Yarisworld Archive

Clutch & Flywheel Installation help Needed.

10 posts · 9,640 views

victorddrOriginal postToRonTo · Jan 8, 2011#1
Hi, I am planning to have my clutch and flywheel replace at home. Just wondering if anybody have that done at home before? What kind of tools I will need to get this done properly? If there have some pictures for the whole process will be great.

Thanks

Victor

Replies 9

yaris2010RSAngus, Ontario · Jan 9, 2011#3
lol, are you joking? personally this is something for me that i would take to get done just beacuse its my dd and ive never done it before.....

i have watched a few videos and read about how to replace the clutch and as far as i understand standard socket set and air tools will be enough. ull also need a seperate jack to hold the tranny up (i have heard a motorcycle jack works great for this).

let me know when u wanna do this, if ud like the help ill be willing to lend a hand and im sure a few other gta guys may like to come for moral support.

unless u find someone who has actually done it on a yaris before, i would set aside a weekend for it.
victorddrThread starterToRonTo · Jan 9, 2011#4
Originally Posted by yaris2010RS ↑
let me know when u wanna do this, if ud like the help ill be willing to lend a hand and im sure a few other gta guys may like to come for moral support.

unless u find someone who has actually done it on a yaris before, i would set aside a weekend for it.
Thanks for your help first, I know it will be a tough job to do at home. I am planning to do it in my underground parking in early or mid February. I am ordering a Fidanza lightweight flywheel and OEM Exedy clutch from E-bay this week.

Do I need an Engine lift? Just wondering if I will have enough clearance to pull the Trans Out from bottom with the car on jack stand.
victorddrThread starterToRonTo · Jan 9, 2011#5
Originally Posted by cali yaris ↑
Thanks Cali Yaris forwarding this thread. I read the procedures on removing the Trans. Seems easier than I thought. Hopefully I can get that done within a day or two.
H3LlIoNMidatlantic · Jan 9, 2011#6
It can be done in one, but you will at minimum need a transmission jack, a floor jack, and some jackstands, as well as a second person, or an oil pit and tall tranny jack. It's really not that hard...if you have any questions about the procedure, you can PM me here or @ MI and I will be more than happy to help in any way I can. I don't always follow threads on here, so PM is probably best. I'll post the PMs to the threads though so that anyone else will have the info.
victorddrThread starterToRonTo · Jan 10, 2011#7
Originally Posted by H3LlIoN ↑
It can be done in one, but you will at minimum need a transmission jack, a floor jack, and some jackstands, as well as a second person, or an oil pit and tall tranny jack. It's really not that hard...if you have any questions about the procedure, you can PM me here or @ MI and I will be more than happy to help in any way I can. I don't always follow threads on here, so PM is probably best. I'll post the PMs to the threads though so that anyone else will have the info.
Wondering how high I should lift the vehicle up to get enough clearance to pull the tranny?

Can I use the floor jack to lower the tranny or I will need an tranny jack adapter to do the job?
yaris2010RSAngus, Ontario · Jan 10, 2011#8
i watched a video on youtube once on how to change a clutch (it was on a saturn) and the person did not need to drop the tranny, he basically just unbolted it and pushed it over and tied it off to a wood crossmember he placed ontop of the car that he also tied the engine off too
victorddrThread starterToRonTo · Jan 10, 2011#9
Originally Posted by yaris2010RS ↑
i watched a video on youtube once on how to change a clutch (it was on a saturn) and the person did not need to drop the tranny, he basically just unbolted it and pushed it over and tied it off to a wood crossmember he placed ontop of the car that he also tied the engine off too
Sounds like get a big brock of wood will be handful to hang both of them on the car while working under.

Thanks for the info.
H3LlIoNMidatlantic · Jan 10, 2011#10
yaris - with the frame in the yaris, there is not enough room to back the tranny far enough away to work effectively. It's not really a big deal to drop it though...I literally picked it up off the jack and carried it to the work bench...maybe might be 60 pounds or so, if that.

Victor - I would use a 4 x 4 across the strut towers if you don't have a cross bar.