Yarisworld Archive

Stock/Built Motor - Boost and Durability

74 posts · 29,367 views · page 1 of 2

YodaOriginal postFL · Jan 13, 2011#1
As the title suggest this is where I hope to gather all the information for our motor with regards to boost and durability. I think this would provide useful information for members looking to boost the 1NZ.
We would state either stock or built motor, what type of forced induction, SC or turbo, psi, Whp, management, Fuel or ignition upgrades,miles driven while boosted, length of time driven on boost and driving style. Feel free to add any additional information.


I will use myself as an example

Engine: Stock
F/I: Custom turbo kit T25
Boost: 6.5 psi
WHP: N/A
Management: None right now. Aem FIC being shipped.
Fuel upgrade: 1zz injectors only.
Miles on Boost: ~2k miles
Length of time: 1 Month🙄
Driving style: Eh I rarely floor it maybe 3 times out of the week.

^^^That's just a sample it can be anyway you want to write it. Just some info so we can track what our little engines can put up with for how long.
It is assumed that everything is in working order until you update your post stating any failures that may have occurred.

Any and all ideas how we can make this thread better is welcomed😎

Replies 73

cali yarisCanoga Park, CA · Jan 13, 2011#2
^ Just curious, unless someone has a failure to report, how does the information shed light on the subject of durability? We should just report stuff that breaks and when.

I'll play anyway, though. I included the grade of gas I use.

Engine: Built (bore/sleeved/rods/pistons/springs/head work)
F/I: Custom turbo kit T28
Boost: 14-24
WHP: 357
Management: AEM EMS
Fuel upgrade: 632cc injectors, Walbro pump, return line, modified Perrin rail, water/meth
Fuel: Pump gas (91)
Miles on Boost: ~2k miles
Length of time: 6 months
Driving style: I hammer it several times a week and race 1-2 times a month.
MISC: rev limit 7300
xnamerxxso cal · Jan 13, 2011#3
This thread is entirely useless unless you know why the motor failed. Its nice to say say my stock motor blew up with 200hp but go into no detail as to why that happened. If my stock engine runs leans and seizes or burns a piston it wasn't the engines fault that it happened but say a bad injector or fuel pump or if I toss a rod from running to low on oil but happen to make 160 hp with a turbo its not the turbos fault I ran low on oil so a failure diagnosis is more important than yeah I upped the power and now its dead.
YodaThread starterFL · Jan 13, 2011#4
Originally Posted by cali yaris ↑
^ Just curious, unless someone has a failure to report, how does the information shed light on the subject of durability? We should just report stuff that breaks and when.
We always get questions about how much boost can be run on stock engine and how long it will last and so on and so on. This is just to paint a picture of what every1 has done to there car and how long it has been running under those conditions safely. Each of our setups are a bit different so as a new person I would be able browse and gain an idea of how long at very least I can run a specific setup on my engine before I enter the gray area.
Your idea is also good but then we would have no one posting anytime soon😉 I would hope that if something breaks further down the line that the poster would update his post.
YodaThread starterFL · Jan 13, 2011#5
Originally Posted by xnamerxx ↑
This thread is entirely useless unless you know why the motor failed. Its nice to say say my stock motor blew up with 200hp but go into no detail as to why that happened. If my stock engine runs leans and seizes or burns a piston it wasn't the engines fault that it happened but say a bad injector or fuel pump or if I toss a rod from running to low on oil but happen to make 160 hp with a turbo its not the turbos fault I ran low on oil so a failure diagnosis is more important than yeah I upped the power and now its dead.
I dont think its entirely useless. It covers pretty much questions that people ask often. How much boost,how long you running at that boost, what did you upgrade to run this n that safely. Maybe i thought it was implied that if something breaks that the poster would state what broke and after how many miles n such. Maybe I should up date my first post. Thanks for the input.
xnamerxxso cal · Jan 13, 2011#6
Originally Posted by Yoda ↑
I dont think its entirely useless. It covers pretty much questions that people ask often. How much boost,how long you running at that boost, what did you upgrade to run this n that safely. Maybe i thought it was implied that if something breaks that the poster would state what broke and after how many miles n such. Maybe I should up date my first post. Thanks for the input.
Im not trying to be negative but I could run a 50k miles stock and blow the motor because I never changed the oil and complain how unreliable the car is. I don't like this mileage indicator as a result of failure.

