Dude to be honest, I would just try a bigger amp on them, i bet you weren't even hitting half the RMS. (get the model number of your pioneer and we can look that up ) I have been running the Hifonics Brutus Line and have been happy with there stuff. You're asking for Opinions so here's mine 👍 Everybody has there personal preference on audio, and i'm not gonna flame any other brand or believe mine is better, it's all on your own personal experience.
This is what i have and i'm pushing two 12 inch kicker comps with no problem @ 1 Ohm
They have an ebay, but these are the guys i ordered two amps from and were pretty good ..
http://www.vminnovations.com/product...Amplifier.html Picture not included in this copy # Type: Mono Block
# 1-Ohm Power Rating 1x1200
# 2-Ohm Power Rating 1x900
# 4-Ohm Power Rating 1x450
# Turn-On Delay/ Mute
# Frequency Response @-3dB: 20-250Hz
# Damping Factor: >250
# Signal To Noise Ratio: > 95 dB
# THD + Noise: < 0.1%
# Variable Input Level Control (RCA/Unbalanced): 0.2V - 9V
# Variable Input Level Control (Mini DIN Balanced): 0.4V - 18V
# Input Impedance: 47k Ohm
# Input Impedance: 20k Ohm
# Power and Specific Diagnostics LEDs
# Protection DC, Short Circuit, Overload
# Power Supply - All MOSFET: Full PWM
# Power Output Circuit Type: Ultra-Fi MOSFET
# Variable Phase Shift
# Phase Change in Degrees: 0-+180
# Variable Low-Pass 24 dB Octave: 35Hz - 250Hz
# Variable Subsonic Filter: 15Hz - 35Hz
# Bass EQ: 0-+18 dB
# Balanced Inputs
# RCA Inputs
# RCA Line Outputs
# Remote Bass Module Included
# Gold Plated Power Terminal Blocks: 4 GA
# Dimensions : 11.42" x 9.45" x 2.52"