sold
steering wheel hub adapter
18 posts · 7,060 views
Replies 17
what is the cost new for these things?
$89 for the NRGOriginally Posted by TickleTimeTim ↑what is the cost new for these things?
http://www.racinglab.com/nrg-short-hub-toyota.html
$100 for the other
http://www.evasivemotorsports.com/Me...=WB_HUB_TOYOTA
Do you have the boot for the WB hub, or just the part as shown?
Just the part shown. I picked it up used and the boot was missing... It did come attached to a broken steering wheel. 😠Originally Posted by cali yaris ↑Do you have the boot for the WB hub, or just the part as shown?
Our new setup does not use the stock steering column, so these are no longer of any use.
any idea how to disable the airbag light?
No, I don't have the stock dash in our car.Originally Posted by rapev-8 ↑any idea how to disable the airbag light?
Picture not included in this copy
LmaoOriginally Posted by Jason@SportsCar ↑No, I don't have the stock dash in our car.
Picture not included in this copy
^^^^hahah. i want to see this in person. its like a weee death-proof
are all the controls for the car on the right windshield washer / blinker controller ?
I don't quite get why you said it didn't have a provision to retain horn.
as for airbag i do believe a member here said something about by passing both the connector with a resistor, 5ohms IIRC.
if it's just some little wiring for horns to work im interested.
as for airbag i do believe a member here said something about by passing both the connector with a resistor, 5ohms IIRC.
if it's just some little wiring for horns to work im interested.
bump
Bump for new ridiculously low price.
Originally Posted by Schizoprenia ↑I don't quite get why you said it didn't have a provision to retain horn.
as for airbag i do believe a member here said something about by passing both the connector with a resistor, 5ohms IIRC.
if it's just some little wiring for horns to work im interested.
To bypass the dual squib airbag you would connect two resistors across the two airbag connectors. 2.2 to 4.0 ohms are the typical values used for this purpose. As for the horn, with a hub adapter you lose the spiral cable (AKA clockspring). The spiral cable is a device that allows the horn and airbag wires to be able to be rotated back and forth without eventually snapping. Some hub adapters have their own version of a spiral cable to allow a horn switch to still remain on the rotating steering wheel. In a worst case, you could mount a switch to the dash and wire the horn to it.
killer deal [bump]
Update, found the horn wire harness for the NRG unit.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
consider the NRG hub and horn harness sold. PM me your paypal info so I can send the money
Sold, paid and shipped.Originally Posted by Jerkratt ↑consider the NRG hub and horn harness sold. PM me your paypal info so I can send the money
Thanks