Yarisworld Archive

Suspension question?

5 posts · 2,840 views

Mister ZOriginal postRancho Cucamonga, CA · Mar 5, 2011#1
The purpose of camber bolts to fix any camber issues correct? is there any camber bolts for the rear? and Also are camber bolts necessary if I plan to run negative camber? Thanks everyone!

Replies 4

Bluevitz-rsOshawa, Ontario, Canada · Mar 5, 2011#2
There is no adjustment for the rear.

The bolts you speak of replace the bolts holding the struts to the hub. They allow you to change front camber.
WeeYariGeorgetown, Ontario, Canada · Mar 5, 2011#3
Originally Posted by Mister Z ↑
is there any camber bolts for the rear?
Shims (ie stainless steel washers) placed between the axle and brake drum on the lower two bolts.
severous01SE Texas · Mar 5, 2011#4
hunter makes a shim kit also. it's much easier and a more direct use for hunter aligners. if you're rear alignment is out and they say that they can't do the rear cuz there's no adjustment...buy a shim kit for 10 bucks and have them install it. specially if they're using hunter machines.

you can buy shims from hunter.com.
ilikericesavannah, ga · Mar 6, 2011#5
microimageonline.com also sells rear camber shims