Ive seen failure pictures of other users on this board and most of them are pretty easily traced to something else that isn't a direct result of the modification installed.

I mean its simple if your house gets hit by an earthquake and burns down 2 days later it doesn't mean those 2 actions are related. Ive seen lots of examples of people modding theirs cars and doing no correct tuning to go with it and mix that with a very large community of "tooners" who don't know what their doing and a customer unable to tell the difference and you get inaccurate results. I'm not trying to rain on your parade because it would be nice to know I just have a hard time believing that anything useful will come of this thread.

To use myself as an example my car has 75k of extremely hard driving but Ive had no failures to date on the car because there are things I know not to do. As long as you don't let the car run on empty, run on the rev limiter, or run it out of oil your engine should last as long as it was designed to.
Running the car low on gas and driving hard introduces fuel starvation which makes the motor run lean which causes the pistons to get to hot or detonate and in tern either seize or throw a rod because it cant handle the stress being put on it.
Running it on the rev limit causes the fuel system to cut out which can cause the cylinders to run lean and cause detonation.
Oil is self explanatory run low and good by rod bearings. I mean low as in less than full not lower then the indicated line.
YodaThread starterFL · Jan 13, 2011#7
The examples you gave are very poor. If you are not comportment enough to know that you need to change your oil then you should not even be driving. In addition the are warning lights for low oil, gas, and the sort. I never intended to use the miles as an idicator of failure. It's simple states how long before you had your first problem while boosted. You seem educated on F/I so you know what problems that can happen.

"Ive seen failure pictures of other users on this board and most of them are pretty easily traced to something else that isn't a direct result of the modification installed. "
^^ that's what you said. So if the problem can be traced to something else then why would blame the modification? You would then exclude that and not report it. This whole thread is mainly focused on the engine. There are only a few things that will ever go wrong with it if not modified or boosted. Toyota made this car pretty much stupid proof.

"To use myself as an example my car has 75k of extremely hard driving but Ive had no failures to date on the car because there are things I know not to do. As long as you don't let the car run on empty, run on the rev limiter, or run it out of oil your engine should last as long as it was designed to. "
^^^ My question to this is are you boosted? You give people here little credit. Most members here if not all know what's good and bad for a F/I car.

Example as if I were to update my post with my first failure

Current miles while boosted: 8k
Failure: dang my engine crapped out on me. Inpected it only to find metal shavings from the side wall. Not sure what happened gonna look into some more.
Maybe a weak example but hope you get my point. So as a reader if I were to see this I would kno that I would have to look out for something like that possibly happening around that time and set in motions to prevent that.
Let me remind you everything starts with data logging. How do we know that we need an oil change like every 3k miles, how do we kno that we need to change our timing belt at xmiles. People have tested and logged all this info. The same concept applies here.

Sent from iPhone.
Blown_xaVirginia · Jan 13, 2011#8
ohhhhhhhh man, I have to set aside some time but i will post up my motor failures .
YodaThread starterFL · Jan 13, 2011#9
Looking forward to your contribution 👍
ParmasML · Jan 14, 2011#10
I agree with Yoda ... people need info on this engine since we are boosting without knowing where is the limit.

I am sure not every yaris owner has the cash to build a complete engine (excluding XBG :) )... so if we assure these people that with a set of pistons and rods you are safe until X Boost on an X turbo revving above X RPM, damn that would made my life better from this moment!

- Engine: Built (rods/pistons/) Complete Stock Head including bolts and springs
-F/I: Custom turbo kit T28
-Boost: 9psi till now
-WHP: Need to dyno before
-Management: Haltech Pro Sport 1000
-Fuel upgrade: 630cc injectors, Walbro pump, return line, modified custom rail, upgraded fuel regulator
-Fuel: Pump gas (91)
Miles on Boost: ~1k miles
Length of time: 2 years ( driven occassionally )
Driving style: Today I occasionally push it because I am still tuning on it
MISC: rev limit 5500 till now

Wait we forgot ignition!

