $1600 but it says it does not come with management so i figure the cost to be significantly higher after you get everything you need.
I know you said you were going to wait and get all the details before you say what you paid but was just curious what your "kit" cost and if it came with at least most of the stuff.
I spent way too much time at work looking at your photo gallery. it is a good clean install. looks really nice.
fnkngrvThread starterIn The Hotbox · Jun 16, 2011#20^ Carlos would be the one to ask about the price of the kit. I did some upgrades so I honestly cannot recall what the base price was. Additional stuff done was the FIC, powder and ceramic coating, gauges, boomslang, exhaust...I think that was over and above the kit however the kit comes with everything else really. The piping, turbo, hoses, high quality clamps, BOV, injectors, fittings, high flow downpipe, etc were all in the kit. His kit is similar to the Zage in that it gives you what would be the essentials and you pick up the "custom" stuff that you would want to go with it al a carte.
In regards to the install, thanks. Carlos did most of the work with assists from myself and my buddy John. He was professional and knowledgeable.
fnkngrvThread starterIn The Hotbox · Sep 14, 2011#21Well for those of you that don't know I have had issues since the install when attempting to use the FIC. I was finally able to get down to visit with CTScott and leave my car with him for the week. He has found a couple possible issues with my Boomslang harness which he is going to address so I am keeping my fingers crossed that I will actually be able to use the setup as it should be used. Since install I have been bypassing the FIC and using the stock ECU 100%. As long as boosting with WOT it has been great and dumping fuel as it should however if feathering the throttle the car will run lean. Not super lean, but lean nonetheless. I still have no regrets buying the custom kit from Carlos (Turbo_Yaris) as it has been solid and pretty much been able to leave it to run. I am not sure what the folks over at Boomslang are doing or whether or not there have been others that have had messed up harnesses? If this doesn't resolve my issue then the next step will be to approach AEM about replacing the FIC.
cali yarisCanoga Park, CA · Sep 14, 2011#22 I am not sure what the folks over at Boomslang are doing or whether or not there have been others that have had messed up harnesses? If this doesn't resolve my issue then the next step will be to approach AEM about replacing the FIC.
Has it been determined with 100% certainty that the harness is defective? I can't tell from your post, especially this last part.
fnkngrvThread starterIn The Hotbox · Sep 14, 2011#23 Originally Posted by
cali yaris ↑ Has it been determined with 100% certainty that the harness is defective? I can't tell from your post, especially this last part.
The answer to that would be no at this time however with the modifications that Scott will be making I am hoping for an answer in the next 24-48 hrs. We did shoot Brian an email to have him look at his harness since his was built and purchased at the same time as mine. I am awaiting a response from his as well.
cali yarisCanoga Park, CA · Sep 14, 2011#24That will be very helpful. I have two on the shelf and need to know if they should go back to Boomslang for modification.
fnkngrvThread starterIn The Hotbox · Sep 14, 2011#25 Originally Posted by
cali yaris ↑ That will be very helpful. I have two on the shelf and need to know if they should go back to Boomslang for modification.
Will let you know for sure. I could have shipped mine back to Boomslang, but then the car would be off the road and I can't afford that. Also I have no issue with trusting Scott. He has been an immense help with all of my electrical questions over the last year.
CTScottUSA, CT · Sep 14, 2011#26Tonight I will be modifying the harness, so we'll have the answer. The issue that I found with it last night is that the MAF (VG) signal and the Crank position sensor (NE-) signal are supposed to be "intercepts" rather than "taps" as they are wired on the boomslang. As-is. the F/IC can only read, and not override the MAF and Crank signals to the ECM.
BrianRiverside, CA · Sep 14, 2011#27I'm hoping to get my F/IC back from AEM this week. Everything was working perfectly with my Boomslang and F/IC except for the starting issue. Did Carlos modify your Boomslang at all?
fnkngrvThread starterIn The Hotbox · Sep 14, 2011#28If I recall correctly he only removed a couple resistors because the harness was designed for the 1nz for the scions and not the Yaris...but I could be recollecting wrong.
