YAR1SOriginal postRaleigh, NC · Feb 28, 2011#1Had a wink Mirror installed today by a friend's friend today, what an awesome upgrade!!! Beside's Garm's monster yaris.... I may be the only other yaris which such a view :D ♥
Pics of my own mirror will come soon, til then here is garm's mirror.
Picture not included in this copy
Replies 38
cali yarisCanoga Park, CA · Feb 28, 2011#2I was like "she has the same wheel???".... no, wait...
haha, congrats I like that mirror a lot but it does take some getting used to.
big loLoiza,Puerto Rico · Feb 28, 2011#3Lol
YAR1SThread starterRaleigh, NC · Feb 28, 2011#4it sure does..... and im sure losing the visors takes some sacrifice too.
Dperrybushkill, pa · Feb 28, 2011#5i would probably crash hard or very often because i would b looking at the paneramic view behind me hah
TLyttleKeremeos BC · Feb 28, 2011#6Last I heard, Wink mirrors were illegal in most states, usually for the reason mentioned above. People get so engrossed in what is happening behind them that they lose track of what is ahead!
At one time, it seems to me that they had a warning on them, "For track use only", taking the item back to its roots, the track.
cali yarisCanoga Park, CA · Mar 1, 2011#7I can't find the reference in CA law that would make it illegal. Can you share your source, please?
I'm not taking it off, either way; the increased visibility is good for someone that won't get distracted.
matthewaiunited states · Mar 1, 2011#8do the sun visors need to be taken out for this to be installed?
ilikericesavannah, ga · Mar 1, 2011#9i dont see how else u would install this with out taking them out
YAR1SThread starterRaleigh, NC · Mar 1, 2011#10the visors need to be removed, and small holes are drilled in the the sheet metal that houses the clip holdings for the visors.... most car's visors are held in by screws (im guessing?) but the yaris' visors are held in by clips, lol.
drilling is non damaging and visors can be replaced. I have seen modifications to the wink mirror to hide it behind the visors but I wouldnt think this would work with the yaris as you'd have to place them back so far that they would start to intrude on visualization of the road ahead of you.
YAR1SThread starterRaleigh, NC · Mar 1, 2011#11As soon as I find my cam I'll take a good pic of mounting.
oh and I hope they arnt illegal cause I would presume they would be better..... maybe a little distractive, who wouldnt love the panoramic view? :D
cali yarisCanoga Park, CA · Mar 1, 2011#12If you mount the Wink onto the glass at the top of the windshield (they have a kit for that), you can keep the visors, and use them if needed. You also don't have to drill anything. I did not do it that way, though.
YAR1SThread starterRaleigh, NC · Mar 1, 2011#13I would think you'd get a lot of vibration in the mirror if you had one mount point....
TLyttleKeremeos BC · Mar 1, 2011#14Sorry, I don't have documentation on the legality of Wink mirrors. I'm not even sure it was strictly the Motor Vehicles guys, it may have been the insurance leeches. Besides, my memories of Wink mirrors go back to the beginning, two generations ago. Let us know what you find out...
cali yarisCanoga Park, CA · Mar 1, 2011#15The glass kit allows you to mount it on the glass with two attachment points.
YAR1SThread starterRaleigh, NC · Mar 1, 2011#16 Originally Posted by
cali yaris ↑ The glass kit allows you to mount it on the glass with two attachment points.
ohhhhhh k 👍
matthewaiunited states · Mar 2, 2011#17 Originally Posted by
ilikerice ↑ i dont see how else u would install this with out taking them out
^^^ great response ...
but thanks everyone else
matthewaiunited states · Mar 2, 2011#18oh and also in that first picture whats the black thing to the left of the map lights ? is it for a blue tooth or a mounting clip?
ilikericesavannah, ga · Mar 2, 2011#19i dont see how this could be anything else besides a bluetooth or a mounting point.....
YAR1SThread starterRaleigh, NC · Mar 2, 2011#20that might be something he has wedged in between the mirror and headliner to stop some of the mirror vibration....
cali yarisCanoga Park, CA · Mar 2, 2011#21^ hands free microphone (that's my car).
Midnight DrifterMonroe, NJ · Mar 3, 2011#22Let's see it installed!🤘
AppleJacks716Wisconsin · Mar 3, 2011#23Here is how I mounted mine.