-Ignition : 4 LS2 Dedicated Haltech Truck Coils with Silkolene HighTension Leads / Denso Iridium IK22 Spark Plugs (Step colder)

My main fears are the valve springs and head bolts. I am risking much on this ... I really need assurance I am safe until Xboost - XRpm
PETERPOOPOahu · Jan 14, 2011#11
-Engine: Complete Stock
-F/I: Zage turbo kit
-Boost: 8 psi
-WHP: 175
-Management: Greddy Emanage Ultimate
-Fuel upgrade: 1ZZ injectors, Water/Meth
-Fuel: 92
Miles on Boost: +/- 500 miles
Length of time: 2 months
Driving style: Only drive it on weekends, if that. I go WOT at least 3x when I drive it.

* I am throwing a CEL that is saying my 2nd o2 sensor isn't reading correctly.

EDIT:

Forgot to mention, before the current turbo setup, I have been running the Blitz Supercharger for around a year. Not sure how many miles I did while having it, but it had to have been over a couple thousand. I was running 8 PSI with that too, at 140whp (same dyno that I dynod the zage kit on).
Focus_Sh1ftNew Jersey · Jan 15, 2011#12
Engine: Stock
F/I: Zage Kit
Boost: 7 psi
WHP: N/A
Management: AEM FIC - open loop tuning
Fuel upgrade: None. Meth soon.
Fuel: 93 octane
Miles on Boost: 4k miles
Length of time: 4 months
Driving style: Never go WOT or even exceed 4k RPMs during daily driving.

Currently have no issues to really report, although I suspect I have a boost leak still. But that only limits max performance, the car drives great otherwise.
johnny_vitzHamilton, Canada · Jan 17, 2011#13
Engine: Stock
F/I: Greddy s/c kit
Boost: 8.5 PSI
WHP: 133
Management: E-manage Blue
Fuel upgrade: 1ZZ Injectors
Fuel: Pump gas (94)
Miles on Boost: 25,000 miles
Length of time: 2 years
Driving style: I hammer it several times a week and race 2-4 times a year
pimp my yarischicago · Jan 17, 2011#14
engine: stock
induction: custom T25 w/intercooler
Boost: 8 psi
injectors: stock
piggy back: AEM FIC open loop tuning
Fuel pump: stock 93octane
WHP: ?
5 months boosted about 6K miles
I drive it like I stole it. Floored several times a day.
YodaThread starterFL · Jan 17, 2011#15
^^^^lol pimp. Whats even sweeter is that it starts to spool for me at 1700rpm......
schragenColorado · Jan 19, 2011#16
-Engine: Complete Stock
-F/I: Zage turbo kit
-Boost: 4psi (break-in baseline tune)
-WHP: ~125-130
-Management: Greddy Emanage Ultimate
-Fuel upgrade: 2AZ injectors
-Fuel: 91 V-POWAAAA
Miles on Boost: <1k
Length of time: 1 month
Driving style: daily driven, try to keep it under 4k rpm for the rest of the break in period

* I am throwing a CEL that is saying my 1st o2 sensor is running lean AND rich, that will most likely change when i go performance tune
ParmasML · Jan 19, 2011#17
Thanks for the persons who posted a clean answer and of course for participating

Cheers and lets keep the little one boosted :)
Focus_Sh1ftNew Jersey · Jan 19, 2011#18
* I am throwing a CEL that is saying my 1st o2 sensor is running lean AND rich, that will most likely change when i go performance tune
That makes four of us that have had the AFR sensor flip out after seeing boost for awhile.

Definitely a strange problem, I suspect you guys that are tuning in closed loop may eventually have problems of the car randomly switching to open loop like I did. Would definitely recommend keeping an eye on open loop/ closed loop status.
schragenColorado · Jan 19, 2011#19
Originally Posted by Focus_Sh1ft ↑
That makes four of us that have had the AFR sensor flip out after seeing boost for awhile.