CTScottUSA, CT · Sep 14, 2011#29 Originally Posted by
fnkngrv ↑ If I recall correctly he only removed a couple resistors because the harness was designed for the 1nz for the scions and not the Yaris...but I could be recollecting wrong.
I didn't see any signs that it has been modified.
cali yarisCanoga Park, CA · Sep 14, 2011#30^ interesting. I remember Carlos posting that these harnesses were made for the Yaris, but maybe that was after that first one was made. My memory isn't that good.
fnkngrvThread starterIn The Hotbox · Sep 14, 2011#31I am trying to tecall conversations he said he had with boomslang but we discussed so much it is foggy.
BrianRiverside, CA · Sep 14, 2011#32I contacted Boomslang before I bought the harness and they said it was made for the Yaris. Is there anyone else besides the 3 or 4 known users that are actually using the harness?
cali yarisCanoga Park, CA · Sep 14, 2011#33 The issue that I found with it last night is that the MAF (VG) signal and the Crank position sensor (NE-) signal are supposed to be "intercepts" rather than "taps" as they are wired on the boomslang. As-is. the F/IC can only read, and not override the MAF and Crank signals to the ECM.
CTScott, Boomslang's answer:
Hello,
We intercept the MAF and CKP signals.
MAF is light green output--white input.
CKP is orange/white output—orange/black input.
Sounds like he’s reading the harness wrong.
CTScottUSA, CT · Sep 14, 2011#34 Originally Posted by
cali yaris ↑ CTScott, Boomslang's answer:
Hello,
We intercept the MAF and CKP signals.
MAF is light green output--white input.
CKP is orange/white output—orange/black input.
Sounds like he’s reading the harness wrong.
My answer to them - Maybe they should try to get their act together...
On Adrien's Boomslang:
CPS (NE+) is orange/black input, orange/white output
MAF (VG) is white input, no output.
CPS (NE-) is yellow/black input, no output.
Both of these signals should be intercepts, per AEM.
cali yarisCanoga Park, CA · Sep 14, 2011#35got pics? otherwise, it's a word game.
Further, Adrian's harness may not be the production piece they make now. That is still in question.
Focus_Sh1ftNew Jersey · Sep 14, 2011#36CTScott, just so you know - my crank signal is tapped. I tried to intercept it and the car wouldn't start. This make sense - the FIC only needs to see the crank signal, not manipulate it.
As for the MAF - that definitely is a problem (although I'm sure I don't need to be the one to tell you that lol).
On a side note: I'm bummed you didn't come down to Jersey for help Adrian. You could have delivered that kit I'm still hoping to buy from you 😉
CTScottUSA, CT · Sep 14, 2011#37 Originally Posted by
Focus_Sh1ft ↑ CTScott, just so you know - my crank signal is tapped. I tried to intercept it and the car wouldn't start. This make sense - the FIC only needs to see the crank signal, not manipulate it.
As for the MAF - that definitely is a problem (although I'm sure I don't need to be the one to tell you that lol).
So, your NE+ (pin 122 of the ECM) is tapped as well as the NE- (pin 121)?
cali yarisCanoga Park, CA · Sep 14, 2011#38sorry to run this on two forums, but it helps everyone I think:
Boomslang:
Cps ne- is the crank timing ground. It is supposed to be spliced into, not intercepted. Same goes for the cam timing ground.
We worked with AEM on the CKP/CAM/timing ground wiring on the newer Toyotas back in 2007 before the FIC was readily available. We’ve made a couple thousand Toyota/Scion harnesses since.
MAF output is light green, same color as the extension portion of the harness, it blends right in.
