Yarisworld Archive

Anyone Have a trailer hitch on a Yaris??

57 posts · 62,353 views · page 2 of 2

Replies continued

blktiger60Washington · Apr 4, 2015#51
Originally Posted by Eduardo_mty ↑
blktiger60.. The wheels are the original from this trailer or you changed

Are 8 Inch wheels?
Original.

Originally Posted by Eduardo_mty ↑
One more question the trailer have a serial number in it frame.

Becouse i live in México, And i cant import any "car" with serial number printed on it
Harbor Freight trailers have a VIN number and, I had to get a title.

Originally Posted by Eduardo_mty ↑
Can you upload a picture from your removable box for your trailer.

At this time im reading this forum for take ideas.
Well, I looked at the Jeep forum. Those are pretty fancy trailers. I'm not a rich man so my little trailer was super basic. I used CDX plywood some 2x2 and 1x6 wood for reinforcement. I used wood screws and Liquid Nails heavy duty construction adhesive on the 2x2's. The 1x6's I used for the mounts that go into the trailer - these I used nuts and bolts, I also used some aluminum plate to make them stronger.

Pics:
#1 is without the box, flatbed
#2 is the reinforcement inside - front
#3 is the reinforcement inside - back
#4 is one of the mounts
flatbed.jpgfront inside.jpgrear inside.jpgmount.jpg
grilled cheeseussnowbirding in Tucson · Mar 31, 2018#52
OK, I'll share my 4'x8' Hazard Fraught "super duty" folding trailer.

I put it together last summer, since then have used it for trips to the dump, helping people move, and a few 100+ mile highway trips. Handles fine if you are careful about weight distribution. I really want to enclose for camping.

Link to photos



YAR1SRaleigh, NC · Apr 12, 2018#53
pics of my yaris trailer 👍
IMG_2093 (1).JPGIMG_2149.JPG
ern-dizCA all day · Apr 12, 2018#54
That is too cool. Your Yaris looks great and the little trailer behind it is just awesome lol.
David CMontreal · Apr 18, 2018#55
Originally Posted by mmstingray ↑
I want to add a hitch to my 2009 sedan so I can add a bike rack. Both my mountain bike and my wife's bike have a severely sloped downtube, so I'm looking at both the Draw-Tite Sportframe Trailer Hitch Receiver and Lets Go Aero BikeWing-2 2-Bike Rack at ETrailer.

The sales people are super helpful there and advised that I consult my dealer first because the tongue weight shouldn't exceed 70 lbs. And that's in Canada. I'm in state States where I think it's somehow verboten. With 2 bikes and the rack, it probably won't exceed 70lbs by much.

Anyone experience any repercussions? I've searched the forum but couldn't find anything definitive. I have no towing aspirations.


70lbs tongue weight doesn't sound right, at least not if you're talking about how much weight you can put on the frame behind the rear axle. My 2007 HB can go up to 200lbs of weight on a hitch, so about 150lbs of actual useable cargo if you deduct the weight of the hitch receiver and the rack.

Two bikes plus a rack and a hitch receiver would be at least 100lbs. I've done 1000km drive with four 15" wheels on a cargo carrier no problem on mine, which is roughly 135lbs (34lbs per wheel) plus 35lbs for the carrier and receiver adapter and then the hitch receiver itself, for a total of 200lbs give or take.

I'm in Canada btw, but I drive that setup in the states too.

Now the tongue weight as in a trailer tongue weight is different than load limit. For your application, you're looking at the load limit, which is about 200lbs (at least for the HB).
grilled cheeseussnowbirding in Tucson · Aug 5, 2018#56
I built a thing a few months ago!







Weighs 820 lbs with a mattress inside, maybe 50 lbs on the tongue. I installed air helper springs in the rear of the Yaris, which stiffens up the rear suspension so that it doesn't sag. Driven it about 500 miles so far, from interstate highways to dirt forest service roads. The rig has limited power going up hills (like a semi truck), but no stability or braking issues, even at the limits of traction. Still around 28-30 MPG.
jayehBritish Columbia, Canada · Aug 5, 2018#57
Originally Posted by blktiger60 ↑
Took my little harbor freight trailer mod on a 450+ mile trip (one way) to Astoria Ore. Down through the Columbia river gorge at speeds reaching 90MPH. Had vacation gear in it, not a lot of weight. Those are aftermarket LED taillights.
I had the same trailer! Bought it used for way too much Money and spent way too much Money repairing it, but it gave me no trouble being towed across Canada. Now I want to buy another one - but brand new. How hard is it to build?

Originally Posted by grilled cheeseus ↑
I built a thing a few months ago!







Weighs 820 lbs with a mattress inside, maybe 50 lbs on the tongue. I installed air helper springs in the rear of the Yaris, which stiffens up the rear suspension so that it doesn't sag. Driven it about 500 miles so far, from interstate highways to dirt forest service roads. The rig has limited power going up hills (like a semi truck), but no stability or braking issues, even at the limits of traction. Still around 28-30 MPG.
That is impressive! 🎉