Definitely a strange problem, I suspect you guys that are tuning in closed loop may eventually have problems of the car randomly switching to open loop like I did. Would definitely recommend keeping an eye on open loop/ closed loop status.
im sorry im pretty noob still, how would i accomplish keeping an eye on open/closed loops?
Focus_Sh1ftNew Jersey · Jan 19, 2011#20
Originally Posted by schragen ↑
im sorry im pretty noob still, how would i accomplish keeping an eye on open/closed loops?
You need to monitor it with an OBDII device. Scangauge is the perfect thing to have for the boosted due to all the things it can display AND read codes. 👍
schragenColorado · Jan 19, 2011#21
ahh well i guess that will bump up on my list of things to get ASAP
Focus_Sh1ftNew Jersey · Jan 19, 2011#22
Agreed, having a code reader is a must.

Being boosted isn't exactly cheap but you can't tell me it's not worth it 😁
cali yarisCanoga Park, CA · Jan 19, 2011#23
Being boosted isn't exactly cheap but you can't tell me it's not worth it
That might have to go into my sig file 😆
monchyxbPuerto Rico · May 8, 2011#24
Engine: Stock
Induction: Greddy 14g turbo/custom ic
Boost:10psi
Whp: ~180
Management: Aem FIC
Fuel upgrades: Walbro 255lph/ Perrin Fuel Rail/ 2az injectors
Fuel: 93oct
Miles on boost: 1.5 years ~ 15K
Driving style: Very Agresive! I floor it everytime I can!
Other stuff: 2ZZ throttle body/ Custom 2.5" exhaust
YodaThread starterFL · May 8, 2011#25
Thx for contributing
Just thought about this but shouldn't you be putting out more power than that @10psi? I mean you turbo is bigger after all and has a higher cfm. Maybe it the tune?
scioncrewHB · May 9, 2011#26
guys the biggest reason of engine fails is an improper tune. no matter how well you build your motor a bad tune will kill it in a hart bet.

Anyways here my Xb

Engine: Built (bore/sleeved/rods/pistons/springs/head work/cams)
F/I: Custom turbo kit T28
Boost: 14-20
WHP: 280
Management: AEM EMS
Fuel upgrade: 632cc injectors, Walbro pump, return line, modified Perrin rail
Fuel: Pump gas (91)
Miles on Boost: ~30+k miles
Length of time: built the motor in 2007 4yrs
Driving style: It was my daily driver untill i retired it and sold it to Garm.
MISC: rev limit 7500
monchyxbPuerto Rico · May 14, 2011#27
Originally Posted by Yoda ↑
Thx for contributing
Just thought about this but shouldn't you be putting out more power than that @10psi? I mean you turbo is bigger after all and has a higher cfm. Maybe it the tune?
I really don't know, but the turbo is not that big.. I mean the max hp it gives is 250-260 +~. the tune has always been a problem, when I go WOT it leans and then reajusts and goes rich. maybe that affects the power. I'll take it to the dyno to see for real!
turboecho2005Ottawa, Ontario · May 16, 2011#28
Originally Posted by scioncrew ↑
guys the biggest reason of engine fails is an improper tune. no matter how well you build your motor a bad tune will kill it in a hart bet.
You have it right on. I am 11.1:1 compression running 8.5psi but a rock solid tune. weeks it had spent on the dyno to make sure it can take the abuse every day with that compression. Turbo is a GT2871R
YodaThread starterFL · May 16, 2011#29
Is that on a built engine or stock? 11.1:1 and pushing 8.5... You must have some magic elixir or something if it's still stock. What car is this btw?
turboecho2005Ottawa, Ontario · May 17, 2011#30
Originally Posted by Yoda ↑
Is that on a built engine or stock? 11.1:1 and pushing 8.5... You must have some magic elixir or something if it's still stock. What car is this btw?
Its my 4AGE 20v blacktop motor. Internals are bone stock.
YodaThread starterFL · May 17, 2011#31
standalone management?
turboecho2005Ottawa, Ontario · May 17, 2011#32
Originally Posted by Yoda ↑
standalone management?
yes. megasquirt
why?harnett county NC · May 18, 2011#33
look at his sig. Twin engines? I'd love to see that thing at the drag strip.
Mister ZRancho Cucamonga, CA · May 24, 2011#34
Was wondering the guys who posted that there using 1zz or 2az injectors, what size? or are these stock 1zz/2az injectors or upgraded versions?
monchyxbPuerto Rico · May 25, 2011#35
Originally Posted by Mister Z ↑
Was wondering the guys who posted that there using 1zz or 2az injectors, what size? or are these stock 1zz/2az injectors or upgraded versions?