Focus_Sh1ftNew Jersey · Sep 14, 2011#39If I remember correctly, I tapped the MAGI+ and MAGI- wires to crank + and crank ground respectively, and the MAGO wires (+ and -) were left unused.
EDIT: What Garm quoted makes perfect sense as well. Basically just try all three methods until you get one to work. I don't understand why intercepts didn't work for me but whatever - taps work.
Oh yeah and Adrian - I hate to say I told you so but... Well, I did. 😎
BrianRiverside, CA · Sep 14, 2011#40 Originally Posted by
Focus_Sh1ft ↑ my crank signal is tapped. I tried to intercept it and the car wouldn't start. This make sense - the FIC only needs to see the crank signal, not manipulate it.
This might explain my starting issue. I'll pull my harness this weekend and take some pics.
Bluevitz-rsOshawa, Ontario, Canada · Sep 14, 2011#41How does the FIC retard timing if the crank signal isn't intercepted? Does it also intercept the 4 ignition signals?
CTScottUSA, CT · Sep 14, 2011#42 Originally Posted by
Bluevitz-rs ↑ How does the FIC retard timing if the crank signal isn't intercepted? Does it also intercept the 4 ignition signals?
It only connects to the injectors, CAM, Crank, and MAF. There is no direct control over spark, just timing via intercept of the crank (if it is wired in intercept mode).
Bluevitz-rsOshawa, Ontario, Canada · Sep 14, 2011#43That's what I thought. That's why I don't understand people's problems with it wired in series with the FIC.
Focus_Sh1ftNew Jersey · Sep 18, 2011#44I finally had a chance to double check my wiring today. It turns out I intercepted the positive crank wire, and tapped the negative. Same with the cams. I also verified ignition can, in fact, be adjusted.
fnkngrvThread starterIn The Hotbox · Feb 24, 2012#452007 Yaris Sedan
Custom T28 Turbo 7psi
underdrive crank pulley
15" stock steelies
winterforce tires
AEM F/IC
AEM UEGO Wideband
High Flow Cat
2.5" mandrel bent exhaust
MagnaFlow 6" canister universal high flow muffler
91 octane with STP octane boost
HKS Super Sequential BOV
Picture not included in this copy
No video at this time. Will record video after fuel pump is upgraded possibly within next 30-60 days.
ilikericesavannah, ga · Feb 24, 2012#46🤤
cali yarisCanoga Park, CA · Feb 24, 2012#47excellent!
What changed from all the "going lean at 5k" etc.?
fnkngrvThread starterIn The Hotbox · Feb 24, 2012#48 Originally Posted by
cali yaris ↑ excellent!
What changed from all the "going lean at 5k" etc.?
Well that is an interesting story. Apparently they had heat soaked the motor to the point that while on the dyno during his first pulls the car was going rish and then super lean at around 52-5400. During the 3 days he had my car he did 28 dyno pulls. On the evening before I came back to the shop he took the car out and did a road test. When he did that he was noticing that he was able to get to around 6100 before it would do the same thing. Alex wasn't surprised because of course a dyno is not the road. He made some final adjustments and didn't soak the motor as deeply and then took it out for another test drive immediately. He was still being able to run up to 6k. He also feels that I am actually around 180-185HP on the road. I picked up the car late yesterday afternoon and drove it the 420 miles home. The car ran great for the most part. I know that I have some work still left to be done to have it as close to perfect that an F/IC can get it. My plans are still to go with a stand alone down the road. The F/IC is merely a stepping stone. He said that he could not confirm for sure that once I upgrade my fuel system whether or not it will net more power, but he feels that it could because the car is still producing power when he lets off at the 5900/6000rpm point.
47_MasoN_47Northwest Alabama · Feb 24, 2012#49Nice! Glad it looks like you finally got the kinks worked out of it man. Have you done the new paintjob and all that jazz yet?
fnkngrvThread starterIn The Hotbox · Feb 24, 2012#50^ not yet. slated for End of March into April if all goes well.