Yarisworld Archive

Junkyard Civic HX rims

12 posts · 5,357 views

FreedanOriginal postSan Diego, CA · Feb 1, 2011#1
Look at what I found at the junkyard. Honda Civic HX rims, 14x5.5 ET45 they weight about 11lbs and I was quite surprised that Enkei made them!! 😲

I got the set for $140. I took this picture indoors because they rims were freshly painted. Will have to do a clear coat once the white cures.

Picture not included in this copy

There were a bit scuffed up, but after some sanding, priming and white rattle can paint, they look pretty good! Now I just have to save up for some tires and I'll be rolling on junk. 😆

Replies 11

severous01SE Texas · Feb 1, 2011#2
awesome...i'd like to find some factory escort or honda rims that are 15 or 16"

maybe even a cobalt or cavalier rim.
Bluevitz-rsOshawa, Ontario, Canada · Feb 1, 2011#3
Just curious, why didn't you just take the tires off before painting them? Now you'll have to fudge around to get them off trying not to re-scuff up the paint.
jpmck03USA · Feb 1, 2011#4
Those look nice, but dittos on the question of whether or not to paint them with the tires on them.
thebarberGrand Rapids, MI · Feb 1, 2011#5
nice buy

but lose the honda logo's...
Kaotic LazagnaCentral Valley, CA · Feb 1, 2011#6
I thought about getting HX rims. lol. Can't find any tho.
jekqmbSTL · Feb 1, 2011#7
ooo nice find man!!!
FreedanThread starterSan Diego, CA · Feb 2, 2011#8
Originally Posted by Bluevitz-rs ↑
Just curious, why didn't you just take the tires off before painting them? Now you'll have to fudge around to get them off trying not to re-scuff up the paint.
Hehe, yeah, I really didn't thought that far ahead. 😛
It dawned on me that those weight clips might be a problem while I was already into painting the wheels. Hopefully whoever is balancing my wheels will put new weights in the same spot.
severous01SE Texas · Feb 2, 2011#9
you can always go back and put a second coat on. just lightly sand the area with a 120 then a 180 or so and clean with alcohol NOT BRAKE CLEANER AS IT WILL PEEL THE PAINT...and spray over just that area if you are good at touching up.
solarVitzSan Diego · Feb 3, 2011#10
nice find. it would look better if you masked the tires with a masking tape before you paint them.
Black_griffin6Atlanta Georgia · Feb 3, 2011#11
Originally Posted by Bluevitz-rs ↑
Just curious, why didn't you just take the tires off before painting them? Now you'll have to fudge around to get them off trying not to re-scuff up the paint.
Maybe he wanted some white-wall tires? 😆

Nice find man. 👍
FreedanThread starterSan Diego, CA · Feb 3, 2011#12
Ghetto White Wall tires!!! 😆

The tires that are on the rims now are bald, that's why I just sprayed them along with the rims. 👍