Yarisworld Archive

tire size change advice needed

17 posts · 6,203 views

aucoriumOriginal postSouth Africa · Feb 6, 2011#1
hey guys

i have a 1800 TS , looking to change tires to this setup

OEM - 205 / 45 / 17

new setup - 205 /40 /17

any ideas on the change ? i know it will effect the speedo a little , but you guys recon its safe enough ?

Replies 16

aucoriumThread starterSouth Africa · Feb 7, 2011#2
?? anyone ?
cool_beans00LA · Feb 7, 2011#3
safe? sure, you'll be going slower than the speedo says so.
thebarberGrand Rapids, MI · Feb 7, 2011#4
Originally Posted by Thirty-Nine ↑
Personally, I think it will look a bit off. There will be more fender gap. There will be 10.2mm more gap in the fender if you drop down to a 40 series.
i agree. but at least he'll also be 10mm lower...
kimonaHuntington Bch, CA · Feb 9, 2011#5
The TS stock suspension is already a bit lower than the stock suspension on US version cars. The 205/45's are a very good fitment on the TS. Yes, 205/40's will fit without issue; however, what would be your rationale for going with a shorter tyre?
aucoriumThread starterSouth Africa · Feb 10, 2011#6
hey guys thanks for the advice , yeah , its gonna make the fender gap bigger , currently im running a Tein spring kit , attached is a pic of how it sits

my reason for going to 40's is cause it is alot cheaper , the 45's cost R1300 , the 40's cost R700 , thats about half the price .. so thats my thoughts ... mmmm

2 attachments not included in this copy

aucoriumThread starterSouth Africa · Feb 10, 2011#7
the car actually sits a little lower than in this pic , its more on the wheels , will try take a better pic tomorrow
aucoriumThread starterSouth Africa · Feb 10, 2011#8
also , wont the 40's have better handling ?
33OHDover, Ohio · Feb 10, 2011#9
I ran 205/40/17's with no problem. Go for it.

Picture not included in this copy
aucoriumThread starterSouth Africa · Feb 10, 2011#10
what drop you have on the car ?
33OHDover, Ohio · Feb 11, 2011#11
Tanabe DF210's that are clamped to be lower than normal. Around 2.3" in front I would say?
aucoriumThread starterSouth Africa · Feb 11, 2011#12
ah ok ... i must say , im very hesitant to put on the 40's , 10mm drop is quite a bit on a already tein drop kit
kimonaHuntington Bch, CA · Feb 11, 2011#13
If the 45's are working well with your suspension mods, then I'd stick with that size.
aucoriumThread starterSouth Africa · Feb 14, 2011#14
Originally Posted by kimona ↑
If the 45's are working well with your suspension mods, then I'd stick with that size.
yeah , i recon i will stick to OEM specs for now , got a set of Yokahama R1's in mind that are well priced at R800 each.
PumpkinSteveTyne and Wear, UK · Feb 15, 2011#15
How do you like the Teins? I just ordered a set yesterday plus a TRD sway bar. They say they give 30-35mm drop, would you say that is accurate? 'Cos I just measured the stock gap from my wheel to my arch and I've got 60mm, looks like a monster truck.
aucoriumThread starterSouth Africa · Feb 23, 2011#16
Originally Posted by PumpkinSteve ↑
How do you like the Teins? I just ordered a set yesterday plus a TRD sway bar. They say they give 30-35mm drop, would you say that is accurate? 'Cos I just measured the stock gap from my wheel to my arch and I've got 60mm, looks like a monster truck.
you gonna love the s-tech ! yeah , its about a 35mm front , 30mm rear , but becuase the TS has a slighly heavier motor setup , it seems a little lower , looks great. it should take it all the way on to the wheels , provided you running the OEM size tires
aucoriumThread starterSouth Africa · Feb 23, 2011#17
Originally Posted by Thirty-Nine ↑
FYI, I'm on Tein S-tech springs with Tokico HP shocks, and I love 'em. This is the second set I've had. I had a set of a Scion xB, too. Good overall spring for a nice compromise of ride, drop, and performance.
thanks for the Feedback ;-) ... im thinking of going with the Red's , want full adjustment ;-)