The 2AZ injectors are stock injectors and the size is 370cc.
YodaThread starterFL · Jul 18, 2011#36
Still at 10psi and going strong.
Blown_xaVirginia · Jul 19, 2011#37
This month marks 2 years the Ptuning spec ss block has been in my car... it has been raced since the 1st weekend and driven every day. Now running 27psi as of last week.
Bluevitz-rsOshawa, Ontario, Canada · Jul 20, 2011#38
27 psi! What are you running diesel in that thing now LMAO
Blown_xaVirginia · Jul 20, 2011#39
Originally Posted by Bluevitz-rs ↑
27 psi! What are you running diesel in that thing now LMAO
lol. dont tractor pull tractors run like 100psi?

Still pump gas w/wmi. We are doing an e85 test tune next week. Another note, took car to local 1/8 mile today... traps 94mph in the 1/8 so my new quarter time should be 12.0 @ 119. Ill confirm soon enough.
Bluevitz-rsOshawa, Ontario, Canada · Jul 20, 2011#40
that's just re-donk-you-luss
pimp my yarischicago · Jul 21, 2011#41
9psi waiting for cooler weather for a dyno run. Aem fic w/2az injectors and 255lph pump. Boosted for 10 months now
Focus_Sh1ftNew Jersey · Jul 21, 2011#42
27 psi is just plain filthy lol....
YodaThread starterFL · Sep 15, 2011#43
Might have finally broke it @12 psi spike. Went to go in third and missed, loud bang and felt like i hit a wall. Vacuum is bouncing around and i can hear some grinding. Gonna check it out some more in the days time. Might just have a small vacuum leak. Gonna get a compression test also to see where i am at after all this time.
I have been beating it into the ground for the last 3 months while I saved up 4k for a rebuild. I think it might still not be enough sigh...
Bluevitz-rsOshawa, Ontario, Canada · Sep 15, 2011#44
Ooooooo that sucks.

ok you missed like it didn't go into gear or missed like you got it into gear with a whole lot of grinding?
YodaThread starterFL · Sep 16, 2011#45
So good news 175 all across n this is me running it at 10psi hard. Gotta check to see if the turbo is still good tho. Need oil catch can and a retune and I will see what new numbers I will have for u guys. I am way over due for a clutch upgrade also. Can't shift into third if I am pushing it. Hoping that it just needs a flush and not the same problem that I had last time. O and Pimp get you car on a Dyno man!
Focus_Sh1ftNew Jersey · Sep 17, 2011#46
Healthy compression after 3 months of beating on it at 10 psi? That's great news man... Maybe 10 psi will become the new 8 psi? 😁

Seriously though, I think I speak for everyone when I say I appreciate what you're doing with your car. This will give us great information on how much a 1NZ can take before it finally craps out.
pimp my yarischicago · Sep 18, 2011#47
I had some problems with the car dying out when going to neutral from high boost after the blow of valve pops. I am working on a recirculating hose for blow off gases. So far it is working good. Just need to improve the design a little. The colder weather is giving me some stout power. Much better then the 90 degree shit.
ParmasML · Sep 19, 2011#48
Forgot to post on here my new tune:

We got the 1NZFE running 211Bhp @ 6500rpm / 184Torque @ 4850rpm @ 9psi on a GT2560R.

To refresh memory stock: head bolts / OEM gasket / Complete OEM head (no porting)

Presently I am re-wiring the AEM boostsolenoid to the Haltech Ecu and pump it up till 14psi boost on pump gas + octane booster.
ecc_33OHIO · Sep 30, 2011#49
Originally Posted by Bluevitz-rs ↑
27 psi! What are you running diesel in that thing now LMAO
Easy lol... Thats all i know....My truck was 720 at the wheels last dyno that was on...I just wish the 11.94 was a little lower but 8 bent rods changed my tone. Now time for a built engine with that big single charger hummin on top👍
YodaThread starterFL · Jan 21, 2012#50
Had a rough idle problem for the last month and couldn't figure it out. Tried everything now I am looking at the engine. Will post result later on.