Picture not included in this copy
Picture not included in this copy
I used a dremel to cut the visor off the plastic mount. Then kept shaving away the plastic mount until the "L" bracket fit in it. It turned out nice. Very oem looking compared to seeing the sheetmetal.
cali yarisCanoga Park, CA · Mar 3, 2011#24^ That's a lot cleaner than my install. 👏
YaristeveLos Angeles · Mar 3, 2011#25I've been studying the headliner mounting in the service manual. Is it really so strong and rigid that things such as the grab handle (and your wink mirror) can be mounted to it without being anchored into the roof structure? I was thinking of mounting my GPS to the headliner and taking power from the driver side "personal light".
matthewaiunited states · Mar 3, 2011#26 Originally Posted by
ilikerice ↑ i dont see how this could be anything else besides a bluetooth or a mounting point.....
dudes just all up in the "i dont see how" mode makin me look like a fool
cali yarisCanoga Park, CA · Mar 3, 2011#27PK, it's a series of fixed, flat mirrors that give a wide field of view. I can even see out my front windows with it. Really helps eliminate the blind spot when you get used to it.
Yaristeve, no, all of those accessories clip/mount into metal underneath the headliner.
Picture not included in this copy1 attachment not included in this copy
AppleJacks716Wisconsin · Mar 3, 2011#28On my civic I first used the glue on windshield mounts. They work alright. It uses a silicone based glue. It's a nightmare attaching them and making sure everything lines up. If you hit a bump hard enough, like most railroads, it flops down and you are looking at your lap. If you hit a really big bump it falls off. Use the visor way to install. Much more rigid and you don't get nearly as much vibration in it.
TylermayerSnohomish, WA · Mar 26, 2011#29please show/tell me how to install by taking off the sun visor
cali yarisCanoga Park, CA · Mar 26, 2011#30^ see post #23
TrubinBrooklyn, NY · Mar 27, 2011#31If someone behind you has high beams on, wouldn't it totally blind you?
TylermayerSnohomish, WA · Mar 27, 2011#32 Originally Posted by
cali yaris ↑ ^ see post #23
i know but i cant figure out to get it off
bzinn 1University Place,WA · Mar 27, 2011#33I remember when those first came out and we put them in our cars,cool then,cool now.
YaristeveLos Angeles · Mar 28, 2011#34 Originally Posted by
Trubin ↑ If someone behind you has high beams on, wouldn't it totally blind you?
All of the panels are tinted so it's not too bad. If you've ever driven a car with an automatic dimming rear view mirror, it is almost as dark as that but all of the time.
AppleJacks716Wisconsin · Mar 28, 2011#35 Originally Posted by
Tylermayer ↑ i know but i cant figure out to get it off
1 Completly remove your visors.
2.Use a dremel to cut off the visor mounts
3.Use a dremel to cut a slot for the wink brackets
4. Install the bracket onto your car (pain in the butt, because you have to press them in fully put together)
5. Install wink mirror onto brackets
Yes you ruin your stock visors, yes the brackets will probably never come out again with out totaly ruining them. But you will need to buy new visors to replace them anyways. I didn't use an screws or glue for attaching the brackets. The fit is so tight you don't need them. My mirror doesn't move at all. I have no pictures of the install.
racerbLeland, NC · Mar 28, 2011#36If you want to get out on the cheap, the CIPA model 34000 is what I use in my track car, it's 12" wide with a panoramic view. Here is the link from Summit Racing,
http://www.summitracing.com/search/P...d=cipa+mirrors Clips onto stock mirror and gives almost a 180 view of whats behind you!!
racerb 👏
catliektheifLeesburg, VA · Sep 11, 2013#37i got one today and installed it.. was kind of a bitch! I did it to where I could keep the visors with somewhat usability by sending a bolt through the headliner in to an existing hole in the frame by the visor mounts. I really screwed up my passenger side visor mount though.. oh well. ill post pics tomorrow :P
YaristeveLos Angeles · Mar 25, 2015#38Sorry for resurrecting this thread from the dead.
I was just sitting here and it just hit me (even though I submitted a reply earlier): for some reason, it has taken me 5 years to realize that the Yaris, with its very open design is an ideal candidate for a Wink mirror. I have one in my 1979 Celica (similar open greenhouse design) and love it.
I guess this is my next mini-project...
robkayNW OH · Apr 27, 2016#39I had a 4 panel clip-on Wink in my Volvo 240's. Loved it. But, I sold it off as it did not fit the Yaris and I don't want to do away with my visors. It sure is tough going back to a standard mirror after having a Wink. You feel like you're looking through a peep hole. I do, though, use a panoramic style mirror similar to the CIPA referenced above. The more you can see out the back and sides the better IMO.